Getafreelancer cdmadela
a proposal for the structure of the network. • Two networks are envisaged: 1. A voice network based on CDMA (code division multiple access) technology. 2. A data network based on 4G-LTE technology. free to propose any frequency bands for the voice uplink and downlink and also for the 4G network.
two networks are envisaged: 1. a voice network based on CDMA( code division multiple acces)technology. 2. A data network based on 4G-LTE technology.
Prosimo, vpišite se ali se prijavite za več podrobnosti.
please read carefully before accept my job I have termination gateways work with CDMA network not GSM have issue that is when make call it run billing directly with calling before ringing or real connected this happen even i use my mobile for same network so is any one can fix by soft switch (Signal billing inside sip)
...traffic is not guaranteed especially over the core network. It is highly desirable to have end-to-end secure communications over the GSM voice channel. In order to achieve end-to-end security, speech must be encrypted before it enters the GSM network . Project requirements: No JB, Do not install APP, No Internet Connection Analog Voice Encryption Encrypting voice of mobile calls (GSM, CDMA, LTE, APP ... calls) directly. Encrypt voice contents before sending into cell phone. Prevent intercept at phone, base station and Telecom server site. Analog encryption guard against crack and hack. Secure your voice contents extremely. No APP Installation No Server involvement project doesn’t need internet connect...
Simulation of direct sequence CDMA using simulink transmitter and reciver and taking into account the MAI (multiple access interference) meaning what will happen if we increase number of users what effects would it have on MAI
Sip to native dialer app Features 1. this app need to be working in the background 2. the app file will have with all configuration user password to register to our sip server so client do not need to use user and password 3. the app register it self with a remote sip server 4. the result for this app will be , our remote server ...do not need to use user and password 3. the app register it self with a remote sip server 4. the result for this app will be , our remote server send a call to the app that reside on a phone , with the call we will send as well a phone number . The app will accept our call and dial out using native dialer on the phone, using local network gsm or ...
...gateway, to function as a cellular modem. This task is too small for our in-house SW devs to be concerned with as they are busy developing the main software platform which sends messages to the modem. Primary development platform is Digi TransPort WR41, I have one here I can send to you. Final implementation would be run on a TransPort device which supports global cellular frequencies including CDMA while it lasts in the US. Solution should also be applicable to other TransPort devices in the same family. Must interface with Vaisala viewLinc continuous monitoring software, alarm notifications and acknowledgements are sent using AT Hayes modem commands to a PC serial port. The modem must utilize those commands to send and receive SMS only, no voice, no data. AT command functio...
Hello. I have a minor project for anyone specializing in the WIRELESS TELECOM or TELECOM INDUSTRY. KNOWLEDGE OF CDMA, LTE, and GSM NETWORKS are neccissary. CDMA specifically. thank you
Hello. I have a minor project for anyone specializing in the WIRELESS TELECOM or TELECOM INDUSTRY. KNOWLEDGE OF CDMA, LTE, and GSM NETWORKS are neccissary. CDMA specifically. thank you
I need Software developer / engineer for develop software! All info in Messages. Software must have option for unlock cell phone as CDMA carrier.
This session involves establishing familiarity with a wideband means of modulation, Code Division Multiple Access (CDMA). Numerical processing tools are utilised to explore the physical layer signalling associated with CDMA. This session will be done in MATLAB. I'm looking for MATLAB code and explanation with each step to be followed by notes provided.
Sip to native dialer app Features 1. this app need to be working in the background 2. the app file will have with all configuration user password to register to our sip server so client do not need to use user and password 3. the app register it self with a remote sip server 4. the result for this app will be , our remote server send a ...do not need to use user and password 3. the app register it self with a remote sip server 4. the result for this app will be , our remote server send a call to the app that reside on a phone , with the call we will send as well a phone number . The app will accept our call and dial out using native dialer on the phone, using local network gsm or ...
