Red5 portdela

...freelance background: - MongoDB Server maintenance. - Linux expert for Ubuntu Server 20 LTS. Estimated time: The time assigned would be 7 days with a maximum of up to 14 natural days. It this time is reached, the project could be cancelled. Material to be provided to the freelance: 1 - The script to create the mongodb server. 2 - The credentials: - A superuser name. - Password. - IP address. - SSH port. - Big databanks in TSV format. ...

We want to deploy an app in Microsoft Teams so that users have a button to click to reach the IT portal where they'll be able to submit tickets and access reference informations. We already have the web page done. All we need in a app in teams that we can deploy that brings people to that page.

them in a local file, and serves them back on request. The name of the file is given by the parameter bbfile. Messages are identified upon storage by an unique number established by the server, and by the “sender ” of the message (as provided by the USER command explained below). The clients connect to our server on port bp. We also assume a production environment so that we implement concurrency control. Contact for more details of the project

We have few sensors connected to esp32 and we would like to show the values in hdmi monitor via esp32. You need to establish uart, I2c or any other (not mqtt) connection between esp32 and I2c and make them displays le. You don't need to worry about sensors, your project will be only to connect esp32 and raspberry and display via hdmi port

We need someone local to visit our client in Utah United States to fix some simple cosmetic issue of the headphones which is to change the ear cushion of the headphones and put the charging port cover on. We can provide video tutorial.

I need help to be able to switch the ports as needed ( I typically read form the huslylens port and later write to the MicroSDcard). I have a huskylens device connected to the Arduino pins 0/1 for serial communication. I also added a MicroSDcard in the ICSP pins of the Arduino board to write / store data. I am able to to this in a loop fashion (see attached code). but when I want to listen to the huskylens and write information from that to the MicroSDcard , I fail. The project is for a Elegoo Smartcar 4.0. I am attaching the shields , a few relevant programs (optional to review).

Hi, We need assistance to set up Elastix last version 5 1. 7 internal extensions 2. 4 fxo ports with analog lines (sangoma a400 card) 3. Dedicated outgoing calls from extension through the correct fxo port 4. Incoming call to dedicated extension on chosen fxo. 5. Fax to email Reach me by whatsappp 198o322872two

I have node api with ip add and port , on pushing to production , its not working with https , so can we just fix that

I have a small script running on raspberry that reads a serial port connected device and runs a query with the result of what it reads, with that result it will activate some pins. I need to make 2 changes: 1 - Test the internet connection, and always activate GPIO PIN if no connection 2 - I have a device that is running ok with Putty bu when connected to Raspberry it will not reads any data Please take a look at the attached script.

Content: Video shoot onsite of business premisses, company announcement from executive team. Feel: Fun, casual composition with light hearted. Run & gun/reportage Shot: inside or outside [factory setting] large area. Location is Adelaide, 20mins from CBD: 150 Port Wakefield Road, Cavan Shoot time: 1hour Date: Friday 30th September 2022 Start time: 9am or earlier Props include, Trucks, vans, utes, trailers, factory floor, spray paint shed etc. 3 main speakers: 2 male & 1 female [aged between 30 - 45] Will need to supply lapel mics, lights as well as shoot footage at HD 60fps. deliverables: footage, colourised and audio enhanced. In house editing preferred if can be shot in the morning then footage delivered by noon.

I have a working nginx config for a reverse proxy that needs to be mapped to Apache. Should be relatively straightforward, main issue is https to http proxy. Web server sits in front of a series of react js apps that need to be able to communicate with a backend listening on a designated port. proxypass /backend to http://localhost:<port>. Server sits on public internet and domain name resolves to public IP, incoming traffic is HTTPS.

I need to get structural plans for this basically a large covered RV port. Vinyl covered. See my PDF for more explanation. I need structural plans for permit.

...Node-UI system such as in the given pictures. Please make them nice with shadows, colors, transparency etc. Than I want to be able to add a new node (custom) with a self-defined amount of input-and ouotput nodes. The node itself represents a program that I can specify (an .exe) and the incoming Path should transport data to that program. There should be different input possibilities: Local port, Local network port (switchable adapter) and stdin. The data the comes in should be structured visually (hex editor in which I can colorize and name certain positions) It should be possible to take a specific incoming element into a new outgoing node. Example: I have the string "echo test". I describe the first part as seperated by space. I color it red. (echo is red ...

Needs to port simple assembly code on 64bit and working on LKM code

Sound Explorers Audio Archive is a new open source Windows application that facilitates the archiving of audio recordings, together with associated documentation and videos. We are in the process of applying for funding to build a web interface to provide access to the recordings and their documentation and port the existing application to macOS. For b), we wish to engage the services of a Mac Developer. About the Task The application is written in C# (version 10) for .NET 6.0. The user interface is written with the Windows Forms API, which prevents the application from being run on operating systems other than Windows. So, to allow the application to run on both Windows and macOS, we plan to convert the user interface to .NET MAUI. As Windows Forms does not support the Mode...

