Webdav fileserverdela

...and MySQL database setup, potentially revisiting our syncthing setup Full detail: We have a load balancer, two webservers, and a database server running mysql in our environment. We have wordpress website that runs on this setup. We've had the two webservers keeping files in sync using syncthing. However, on the recommendation of an experienced engineer we converted one of our webservers to a fileserver - because the sync setup was creating errors. Now we have the load balancer,two webservers, a file server (cloned from one of the webserver), and the database server. We now need to configure the environment for Wordpress to work with this architecture. We need an engineer that can change the overall design to meet the new configuration and get the site up and running. Thor...

Im trying to use WebDav in centos and nginx but im having problems. Im looking for somebody that have experiencie in webdav and nginx thanks you !

We are seeking a skilled freelancer to assist with troubleshooting and correcting a remote storage connectivity issue in an OwnCloud installation. The OwnCloud application is currently connected to a primary shared storage via WebDav, and while the server establishes a connection to the storage without issues, there is an apparent discrepancy in file visibility between the desktop application and the OwnCloud web interface. Issue Summary: Adding items to remote storage via the desktop application results in a conflicting status message (both failed and succeeded). Files added to remote storage are not visible within the OwnCloud web interface, although they are present when directly checking the remote storage. Project Scope: Diagnosis: Analyze the existing OwnCloud configuratio...

I am in need of a freelancer to set up a fileserver for me. The details of the project are as follows: Operating System: - The fileserver will be using the Windows operating system. Intended Use: - The main purpose of the fileserver will be for file sharing. Number of Users: - The fileserver will need to accommodate 1-10 users. Skills and Experience: - Experience in setting up and configuring file servers on the Windows operating system. - Knowledge of file sharing protocols and best practices. - Ability to troubleshoot any potential issues that may arise during the setup process. - Strong communication skills to ensure a smooth collaboration with the client. If you have the necessary skills and experience, please submit your proposal for this project. T...

I am looking for a freelancer to create a low-cost fileserver for my business. Here are the details: Operating System: - I prefer Windows for the fileserver. Storage Capacity: - I require less than 1TB of storage capacity for the fileserver. Specific Features: - I need data backup/recovery functionality for the fileserver. Ideal Skills and Experience: - Experience in setting up file servers with Windows operating system. - Knowledge of storage solutions for small businesses. - Proficiency in data backup and recovery processes. Please provide your proposal with a breakdown of costs and estimated timeframes for completing the project.

I manage several groups on telegram. I want to post on an daily base content on each of those groups, each group has different content. Now, I'm looking for a certain script or tool that can post this content to the correct group. I was looking to do it like this : - on my fileserver I have folders that correspond to the group names or the group ip - in these folders I have subfolders that have a data as name for example 09-09-2023, 10-09-2023, 11-09-2023, ... - the content in these date folders is what needs to be posted in that group on that day This means I can plan ahead, and be sure that every day the new content is added. This needs to run on a windows machine. If you have other ideas feel free :)

..."nxncopen". Only one Domain needs to be supported per installation. You can integrate multi-simultaneous support if you like - forced Auto-Update directly from gitlab-releases - builtin "open-with" this tool from browser when it wants "xdg-open" -> "nxncopen" (Serverside already exists) - authentication-authoization needs to be automatically requested once it starts the first time to connect a webdav-share - there needs to be a little message popping up in system messages on the client system, telling the user the filename which is being opened the users files-folder of his Nextcloud needs to be mounted On Windows it should be mounted on N: - The files opened from there need to be trusted automatically but only for the domain used - It n...

I need condig IIS in a windows server for WebDav. I need that you do it by TeamViewer or AnyDesk for I see how you do it. thanks you !