MATLAB SIMULATION FOR MIMO FULL MIMO 3D CHANNEL 5G-NOMA MMWAVE BEAMFORMING GNSS CDMA SPATIAL MODULATION
facebook instant articles example, facebook instant articles ads, facebook instant articles revenue, facebook instant articles tutorial, facebook instant articles rss, how to use facebook instant articles, facebook instant articles wordpress, facebook instant articles format, want blog getafreelancer, blog news writers, want set news website, want imeem playlist wordpress blog, codes facebook instant messaging, facebook instant messaging script, facebook skin dotnetnuke connect
I'm in need of an expert in VoIP and Asterisk to fix the FAS problem which usually occurs when using a CDMA Gateway. Please, only bid if you fully understand this problem and have a solution to proposed.
I need an iPhone/iPad app. I would like it designed and built. Here is a scenario: Person buys a drone (online/abroad) Opens our App Registers his UAV (all details including ADHAAR) Uploads police clearance from local Office Gets added to our database of listings This data can be made available to DGCA or any ANS provider Find Drone Piolots: Using GPS location a list of active Drone flyers can be made available on a Map The map will be interactive and will highlight No-fly zones, Safe Flying zones etc. Since it will be real time data, ATC, DGCA, ANS providers and local authority can keep a track of all registered UAV in our Indian Air Space. Showcasing work: Drone piolot or Aeriel cinematogrphers can upload their content and make it availabe for viewers to comment. Quick sha...
...GSM voice traffic is not guaranteed especially over the core network. It is highly desirable to have end-to-end secure communications over the GSM voice channel. In order to achieve end-to-end security, speech must be encrypted before it enters the GSM network . Project requirements: No JB, Do not install APP, No Internet Connection Analog Voice Encryption Encrypting voice of mobile calls (GSM, CDMA, LTE, APP ... calls) directly. Encrypt voice contents before sending into cell phone. Prevent intercept at phone, base station and Telecom server site. Analog encryption guard against crack and hack. Secure your voice contents extremely. No APP Installation No Server involvement project doesn’t need internet connection. project communicate through voice channel. Won’t ...
We need a non-gui app that operates in two modes a) Continuous mode b) Remotely controlled mode The app should do the following in either of the above modes 1. Record phone screen continuously 2. Record all calls (both GSM/CDMA and VoIP, Whatsapp etc.) 3. Send locations 4. Record mic 5. Record cameras We know this can not probably be done through stock android ROMs so we have an option to do the same from a custom ROM. All the files that the app generates should be uploaded to Amazon S3 bucket (access will be provided). A short interview might be conducted before hiring for the job.
...min. You do not need to reinstall the app. More details will be provided before testing. Feel free to ask additional questions if needed. Dialing codes list for reference Mobile service providers can be identified by the first three or four digits as follows: 130/1/2 China Unicom GSM 133 China Telecom1 CDMA 135/6/7/8/9 China Mobile GSM 145 China Unicom WCDMA (formerly Data-plans only) 147 China Mobile TD-SCDMA (formerly Data-plans only) 150/1/2/8/9 China Mobile GSM 153 China Telecom1 CDMA 155 China Unicom GSM 156 China Unicom GSM (upgradeable to WCDMA) 157 China Mobile TD-SCDMA 166 China Unicom FDD-LTE/TD-LTE 171 China Unicom2 WCDMA/GSM 173/7 China Telecom FDD-LTE/TD-LTE 176 China Unicom FDD-LTE/TD-LTE 178 China Mobile TD-LTE 180/1 China Telecom CDMA2000 182/3/4/7 China ...
...do not need to reinstall the app. More details will be provided before testing. Feel free to ask additional questions if needed. Dialing codes list for reference Mobile service providers can be identified by the first three or four digits as follows: 130/1/2 China Unicom GSM 133 China Telecom1 CDMA 135/6/7/8/9 China Mobile GSM 145 China Unicom WCDMA (formerly Data-plans only) 147 China Mobile TD-SCDMA (formerly Data-plans only) 150/1/2/8/9 China Mobile GSM 153 China Telecom1 CDMA 155 China Unicom GSM 156 China Unicom GSM (upgradeable to WCDMA) 157 China Mobile TD-SCDMA 166 China Unicom FDD-LTE/TD-LTE 171 China Unicom2 WCDMA/GSM 173/7 China Telecom FDD-LTE/TD-LTE 176 China Unicom FDD-LTE/TD-LTE 178 China Mobile TD-LTE 180/1 China Telecom CDMA2000 18...
