The term CAD/CAM denotes computer aided design and computer aided manufacturing. It is usually referred to in the context of software tools that perform a wide range of engineering functions. Selecting a proper CAD/CAM system is important to ensure that the stages of conceptualization and final production are under proper control. If you are foraying into computer-aided design and manufacture, you need an expert. There are many freelancers who can do this job for you at a relatively low cost. So, post your CAD/CAM job here and make your life easier! Najem CAD/CAM Designers

Filtriraj

Moja nedavna iskanja
Filtriraj po:
Proračun
do
do
do
Vrsta
Znanja
Jeziki
    Delovno mesto
    161 najdenih del, po cenah EUR

    features; -Optimized design for easy 3d printing -The product must withstand exposure to outdoor and indoor conditions; (Indoor greenhouse and outdoor crops). Design -Protection of electronic components, prevention of technical problems -Accessibility to disassemble and assemble easily. -The design must be done so that everything that is needed for the assembly and assembly must be possible all to...

    €359 (Avg Bid)
    €359 Povprečna ponudba
    4 ponudb

    This is for a condominium in Winchester, VA. We wish to demolish two small interior walls in the kitchen and place an island (with cabinets underneath) where the walls currently sit. We need to make sure that the walls we want to remove are non-loadbearing. Please refer to photos included with this listing. We already have a remodeling company lined up, but the homeowners association requires eng...

    €377 (Avg Bid)
    €377 Povprečna ponudba
    4 ponudb

    El proyecto se radica en la ciudad de Esmeraldas - Ecuador, y se centra en la construcción de viviendas prefabricadas de interés social. En esta ciudad se evidencia un porcentaje exageradamente alto de personas que viven en condiciones de pobreza extrema, el proyecto busca llegar a estas familias con viviendas de bajo costo, que les permitan vivir con dignidad y con cierta comodidad...

    €5 / hr (Avg Bid)
    €5 / hr Povprečna ponudba
    4 ponudb

    We need to draw and calculate building's design with solar and non solar building's. Singapore base office building Weather in Singapore Drawing 1 & Data Details to Run Office Building without Solar Panel Layout 3-4 Levels 20,000 Drawing 2 & Data Details to Run Office Building With Solar Panel on Top and it should be 15-18% Layout 3-4 Levels 20,000

    €129 (Avg Bid)
    €129 Povprečna ponudba
    1 ponudb

    Redesign sewing machine thread holder. Recently started sewing, and the most frustrating part my mother always complained about is true, There is an easy fix in my brain. It will revolutinize sewing machines and the patent we will own will generate a huge income! Need someone who can locate a machinist to make new parts. This is super exciting!!!!!!

    €396 (Avg Bid)
    €396 Povprečna ponudba
    6 ponudb

    Have setup cnc milling machine with the help of dremel extension shaft and converting our unused anet a8 3d printer into a cnc miller. Need help related to configuring the same along with one small design to successfully cut. Would be requiring assistance over call so to fully complete the object. If you are available for that then only bid. Best regards

    €11 (Avg Bid)
    €11 Povprečna ponudba
    1 ponudb

    Our organisation require a good experienced tutor who can record videos of Solid works software with examples and projects

    €11 / hr (Avg Bid)
    €11 / hr Povprečna ponudba
    14 ponudb

    Hi, My name is sherazulhassan. I am civil engineer in autocad

    €356 (Avg Bid)
    €356 Povprečna ponudba
    17 ponudb

    Help on a commercial interior fit out project to determine lighting plan

    €26 / hr (Avg Bid)
    €26 / hr Povprečna ponudba
    31 ponudb

    Our organisation needs a tutor of Staad pro and 3Ds max softwares who can record videos and he/she should have experience in it and videos will be in English

    €8 / hr (Avg Bid)
    €8 / hr Povprečna ponudba
    1 ponudb
    CFD Analysis for Datacenter Cooling 6 dni left
    VERIFICIRAN/A

    CFD Analysis for Datacenter Cooling Following scope is considered -CFD Analysis will be performed 1. To obtain Airflow distribution of HVAC System 2. To find Room temperature distribution for full load and HVAC sys. Running 3. To find Failsafe time for the server racks in case of a power outage for the HVAC system Please refer attached drawings Kindly share your quote with a timeline for comple...