We are going to launch a service called, Backup Solution. In this service we will give some premium features. Those are given below. 1. Online File Sharing 2. File History Recovery 3. Multiple Concurrent Sessions 4. Public File Expiration 5. Public File Password 6. Remote File Transfer 7. Rsync 8. WebDAV Online File Sharing: With remote employees and people always on the move, our online collaboration allows your team to stay connected! Users can store, manage, edit and share their content all within their ADrive workspace. User can share file with each other. File History Recovery: Have you ever saved over an original file and wished you could retrieve that file? With our file history feature, you can view previous versions of your files utilizing snapshot technology. Every ...

Overview: Show PDF, JPEG and PNG files from a server, grouped by day Design concept: Functionality: - Screen 1: User types provided name and password. Load files through WebDAV for that user (details below). Go to Screen 3 on success. On failure, show an error message "Invalid Login". . "Kein Zugangscode" -> popup (Screen 2) . Button next to "Sanascreen": Link to - Screen 3: Calendar view with documents per day. In WebDAV folder, there are folders named after the date, e.g. "2023_03_28". Show all the documents for the given day in a list, with a small icon indicating the document type (details below). When the user taps a document, show it full-screen => Screens 5 and 6 (depending on device orientation)

I need help doing my NetApplications Lab. The Deadline is tomorrow - so I need someone to helps me today and tomorrow. Configurations: DHCP, DNS, Webserver Access from outside, virtual hosts, MTA, MDA, firewall, Fileserver, sockets and monitoring. If you are interested I can send you all the lab information - we will have to do it together.

Task 1: Set up WebDAV on 2 computers (Non local) Task 2: Set up a Two way hybrid backup sync so both NAS are backed up. (2 NAS are identical in 2 separate locations)

I need a small PHP Script on my Webspace with PHP 8.1 and Apache 2.4 Job of the Script - Connect to the Webdav Server - Connect to the MYSQL Server - Sync the Data from MYSQL (one Way) to the Webdav Server (add, delete, update) - Close the connection In thy mysql database are the filds firstname, lastname, company, phone, mobile,. i do not use composer on the webspace.

I need a small PHP Script wo I will run by Crontab on a Debian 10 System with PHP 8.1 and Apache 2.4 Job of the Script - Connect to the Webdav Server - Connect to the MYSQL Server - Sync the Data from MYSQL (one Way) to the Webdav Server (add, delete, update) - Close the connection In thy mysql database are the filds firstname, lastname, company, phone, mobile,.

Linux Ubuntu server lts 20.04 in Vadodara Gujarat. Installation of webserver and nextcloud, webdav (to map drive). Person from Vadodara prefered.

I have a practical exam on this Friday and need help studying Configurations: DHCP, DNS, Webserver Access from outside, virtual hosts, MTA, MDA, firewall, Fileserver, sockets and monitoring

Hallo Eduard K., ik kwam je profiel tegen en vroeg me af of je ervaring hebt met PHP icm WEBDAV/CALDAV. Dank voor je reactie alvast. Groet, Derek

Hallo Tobias, Ik kwam je profiel tegen en was benieuwd of je ervaring hebt met PHP icm WEBDAV/CALDAV. Ik hoor het wel. Groet, Derek

...raspberry-pi-3-updated-2021/ I have a Raspberry Pi 4. What I want delivered is exactly in the tutorial but as a img file or iso that I can write to an SD card and boot. Finished project would be this: Raspbian OS running an opensource Thinkst Canary (no errors - I get the same error as the comments section). SSH enabled (on random port). MAC address / mods in tutorial done - localhost name "FILESERVER". Default creds: pi / raspberry. Pi mimic'ing Synology - same as tutorial. Everything auto load / auto start on boot - turnkey, I just adjust the settings for the email alerts to my own creds via SSH. tll;dr: I can't get it to run on Raspbian (without errors) I can get it to work on other Linux distros, but I need this specific distro because it works best with...

Review iLo4 to ensure all firmware is updated for 6 physical servers. Configure to ensure that alerts are issued through iLo. Set up federation. Separately need to configure ADs form Replication and trust relationship AND fix errors in event logs. Also need to configure Exchange fo...Separately need to configure ADs form Replication and trust relationship AND fix errors in event logs. Also need to configure Exchange for Replication and Witness Server high availability in 2 sites. Backups and Replication to be done. Many admin functions to perform. Some minor some not. Need to decommission ADRMS and implemnet Sharepoint/Teams for FileServer and emails. Need to consolidate ADs (have one for Exchange and one for FileServer ADRMS etc). Need to combine to only have 1 domai...