...all values and setting options, and make them available in LabView. To test and accept the VIs, however, VIs for all six reactors and all 4 parameters/RS inputs need to run in a simple test bench in parallel for all six reactors and acquire data and write to an excel file. Programming needs to be somewhat intelligent and minimizing the amount of code, i.e. recycle a VI just set different USB / RS port settings. I am open to suggestion on how to best / most effectively achieve this. Let me know what your rough time estimate is for each step and what cost. Initial Budget is for the RS-232/485 driver only. As I do have limited experience with RS-232 and RS-485 and the devices are in California, whereas you work remote, we may have to do trouble shooting on the cables and wiring. ...

We need someone to manage linux server new and backup old sevrer to new one task below whmcpanel Installation CloudLinux Installation ConfigServer Security & Firewall - csf v14.17 installtion imunify360 Installation Mail Setup smtp Security advisor security check Cpanel User moved and website runing issue check whmcs issue comperlsory sftp installation port change for ftp open server backup configuration Apache installation as requirement php version installation as required Manage Database MySQL/MaraDB Manage Cphulk CageFS CloudLinux Manager ConfigServer Security & Firewall ConfigServer eXploit Scanner Configure ClamAV Scanner Imunify360 WordPress Toolkit Cron job tweak setting ftp bacup donload path setup name server manage as resslae name server

Hi. I need a TCP app in VB.net, that can connect to some servers, by TCP, and receive all information from them to a textbox, with a label on appear the IP, ie. Server - msg: blah blah blah. I would like a listbox where I can insert ip and port like this: ,80 - ,80... I need to connect to all ip's at the same time and receive all information. That's all Thanks

This nearly works but the programmer did not finish (was paid) and communications were sporadic. The file describes what it is and what needs fixing. Probably very little needs fixing. This is for somebody familiar with MS Visual C/C++ and driving COM ports under Windows. Target is win7-64 or higher but it would be nice if it runs under winXP. I have also uploaded a free com port emulator but I don't think this will be needed. I think the errors will be obvious.

SEO of my page with 7 keywords boat charter in andaman private boat from port blair to havelock yacht party in andaman yacht in andaman boat booking in andaman private speed boat from port blair to havelock yacht rental in andaman

It stores data in Flash received on serial port Want to interface Nuvoton M032LE3AE with Flash SST25VF016B

I need only non-UI 2 functions of the following Android SDK ported to pure Dart so I can use in Flutter Web, iOS and Android: I only need to be able to execute the following example code: htt...Android SDK ported to pure Dart so I can use in Flutter Web, iOS and Android: I only need to be able to execute the following example code: 1. new SimplifyMap() 2. () Also need you to publish on pub.dev. Alternatively, you can just instead port the () function from Please let me know cost and time frame.

This project is about understanding the serial protocol used by a 3 phased solar inverter. The inverter has a serial port that can be accessed with a proprietary software but because the company that produced the inverter does not exist anymore we can no longer find the software, so we are willing to pay somebody to tell us how to send serial commands to the inverter in order to configure it and monitor it. We have the inverter firmware available, as well as the EEPROM and we will send that firmware to interested parties. The firmware is running on a Infineon TriCore CPU. The end goal of this project is to write a documentation on how can we controll the inverter using serial commands. If there is any CRC checksum involved the winner will have to send the crc generation algorithm ...

We have a USB Device for which we have developed service objects based on Unified POS Standards (). We are looking for someone to port the .Net service object to JavaPOS () and write a test application for the device and expose the functionality of the service object.

Prosimo, vpišite se ali se prijavite za več podrobnosti.

This is a Transportation Business. Would like to show Air/Barge/Train/Trucking This is a logo for a polo type of shirts on the Left side Modern or Concept of the Transportation Area. This will be for an Embroidery on the Pictures. the name will note as Alexander-Cairo Port Authority

...work out a bespoke electrical circuit for a slave / tandem heating system which includes a gavity fed standard Y configuration CH and HW gas boiler with a mid port valve and now a slave pellet boiler stove. The pellet boiler stove has an integral pump which activates when the water in the boiler reaches 70c. At this stage I want the system pump to be activated and water to be pump into the HW cylinder until the cylinder thermostat reaches 70c at this stage the mid port valve would activate both grey and white wires to dump ongoing hot water into the central heating. Importantly I want it to do this using the existing system pump, mid port valve and cylinder thermostat that is part of the gas system. It is the case that the two ststem will not run at the same tim...