    €327 (Avg Bid)
    €327 Povprečna ponudba
    8 ponudb

    Somos uma empresa de design e decoração de interiores no mercado há mais de 20 anos, e trabalhamos em projetos de interiores de várias escalas. Estamos localizados no Cacém. [prijavite se za ogled URL] Procuramos desenhador CAD para execução de plantas para projetos de interiores. Criação de layouts e disposição de mobi...

    €155 (Avg Bid)
    €155 Povprečna ponudba
    18 ponudb

    I have a picture that I need designed in something that can import into a CNC machine. I believe I need the file to be an SVG file.

    €265 (Avg Bid)
    €265 Povprečna ponudba
    41 ponudb

    We're a relatively new company that deals with electrical house wiring, repairs, maintainence and installations of electrical appliance. We deal with residential, commercial as well as industrial clients So i need help in making a professional and a simple logo for my electrical firm. Can yall help me out?

    €11 (Avg Bid)
    €11 Povprečna ponudba
    16 ponudb

    Embarking on a project to build an infill apartment building so i will need a result oriented freelance architectural designer to draw the floor plans for construction.

    €137 (Avg Bid)
    €137 Povprečna ponudba
    41 ponudb

    I want to build a modern bungalow with a detached garage and a pool in the backyard. I need the floor and elevation plans to start construction.

    €338 (Avg Bid)
    €338 Povprečna ponudba
    72 ponudb

    I am looking for a Playhouse Load analysis - Wind load , Self weight & Snow load analysis experts. CONTACT ME IF YOU ARE A RIGHT PERSON.

    €126 (Avg Bid)
    €126 Povprečna ponudba
    9 ponudb

    House plan Size - 4000 sq ft + Basement I have concrete drawing for floor plans and also abstract drawing/idea for basement. Need the Floor plans, elevations, autocad file etc... If you are also expert with Structural designs please help in getting itemized fees for both Floor plan and Structural plan with engineer stamp. (State of NC) Need to submit and pass the plan to County.

    €1293 (Avg Bid)
    Zagotovljen
    €1293
    7 vnosov
    Civil Engineer/Architect needed 5 dni left
    VERIFICIRAN/A

    Civil Engineer/Architect with project estimating knowledge needed. The candidate must: - Know how to read Architectural, Interior Design, and Electrical drawings. - Be familiarized with Technical Specifications, Project Manuals, and RFI logs. - Have experience making bills of quantities. - Be fluent in english. - Be available during a regular working schedule, from Monday to Friday, 8:00 am to 5:...

    €4 / hr (Avg Bid)
    Izpostavljeno
    €4 / hr Povprečna ponudba
    22 ponudb

    We would like to design and manufacture a picnic box for on the back of a ute/pickup truck. Would need to be able to be taken off and on easily. Will suggest ideas and do concept sketches as needed. Have got a model of the ute deck in IGS file, but its too big to upload.

    €247 (Avg Bid)
    €247 Povprečna ponudba
    39 ponudb
    Anydesk AutoCAD 5 dni left
    VERIFICIRAN/A

    Curso básico de AutoCAD 2D, con diseños espectaculares, y ejercicios prácticos para su mayor aprendizaje.

    €119 (Avg Bid)
    €119 Povprečna ponudba
    16 ponudb

    Project is related to Theory of Mechanics And Materials (Four Bar linked system ) , only Part 2 & 3 Required as in the file provided . Budget is Around 100 Euros

    €102 (Avg Bid)
    €102 Povprečna ponudba
    14 ponudb

    I would like for someone with Autodesk 360 or Solid-works experience to design a real life putter head (similar to Scotty Cameron, or replica) with a center of gravity calculation. I want to then take the necessary file and make a putter out of a block of 303 stainless steel.