Client project requires the candidate with mandatory experience in Web-Dav (min 4+ years) including relevant experience below:: • C#, • WPF(Mandatory), • .net programming language (server and client), • MS-SQL server, • SQL-Database knowhow, • Reactive programming for GUI-Development in the client, • IIS-server handling, • Visual Studio, • TeamCity for deployments, • Git-Lab • Share point interfaces simultaneously work on document planned for the future collaboration (without Check-out, Check-in procedure) via Web-DAV or extended WEB-DAV-protocol, Full-text index for the documents based on Lucene / ElasticSearch Interested candidate can share CV to mail address 'Shrrishan. Tamhan '

Hi looking for bigcommerce expert who has done work with webdav thanks only expert please

Hi , Want to quickly connect with candidates open for Contract Work (4 months) for DotNet WPF/ WebDav Developer Role with relevant experience in: • C#, Web-DAV • WPF(Mandatory), • .net programming language (server and client), • MS-SQL server, • SQL-Database knowhow, • Reactive programming for GUI-Development in the client, • IIS-server handling, • Visual Studio, • TeamCity for deployments, • Git-Lab • Share point interfaces simultaneously work on document planned for the future collaboration (without Check-out, Check-in procedure) via Web-DAV or extended WEB-DAV-protocol, Full-text index for the documents based on Lucene / ElasticSearch Further contract work will be executed remotely.

I want WebDAV to be set up remotely on my Qnap NAS. I need 3 computers set up with WebDAV (NAS is not on local network.

...keep version controlling the files with Git on my Mac. There is no need that the version controlling can be triggered from the iPad or iPhone. Org mode features which I use: - Regular outline with notes per outline entry - Keywords (TODO, DONE, ...) - Task scheduling - Lists of items within the notes - Tables - Agenda view Sync backend options which I consider viable: - Google Drive - iCloud - WebDAV or similar, we have a Synology NAS in our network which I believe does provide this. Expected result: - One proposed setup which is considered the best fit based on the research and experiments. This should be a brief description with pointers to the relevant sources. 1/2 page description in prose why this is the best setup. - List of alternative setups, their strong and weak po...

We need a Powershell Script that makes a file synchronization between a local network share and a remote ftps share. example local network share: fileserverinternal_documents example folder strucute on the network share: internal_documentsProductA --internal_documentsProductA --internal_documentsProductA --internal_documentsProductA internal_documentsProductB --internal_documentsProductB --internal_documentsProductB internal_documentsProductC --internal_documentsProductC remote ftp server path: /public/files The Variable-Parameters (network share, remote path, remote server ip, username, password) should be in a config-ini-file. Addition requirements: 1. connect to the server and get a folder & filelist then check if a folder or file

Agency or Recruiter, Poor developers who knows only 'Hello World', don't bid on this job. I am looking for an experienced C++ developer, who is able to d...or Recruiter, Poor developers who knows only 'Hello World', don't bid on this job. I am looking for an experienced C++ developer, who is able to develop a robust program in C++. This job involves 1. programming WebDAV server on HTTPS, not required a third-party libraries except for XML parsing and SSL/TLS library. 2. creating a filesystem in user space, which mounts the WebDAV on Finder and handle file operations (Read/Write/Create/List/Remove) KFS () would be the good solution for this job but it uses NFS3. So the job is to replace NFS3 with WebDAV over HTTPS. Please apply this jo...