This is a duplicate of a project I saw on GetaFreelancer. I would like the same thing. I'm looking for a WordPress plug-in (ideal!) or PHP script that will take the 1003 form data like: on the front end of the script, and it to save data to a database on the server in Fannie Mae Version 3.2 format but also email me the data in that format after the loan application is completed. The front end would require the user to create a quick username and password so the person can save their progress during the application process because most people will not be ablt to complete the entire form in one visit, so progress must be saved. I would also need an admin section where we can add/remove/edit/export the loan app
We are looking for solution like a traditional GSM or CDMA VoiP gateway. This project will be separated in two parts. One is mobile application and another one is registration server. The Mobile application will register to a server and accept call from that server with IXA or SIP protocol. After that call will terminate to a GSM network. (this part just like a traditional GMS getaway) This mobile application will work on only wifi Internet connectivity, coz GSM internet data normally disable during any GSM call. All call will pass with G729 codec The registration server may be Asterisk or VOIP switch or any other server or customize server. This server will receive call from another VOIP switch server with SIP protocol. Certain number of registered Mobile will be able to ass...
We are looking for the person specialized in GSM CDMA LTE mobile enhancers / boosters. The perfect candidate working background should be in Mobile Providers company or related field which has ever dealt with antennas and signal boosters. The job is for customer support for signal boosters users by helping them to install product and make it work correctly. Only bidders who have relevant experience will be reviewed. You will be examined before hiring.
Due to slow acoustic propagation of acoustic waves the data rates in underwater acoustic communications that can be archived is relatively very low compared to RF channels in the air. In this work we will study through matlab simulations first then experimentally the performance of uniquely decodable ternary code sets for highly overloaded synchronous Code-Division Multiple Access(CDMA) systems in underwater acoustic scenarios. The underlying main challenge is to design and experiment advanced receivers that could potentially mitigate the high multipath and Doppler effect present in the underwater acoustic channels.
Due to the slow acoustic propagation of acoustic waves the data rates in underwater acoustic communications can be achieved is relatively very low compared to RF channels in the air. In this work we will study through Matlab simulations first and then experimentally the performance of uniquely decodable ternary code sets that can provide many more users then the conventional CDMA ternary codes sets. The main challenge of this project is to design and experiment advanced receivers that could potentially mitigate the high multipath and Doppler effect present in the underwater acoustic channels.
Here in "NRApay" you can recharge your prepaid mobile online, do DTH recharge, Pay Utility Bills, do Online Money Transfer. Its One stop solution for all financial services.. Prepaid Recharge for all major India's top cellular services is available here. Apart from GSM phone recharge, Online recharge is also available for CDMA prepaid cellphones. The payments can be made through all major credit cards or bank transfers.
The Freelancer must be a native Spanish speaker from Latin America, and must know WordPress. Here is the article to be translated from English to Spanish:
I bought a used SAMSUNG Galaxy Tab S 10.5 LTE US CDMA SPRINT tablet (SM-T807P). This device works in CDMA networks but I need it to work in GSM networks (GMS / HSDPA / LTE). I'm outside US. I have the MSL code and the device is already rooted (CF-Auto-Root), unlocked and debranded (idoneapps app). In addition with a custom recovery flashed (TWRP). After a few weeks of trying different configurations (ServiceMode), programs (CDMA Tools, Qualcomm Tools, DFS, etc) and patches (editing the , etc) all, basically, taken from the XDA site, I'm still not getting connection to any (2G/3G/4G) of my 3 local carrires. I have achieved that the 3 GSM SIM are being accepted (no more "Invalid SIM" message and I can see the network status icon: without signal) ...
I need few answers for topic.I am basically network engineer, shifting to Telecom Engineer.I need few detailed ans for below question. I have few questions if anyone can provide me detailed ans from Basic stuff, since i am new for this technology.I have interview ,so need to prepare for those answer. ...need few answers for topic.I am basically network engineer, shifting to Telecom Engineer.I need few detailed ans for below question. I have few questions if anyone can provide me detailed ans from Basic stuff, since i am new for this technology.I have interview ,so need to prepare for those answer. 1- Manager baghto bolla 2- Lte cdma 3-Handover reselections 4-Sip call flow 5-Earfcn downlink 6- Lte master information block 7- Types of registration in cdma 8-Track...