    €92 (Avg Bid)
    €92 Povprečna ponudba
    23 ponudb

    Hello, We are looking for a design to hold tubes from 10mm diameter to 55mm diameter. Holder should have the option to manually select the diameter of the tube. Tubes will be pushed into the holder and should fit perfectly for each diameter as selected.

    €48 (Avg Bid)
    €48 Povprečna ponudba
    29 ponudb

    I need a drafter thats well versed with Autocad and possibly revit to prepare drawings based on mark ups. The plans would most likely be 3-5 pages worth of structural details.

    €16 / hr (Avg Bid)
    €16 / hr Povprečna ponudba
    62 ponudb
    Remake STL model from Existing STL 5 dni left
    VERIFICIRAN/A

    i have a STL model that was done but needs to be recreated so we can have parts of the model editable. We only have the original final STL so it needs to be remade so we can change things on model as it is not editable. We do not have any of the original files to make changes! so we need to make from scratch. Want new file in 3dmax or similar also would prefer someone with 3d printing experience!...

    €103 (Avg Bid)
    €103 Povprečna ponudba
    47 ponudb
    Steel Roof Structural Analysis 5 dni left
    VERIFICIRAN/A

    I need an existing Steel Roof frame unaliased for deflection and torque of the individual steel member and at the connection points using programs such as 'Autodesk - Advance Steel', Edilus Steel, RSTAB or Tekla Structural Designer I will provide a Sketchup model of the roof steel frame

    €146 (Avg Bid)
    €146 Povprečna ponudba
    32 ponudb
    Balcony Design 5 dni left
    VERIFICIRAN/A

    We are upgrading an existing Balcony platform for two Story building and we need a Revit modeler and detailer to update our revit files according to the new design. Please read scope: 1) Update existing revit design file to meet the new Balcony Design 2) provide Construction details and Construction drawings and if needed Drafting details and construction drawing using CAD. 3) This is a Civil C...

    €135 (Avg Bid)
    €135 Povprečna ponudba
    36 ponudb

    Remix Robotics is an automation design agency that builds custom robotic systems for companies including DHL, Mercedes F1& Small Robot Company. Remix requires the services of an industrial designer to produce semi-realistic renders of the attached product. This render will be used to demonstrate to the client what the product may look like. This render will not be used as sales or marketing ...

    €174 (Avg Bid)
    €174 Povprečna ponudba
    65 ponudb

    Detailed drawing for windows, door, stairs, planters, and interior decorations with dimension, material and specifications

    €807 (Avg Bid)
    €807 Povprečna ponudba
    76 ponudb

    Looking for someone who is proficient in using 2D Autocad and understands RL's/NGL's. The work will consist of drawing residential site plans with Garages, Awnings, carports. Drawing template will be supplied to the contractor along with site measurements. This will be consistent work with the capability of being 40+ hours a week for the correct contractor. Drawings have a maximum of...

    €16 / hr (Avg Bid)
    €16 / hr Povprečna ponudba
    57 ponudb

    Design of autommotive parts from plastic and metall alloys in Catia.

    €14 / hr (Avg Bid)
    €14 / hr Povprečna ponudba
    30 ponudb

    Theme: designing Panda Plush Toys. Style: Cute. Size: Medium(about 10-16 inches). Market Customer and market:American Children around 10 years old. Production type: Mass production. Other requirements: In order to ensure the product has a better visual effect, this position needs CAD skills, and it is best to have the same type of design experience. Must be original! Must be original! Must be ...

    €86 (Avg Bid)
    €86 Povprečna ponudba
    16 ponudb

    solidworks design sheet metal

    €9 / hr (Avg Bid)
    €9 / hr Povprečna ponudba
    61 ponudb

    I will need to convert engineering drawing made in paper through pensil to digital form in AutoCAD. There are total more than 1000 picture. And I will pay enough money in INR for each drawing finish. Some example of the drawing are attached here.