Have ONSITE AD...files excluding PDF. Now when I log in to the FileServer and try to open an encrypted document - says "The logged in user could not be authenticated. Please check your credentials or try signing out and then signing back in." When I use CMD as administrator, and try to decrypt says ".... Failed, RMS client was not initiazed properly for the user ...." You need to be expert with ADRMS. FileServer must initialise to the AD RMS to allow access to all files I need to be able to access all files on the FileServer and then to decommission the AD RMS. When I go to RMS SP2 Administration Toolkit says it cannot connect to SQL. So if you are familiar with how to run the RMS SP@ Administrator Toolkit and can make the connection to and f...

I have the following projects that need to be upgraded to the latest version: 3 Angular projects used as frontend GUI with the following version: 8.1.3 (2X) 9.0.7 (1X) 4 Laravel proje...api) 6.20.44 (used as backend api) 6.13.1 (used as backend api) 5.5.28 (frontend+backend) The applications are part of a web site that includes CodeIgniter 3 projects, all host under the same vhost. Ideally I would like to have all applications running on PHP 8. Development environment: Windows 10 (no dev tools installed. please let me know what tools you need) Server: Ubuntu 20 (ssh, webdav) Access: AnyDesk When reply: - provide a very brief explanation on how the projects are to be upgraded. Need not be complete, key important steps will do. - please include dev tools tha...

HTML page, needs to retrieve data from a file on the fileserver called and place into the html section

I would like to access my NAS drive from a remote PC but not using TNAS software but rather i would like to open it just as if it was a local folder on my desktop and drag and drop as needed.

PLEASE READ BEFORE YOU RESPOND: I am shooting bunch of short films for a YouTube channel that I am creating. These videos will touch on d...server.. Each video will have an agreed length in minutes, currently estimated at an averageof 15mins, hence payment will be based on a per minute rate. We will start with between 4 to 6 engagements per month but this will rapidly grow to an average of about 10 within the first 4 months. A sample is here for your review: 1. Please click here: 2. User ID is webdav and password is ed!t0r 3. Arrange the files in COMO in ascending order of time. The Video is to be titled COMO Beach - Australia Little Towns 4. I want them joined together, with a music from the public commons to present a travelogue about Como Beach

is a new cloud offer and we are preparing our market entry. To test the functionality a software tester is needed. - errors are reported into the whmcs ticketing system - if the developers solved the issue, the ticked is closed Currently we are offering tree services: - fileserver - workgroup server - domain registration The tests include the (German) web GUI and the complete functionally of our cloud. All reports and the whole conversations are in English language. You can find us here: Our company group is:

We use AD RMS for our FileServer. Trying to open files on the network comes up with an error saying "The logged in users could not be authenticated. Please check your credentials or try signing out and signing back in." Doesnt matter as to which user. Also checked AD and AD RMS. Errors evidence that: - authentication is not enable on one of the required entry points (Event ID 208) - specific settings do not grant Local Activation permission (Event ID 10016) - user device registration failed (Event ID 307) also tried the RMSBulk tool but cannot decrypt as RMS client not initialised properly. So does ANYONE know how to resolve authentication or decrypt files???? I have the superuser access details. Thanks

We have created a storage system with PHP but I need Webdav protocol created to help my customer access the folders on his computer without going to the browser.

i need Help with setting up webdav on my synology-nas. I have setup up but its not allow me to map the drive still.

I want the below XML files to be edited to this format and specifications. #Tanzania #UnitedArabEmirates #UnitedKingdom https://...com/builtforjobs/ #India #Indonesia #Australia #Russia #Singapore

Synchronize calendars between multiple devices (outlook, android, iOS) Allow calendars users share between users (past and future) On outlook, be able to -- manage shared calendars (assistant be able to schedule meeting/appointment for me or other persons with pr...calendar (previous shared) participants on scheduling an appointment On android, be able to see synchronized calendar on outlook mobile On IOS, be able to see synchronized calendar actual email protocol: IMAP (no exchange) Accept two types of solutions -- third party software (free or paid) with integration - you will be paid for configuring it but all costs must be clear -- free solution with webdav/caldav or similar configuration using a vps/owncloud or similar files depot. Criteria: best price on proved working ...