...work out a bespoke electrical circuit for a slave / tandem heating system which includes a gavity fed standard Y configuration CH and HW gas boiler with a mid port valve and now a slave pellet boiler stove. The pellet boiler stove has an integral pump which activates when the water in the boiler reaches 70c. At this stage I want the system pump to be activated and water to be pump into the HW cylinder until the cylinder thermostat reaches 70c at this stage the mid port valve would activate both grey and white wires to dump ongoing hot water into the central heating. Importantly I want it to do this using the existing system pump, mid port valve and cylinder thermostat that is part of the gas system. It is the case that the two ststem will not run at the same tim...

Need app updated for Android and ported to iOS.

My project consists in a circuit board which is responsible for communicate with the internet and triggering 4 electronic locks of 3V 1.5a using relays. Due to high inductance generated by the electronic locks, it is necessary that the circu...lithium battery which must provide an autonomy of at least 8 hours. This circuit will be activated when the site is without power. To connect the ESP32 to the internet, a 4G modem is connected to the board. The board must have a female USB connector to power the 4G modem. The female USB connector must have a circuit capable of having its power interrupted by a command sent by an ESP32 I/O port (After a few hours of initerupted use the 4G modem loses its internet connection and it is necessary to turn it off and on to get it working...

Solicito analista IT para trabajo remoto Conocimiento completo en: Windows server versiones 2008 a 2022. Vmware Hyperv Manejo de panel de correo Tcp/ip Nat, routing, port forwording

Arduino sketch to get time form Internet The board as Ethernet port (Wiznet 5500), AT24CMAC402 EEPROM (to get MAC adress and store variables) and RTC (DS1307) We we need: 1. Initialize the Ethernet interface using the EEPROM stored MAC 2. Use the timezone lib to get the time from NTP server 3. Update the DS1307 and set a flag (inSync=true) 4. Send the time to the serial port Notes: The time must be read from DS1307, so it can output time even if not syncronized. If it cannot get the time form NTP server, the inSync Variable must be set to false (after a few tries of course) The timezone, daylight saving and ntp server must be configurable and stored in EEPROM This variables must be set using the Ethernet port.

I am using the google coral devboard (imx8mq) instead of raspberry pies because pies are hard to get. I would like to be able to flash new code onto an attiny10 with the coral like I could with the pi. The github claims it is simple to port the code to any platform even a microcontroller, but it's a bit over my head.

I have a C++ library which is a parser that I want to generate a webassembly to use in web application. The main deliverables are: 1. Compile the library to WASM 2. make TypeScript npm package ready for publishing on npmjs The library is located at:

...and message dispatch services for Doctors, Lawyers, Funeral Homes, Plumbers, and other professional service companies. Call Center is 24x7. Dependability & Reliability are a must. Bilingual Native/Advanced English & Spanish Close Proximity to US market. Central + South America + Caribbean Reliable Power & Internet / or Inverter with Batteries Windows PC with admin privileges Available Ethernet port on your router Noise Cancelling USB headset 8-hour shifts, 40-hour workweek 1-weekend shift per week ( Sat / Sun ) required. Day Shifts 7 am to 3 pm, Evening Shifts 3 pm to 11 pm Job Description: Processing incoming calls for various businesses throughout the United States and the world. Full training is provided. This is not a selling or "outbound calling"...

I need a programmer to test run previous build and fix any bugs to make customer experience smooth and easy. it is patient web portal to storage files and information for viewer between provider and doctor. Create new record and give email notification to the dentist and provider.

Hi Ahmed M., I need your help on single-port ROM verilog project. Please have a look to the attached file and let me know. Thanks

Hi Everyone, We are looking for freelancers who are able to assist us with the following project. Background: Our current Windows Server is sitting on a device which is reaching the end of its life. This server hosts our AD , DNS , GPO, Shared Printers etc and is sitting on a public ip address. We have obtained a new ser...sitting on a device which is reaching the end of its life. This server hosts our AD , DNS , GPO, Shared Printers etc and is sitting on a public ip address. We have obtained a new server which we wish to migrate the server to and will need a freelancer who is able to perform the migration with minimal distruption. We will assist with the networking portion of things, ie reassigning the public ip (port fowarding) to connect to this new server instead of the o...