...network problems and other related IT problems. WeCare often looks to experts for assistance. WeCare has recently hired you to help on a new project. Assume that you are requested to design a Medium Access Control protocol for a set of low power wireless (mobile) nodes that have to communicate with a wireless access point. Your constraints are: 1. You can only use FDMA and TDMA like schemes (CDMA is not considered for cost and complexity reasons). 2. The nodes clocks can drift in time by some maximum known value. 3. Nodes can have three modes: Transmit, Listening/Receiving, Sleep. While transmitting nodes consume twice in comparison to when they are receiving. In sleep mode nodes consume 1% power in comparison with transmit mode. Only the mobile nodes are power limite...
...S/LTE), Current cell identity (CID), • Current area identity (LAC/RNC/TAC), • Signal strength (RSSI and RSRP for LTE networks) - Displays low level cellular network information data along with frequency band calculations. - Reads cellular frequencies - Displays a map of both coverage and individual tower sector coverage and bands - Frequency calculator (GSM ARFCN, UMTS UARFCN, LTE EARFCN, CDMA, and iDEN) - On Register time info need (1 time job collect ) Mobile Phone Information, Phone Type, IMEI Number, - Manufacturer Details, Model number, SIM Serial Number, SIM State, Phone Number - Map with network cellular info - Record measurements in logfiles (csv and kml format) - Cell file import/export and sites and serving and neighbor cells lines visualization o...
design and simulation in MATLAB typed 2-4 pages proposal of the topic you select. The proposal should include: i. An introduction. ii. Research Plan. iii. Conclusion. iv. References. Performance Evaluation and Comparison of WiMAX and LTE. • Performance Analysis for uplink/downlink MC-CDMA Communication Systems in Rayleigh Fading. • Design and Implementation of Bluetooth Energy Meter. • PAPR reduction in OFDM Communication Systems. • Energy Efficient Algorithms for Networks Communication. • Decoding Method for non-binary TCM Codes. • Bluetooth and Wi-Fi Wireless Protocols. • Cognitive Radio Networks. • The use of Smart Antenna in Wireless Communication. • Wireless Sensor Networks. • Channel Fading in Communic...
...take this offline mode so if u ready let me know typed 2-4 pages proposal of the topic you select. The proposal should include: i. An introduction. ii. Research Plan. iii. Conclusion. iv. References. any one of the topic of your choice from these listed below • Performance Evaluation and Comparison of WiMAX and LTE. • Performance Analysis for uplink/downlink MC-CDMA Communication Systems in Rayleigh Fading. • Design and Implementation of Bluetooth Energy Meter. • PAPR reduction in OFDM Communication Systems. • Energy Efficient Algorithms for Networks Communication. • Decoding Method for non-binary TCM Codes. • Bluetooth and Wi-Fi Wireless Protocols. • Cognitive Radio Networks. • The us...
...secon i want to take this offline mode so if u ready let me know typed 2-4 pages proposal of the topic you select. The proposal should include: i. An introduction. ii. Research Plan. iii. Conclusion. iv. References. any one of the topic of your choice from these listed below • Performance Evaluation and Comparison of WiMAX and LTE. • Performance Analysis for uplink/downlink MC-CDMA Communication Systems in Rayleigh Fading. • Design and Implementation of Bluetooth Energy Meter. • PAPR reduction in OFDM Communication Systems. • Energy Efficient Algorithms for Networks Communication. • Decoding Method for non-binary TCM Codes. • Bluetooth and Wi-Fi Wireless Protocols. • Cognitive Radio Networks. • The use ...