    €3592 (Avg Bid)
    €3592 Povprečna ponudba
    4 ponudb

    We need Freelancers who can made Building (Cold store) design/Layout on AutoCAD in 3D

    €78 (Avg Bid)
    €78 Povprečna ponudba
    14 ponudb

    Need to consolidate architectural drawing with MEP drawings

    €112 (Avg Bid)
    €112 Povprečna ponudba
    8 ponudb
    Plaxis 2D model 5 dni left
    VERIFICIRAN/A

    Want to make two modl on plaxis

    €97 (Avg Bid)
    €97 Povprečna ponudba
    8 ponudb
    Mechanical Research Writer 5 dni left
    VERIFICIRAN/A

    - Mechanical Research Writer - Ansys knowledge - Solidworks knowledge

    €120 (Avg Bid)
    €120 Povprečna ponudba
    21 ponudb
    Cad design for curved block 5 dni left
    VERIFICIRAN/A

    Design cad file for block with curve dimensions

    €265 (Avg Bid)
    €265 Povprečna ponudba
    73 ponudb

    I need someone to help me model in 3D a piece for CNC carving. The model should be exportable for 3-Axis CNC carving on MDF. The dimensions of the whole piece should be 21 inches width x 7 inches depth x 3 inches height. The geometry of the modeled texture can be stretched to fit the specified dimensions The model should be exported to a format compatible with Rhino.(step file)

    €7 - €17
    Zapečateno
    €7 - €17
    9 ponudb

    Hello, Our Client requires the services of a model for casting for a new on-line fashion [prijavite se za ogled URL] get back to me for more details.

    €361 (Avg Bid)
    €361 Povprečna ponudba
    16 ponudb

    Design extension to Garage - multiple story with mezzanine on existing single story Garage - 50 sqm extension Additional Extension to building of approx. 100sqm. Draft and visual drawing required. Current plans will be provided in PDF to use for putting into new CAD / or similar drawing. Visual / Architectural View of the complete project. (Room set out etc)

    €101 (Avg Bid)
    €101 Povprečna ponudba
    36 ponudb

    I am building a new home and one of the Council's requirements is for me to install a 10,000 ltr metal tank for access by Country Fire Authority (CFA). The Council is also asking me to ensure I install a suitable Concrete Slab on which the tank can be placed. To do this, I am looking for an engineer to design the concrete slab that I can submit to the Council to support my application.

    €77 (Avg Bid)
    €77 Povprečna ponudba
    19 ponudb
    I need a CAD dreaing 4 dni left
    VERIFICIRAN/A

    Potable Water System CAD DRAWING PLEASE

    €16 / hr (Avg Bid)
    €16 / hr Povprečna ponudba
    56 ponudb

    Need to get slab design size 3.5 x 2.3 raft slab have soil report. also need beam size on boundary side 100x100 galvanised posts for Truss roof (posts 3 of at 2.995 centers) hoping to use 145x 45 F17 Laminated same as Wall Plate on buildind side.

    €224 (Avg Bid)
    €224 Povprečna ponudba
    20 ponudb

    We are looking for an experienced and reliable designer/drafter to help us deliver detailed and accurate designs to our clients. Work on a multitude of projects with us 2020 Spaces and our cabinet catalog, you will create layouts, elevations, and renderings. We will provide a design packet with product selection, client measurements, and any notes of changes. The project will be reviewed by the de...

    €25 / hr (Avg Bid)
    €25 / hr Povprečna ponudba
    33 ponudb
    Potable Water Design 4 dni left
    VERIFICIRAN/A

    I would like the attached rough draft sketched with CAD

    €18 (Avg Bid)
    €18 Povprečna ponudba
    26 ponudb

    Bill of quantities for a construction project Civil electrical mechanical And architecture

    €125 (Avg Bid)
    €125 Povprečna ponudba
    30 ponudb

    Top CAD/CAM člankov Skupnosti