I have a local mediawiki running on a debian VM. I also own a domain through godaddy that's now being hosted via cloudflare and proxied. Simply, i'd like to use this mediawiki on the web by pointing it to my domain (example: ) I also have a LoadBalancer (KEMP Load balancer) with a certificate from cloudflare that i would like to use for thi...a debian VM. I also own a domain through godaddy that's now being hosted via cloudflare and proxied. Simply, i'd like to use this mediawiki on the web by pointing it to my domain (example: ) I also have a LoadBalancer (KEMP Load balancer) with a certificate from cloudflare that i would like to use for this set up. By using the Kemp loadbalancer i can just have a single port 443 opened on my home router.

i need a simple code for : my sip voip user name and password and domain with port 5060 (we can enter this inputs at the code) calls by browser via our registered sip account we need to open many call >> we need to do that by opening another browser tab or any way to do that this project should finish maximun at 5 hours =============== if you have a ready built application i will pay the same amount thanks

...learning project and there are a lot of other things that we will be doing onwards. Let me try to explain what I want to achieve, I have 3 separate domains registered (please note its not sub domain) and pointing to my Static IP. On my main router I can forward port 80 to a computer (Windows 10 Pro) with IIS and website setup. It all works fine and I can load the web page. I have 2 more computers with Windows 10 Pro, IIS and some other websites are configured there as well, but we can't port forward to these computers as we know we can port forward one at a time. You will be helping me to setup some solution to overcome this problem, I have OPNSense firewall or anything else you can think of? I also have HP and Cisco switches to create separate networks...

...features: 1. Generate UUID for new users and sync with control panel 2. Automatically obtain server groups/lists from the control panel server 2. Connect to the lowest load server within the same group, unless the customer choose on his own favour. 3. Fallback to any other available server within the group when there’s an issue on the current server is down 4. Do Not generate or save logs 5. UDP port forwarding automatically (public Wi-Fi may block high UDP ports) Optional: Add TCP tunneling functionality (Some enterprise firewalls block WireGaurd by default) Control Panel with database (for admins): 1. Add, delete or edit wireguard VPN servers, and monitor their status (Loads, Up/Down) in CLI 2. Group VPN servers by geo-locations 3. Obtain UUIDs from WireGuard apps 4....

I have a project that requires using Silabs MGM12P Mighty Gecko Modules to provide a Zigbee network to collect data. One MGM12P is to be the Zigbee Coordinator and collect data from the MGM12P module configured as a Zigbee End Device. The End Device module function...analog inputs 4) Read Battery Voltage 5) Read Device MAC address 6) send a packet with all of the above information 7) Receive acknowledge from Coordinator 8) go to sleep for 10 minutes Repeat process The Coordinator module functions are 1) Connect to the End Device when it wakes 2) Receive the packet for End Device 3) Respond to End device with Acknowledgement 4) Output packet on the serial port / usb 5) Wait for next connection Simplicity Studio has the tools for the project including a compiler for the Mighty G...

Are you a video blogger? I need you to publish videos on youtube, tiktok, FB and other platforms. The following is the product information 【7 IN 1 Power Strip with USB】This USB power strip with 4 AC well-spaced outlets and 3 USB charging ports can power up to 7 devices simultaneously. The AC outlets are rated to provide 1875W/15A power. The USB ports provide 5V/2.4A/12W for each port. This travel power strip is small enough (4.0x4.6x1.2 inches, 0.9 lb) to pack in luggage, making it very convenient to power your phone, tablet, Bluetooth Speaker and more at home or on-the-go. 【Indoor & Outdoor】The IPX6 rated waterproof power strip is resistant to rain, water splashes, and even flowing water. Water that flows into the sockets will flow out through the drainage holes on the back. ...

As the title says - we need to install and configure Mautic so that we can replace our current email drip provider. We need to have it up and running so that it can replace our current software - so you will need to port over the email list and also all of the emails that are sending. This should be easy for someone familiar with Mautic. We will be using Amazon SES for the email sending.

I have a RFID device which send data on serial port. we want to read this data on orange PI PC plus and operate 6 relays according to some conditions.

We have a Lenovo Switch with fresh CNOS (no prior configuration) we need help to do the following: - Upgrade it from 10.6 to the latest version - Configure VLAN trunking + access to range of vlans - Configure SNMP (via mgmt port) The freelancer will be given a a way to SSH into the switch (with an admin account) in order to configure the switch Please only bid on this project if you have configured Lenovo Switches before.

i need a simple code for : my sip voip user name and password and domain with port 5060 (we can enter this inputs at the code) calls by browser via our registered sip account we need to open many call >> we need to do that by opening another browser tab or any way to do that this project should finish maximun at 5 hours =============== if you have a ready built application i will pay the same amount thanks

This is a project based in the port of Antwerp (BE) 10 cooling containers (reefers) need to be connected to a power cabinet. Each reefer consumes 9KW, but only 50Kw is available. The power needs to be switched between the reefers consequentually (time based). The reefers can be swithed on/off via a relay. Each reefer socket has a power meter. In case a new reefer is connected it needs to be prioritized.

Hey I am seeking developer who are expert of Google cloud platform and Docker Our previous developer has installed project on Docker so project is running 3000 port and 9000 port on Docker but we can't call the project site with Installation of project on Docker is exact. he installed on his local Mac machine with Docker and when we call http://localhost:9000, http://localhost:3000, the project is running on chrome browser Please bid