No JB, Do not install APP, No Internet Connection Analog Voice Encryption Encrypting voice of mobile calls (GSM, CDMA, LTE, APP ... calls) directly. Encrypt voice contents before sending into cell phone. Prevent intercept at phone, base station and Telecom server site. Analog encryption guard against crack and hack. Secure your voice contents extremely. No APP Installation No Server involvement project doesn’t need internet connection. project communicate through voice channel. Won’t save or transfer log/key by 3rd party. Less exposure and higher security. Provide unlimited encrypted phone call minutes. No licenese limitation. Secure phone call forever. The phone is used to send encrypted voice between the parties. The piece contains two parts Part of th...
No JB, Do not install APP, No Internet Connection Analog Voice Encryption Encrypting voice of mobile calls (GSM, CDMA, LTE, APP ... calls) directly. Encrypt voice contents before sending into cell phone. Prevent intercept at phone, base station and Telecom server site. Analog encryption guard against crack and hack. Secure your voice contents extremely. No APP Installation No Server involvement project doesn’t need internet connection. project communicate through voice channel. Won’t save or transfer log/key by 3rd party. Less exposure and higher security. Provide unlimited encrypted phone call minutes. No licenese limitation. Secure phone call forever. This video is only to explain and understand the idea well Working Conditions: The project
No JB, Do not install APP, No Internet Connection Analog Voice Encryption Encrypting voice of mobile calls (GSM, CDMA, LTE, APP ... calls) directly. Encrypt voice contents before sending into cell phone. Prevent intercept at phone, base station and Telecom server site. Analog encryption guard against crack and hack. Secure your voice contents extremely. No APP Installation No Server involvement project doesn’t need internet connection. project communicate through voice channel. Won’t save or transfer log/key by 3rd party. Less exposure and higher security. Provide unlimited encrypted phone call minutes. No licenese limitation. Secure phone call forever. This video is only to explain and understand the idea well Working Conditions: The project
No JB, Do not install APP, No Internet Connection Analog Voice Encryption Encrypting voice of mobile calls (GSM, CDMA, LTE, APP ... calls) directly. Encrypt voice contents before sending into cell phone. Prevent intercept at phone, base station and Telecom server site. Analog encryption guard against crack and hack. Secure your voice contents extremely. No APP Installation No Server involvement project doesn’t need internet connection. project communicate through voice channel. Won’t save or transfer log/key by 3rd party. Less exposure and higher security. Provide unlimited encrypted phone call minutes. No licenese limitation. Secure phone call forever. This video is only to explain and understand the idea well Working Conditions: The project
This is a duplicate of a project I saw on GetaFreelancer. I would like the same thing. Brian I'm looking for a WordPress plug-in (ideal!) or PHP script that will take the 1003 form data like: on the front end of the script, and it to save data to a database on the server in Fannie Mae Version 3.2 format but also email me the data in that format after the loan application is completed. The front end would require the user to create a quick username and password so the person can save their progress during the application process because most people will not be ablt to complete the entire form in one visit, so progress must be saved. I would also need an admin section where we can add/remove/edit/export the loan app and/or
i need create a asterisk for make call from cdma usb modem
We are looking for solution like a traditional GSM or CDMA VoiP gateway. This project will be separated in two parts. One is mobile application and another one is registration server. The Mobile application will register to a server and accept call from that server with IXA or SIP protocol. After that call will terminate to a GSM network. (this part just like a traditional GMS getaway) This mobile application will work on only wifi Internet connectivity, coz GSM internet data normally disable during any GSM call. All call will pass with G729 codec The registration server may be Asterisk or VOIP switch or any other server or customize server. This server will receive call from another VOIP switch server with SIP protocol. Certain number of registered Mobile will be able to assign ...
No JB, Do not install APP, No Internet Connection Analog Voice Encryption Encrypting voice of mobile calls (GSM, CDMA, LTE, APP ... calls) directly. Encrypt voice contents before sending into cell phone. Prevent intercept at phone, base station and Telecom server site. Analog encryption guard against crack and hack. Secure your voice contents extremely. No APP Installation No Server involvement project doesn’t need internet connection. project communicate through voice channel. Won’t save or transfer log/key by 3rd party. Less exposure and higher security. Provide unlimited encrypted phone call minutes. No licenese limitation. Secure phone call forever.
...Desired Candidate Profile Education: UG - /B.E. - Electronics/Telecommunication, Information Technology, Computer Science,Electronic & Instrumentation,Electrical. • Industry Type: Telecom /ISP Functional Area Candidate will get an opportunity to work on the following designations: 1. RF Engineer (Survey, Planning, optimization) 2. Drive-Test Engineer 3. O&M Engineer 4. GSM Engineer 5. CDMA Engineer...
...HDBot acts as a gateway between our API and Slack. Our API is documented here : HDBot must support at least these commands : vendors - lists all vendors (as links ? is this possible ? eg. @hdbot vendors) models - lists all models for a vendor (eg @hdbot models nokia) whathas - lists all devices that have a specific property (eg @hdbot whathas CDMA) view - lists all information about a device or lists models if its a device alias (eg @hdbot view nokia n95) detect - looks up a device from a user-agent or device build information(eg @hdbot detect "Mozilla/5.0 (SymbianOS/9.2; U; Series60/3.1 NokiaN95/10.0.018; Profile/MIDP-2.0 Configuration/CLDC-1.1) AppleWebKit/413 (KHTML, like Gecko) Safari/413 ") version - shows
please read carefully before accept my job i have termination gateways work with CDMA network not gsm have issue that is when make call it run billing directly with calling before ringing or real connected this happen even i use my mobile for same network so is any one can fix by soft switch (Signal billing inside sip)
1. SOFTWARE: • C, C++ programming of custom and COTS embedded systems using GNU, IAR, Atmel, Rabbit, Renesas, Hi-Tech, and GreenHil...8051, i960, DSP56K, Z80 and 68HC11 CPUs. • Scripting using Python, Ruby and Bash. 2. Hardware: • Interfacing to COTS and custom designed hardware, including high-speed digital, serial, DSPs, FPGAs & CPLDs. • Industrial communications, e.g. RS-232, RS-485, ZigBee, CAN etc. • Failure diagnosis & debugging to component level. 3. Protocols: • HTTP, HTTPS, TCP, UDP, Thread, MQTT, SNMP, PPP, NMEA, CDMA, Web Sockets, PLC, UBlox, CANOpen, custom. 4. Interfaces: • RS232, RS485, ZigBee, SPI, CAN, Ethernet, PLC, IC, ISM RF, Wifi, Bluetooth Low Energy. 5. Operating Systems: • Linux, Android, uCLinux, Dou...
We are looking for solution like a traditional GSM or CDMA VoiP gateway. This project will be separated in two parts. One is mobile application and another one is registration server. The Mobile application will register to a server and accept call from that server with IXA or SIP protocol. After that call will terminate to a GSM network. (this part just like a traditional GMS getaway) This mobile application will work on wifi Internet connectivity and mobile Data internet , All call will pass with G729 codec The registration server may be Asterisk or VOIP switch or any other server or customize server. This server will receive call from another VOIP switch server with SIP protocol. Certain number of registered Mobile will be able to assign in a group of gateway. On server ...
We are looking for solution like a traditional GSM or CDMA VoiP gateway. This project will be separated in two parts. One is mobile application and another one is registration server. The Mobile application will register to a server and accept call from that server with IXA or SIP protocol. After that call will terminate to a GSM network. (this part just like a traditional GMS getaway) This mobile application will work on wifi Internet connectivity and mobile Data internet , All call will pass with G729 codec The registration server may be Asterisk or VOIP switch or any other server or customize server. This server will receive call from another VOIP switch server with SIP protocol. Certain number of registered Mobile will be able to assign in a group of gateway. On server ...
We are looking for solution like a traditional GSM or CDMA VoiP gateway. This project will be separated in two parts. One is mobile application and another one is registration server. The Mobile application will register to a server and accept call from that server with IXA or SIP protocol. After that call will terminate to a GSM network. (this part just like a traditional GMS getaway) This mobile application will work on only wifi Internet connectivity, coz GSM internet data normally disable during any GSM call. All call will pass with G729 codec The registration server may be Asterisk or VOIP switch or any other server or customize server. This server will receive call from another VOIP switch server with SIP protocol. Certain number of registered Mobile will be able to ass...