...tasks, chat, notes, files and info panels about company sectors, that woulbe visible or not to users under role/user policies. (react, bootstrap or similar) Must have: - Authentication (login, user management, roles and permissions) - Panels/dashboard visibility/access under roles/users policicies panel configuration - integrated tools: -- email (we use imap) -- calendar, tasks (need config webdav or similar) -- chat (you could propose) If you are going to share any example project, be sure to share one on this scope and not any website. Example: Complete install and configuration Accept third party paid solutions integrated into bootstrap template too. Example with basic functions:

We need to move a site from Plesk Onyx to Plesk Obsidian. The preparation step throws some Apache modules than need to be i... alias, authn_alias, authn_default, authn_file, authnz_ldap, authz_default, authz_host, authz_user, autoindex, bw, cgi, cloudflare, dir, disk_cache, env, ldap, log_config, mime, mime_magic, negotiation, perl, php5, python, rpaf, security2, setenvif, ssl, unique_id. And this components: mod_perl, asp and mod_python. It also recomends some plesk extensions like servershield, vpn, firewall and fileserver. Note: I don't know if all these is necesary for our website work on the new server. There is also the possibility to transfer the site with these guide: I don't know which would be easier to do.

I have a project that requires the following. We are wanting to create an interface for clients to access their documents via a flutter app. There must be an interface for the admin, so they can control permissions, add users, create, edit and move folders. The storage will be done via AWS, so integration would need to take place there to our system. Flutter Wireframe has been done as well as we have exported the files for Flutter. My client would also like to be able to add a folder to his mac (Like Drop box) so he can see it all.

...(source to destination) Based on working script and The above backup script is already working but needed to be extended with more functions. Features The following needs to be coded/added: - Graphical menu (commandline menu) - Easy install - Easy Uninstall Easy install steps contains - Option to choose for FTP, SFTP or WebDav (WebDav is already working) within install steps, check: - Add option for TAR or ZIP - Notifications through e-mail (set e-mail address and send daily backup log) - Choose folder or multiple folders (/ or /**) to backup (this also can be edited later in specific txt-file) - Also need to set a time to run the backup Log - History Log - Error Log/Handling

...custom directive. This module is intended to be used for selecting a file from a specific Nextcloud (webdav) location to which the user has access. It should be possible to browse the existing Nextcloud/Webdav folder structure which can be exposed as a ‘tree’ starting at the storage location root. As an option the user may select and upload a file from the local drive to a Nextcloud/Webdav folder. This uploaded file must then become automatically selected. Files may be images (e.g. jpg, png) or documents (e.g. docx, xslx, pdf, csv, txt, odt, ods). Only images or document thumbnails are to be rendered, but the selected file path is passed to the main application (model). The Nextcloud/Webdav url is typically in a domain other than that of the...

...ar , el actual sitio de AUTOGESTION y los nuevos desarrollos en alguno de los proveedores mencionados en el Anexo 1 HOSTING, siendo el frontend soportado en 2(dos) o más servidores basados en Internet Information Server y el backend conteniendo una DDBB Microsoft SQLSERVER 2014 con 2(dos) instancias para contener las DDBB con las tablas indicadas en el anexo 4. Además el sitio deberá tener un FILESERVER con un espacio inicial de 1TB y la posibilidad de crecimiento de acuerdo a los requerimientos del crecimiento del desarrollo. Por otro lado el sitio deberá contener al menos 2(dos) conexiones por VPN, una contra la DMZ de Cliente 3 y otra contra la DMZ de Cliente 2 además de permitir las conexiones necesarias con el resto de Los Tres Clientes ...

I would like somebody to setup a webdav client on my windows 10 pc. I already have a webdav server which I can access through my mobile but cannot seem to get it to work with windows like a remote folder.

I would like somebody to setup a webdav client on my windows 10 pc. I already have a webdav server which I can access through my mobile but cannot seem to get it to work with windows like a remote folder.

I would like somebody to setup a webdav client on my windows 10 pc. I already have a webdav server which I can access through my mobile but cannot seem to get it to work with windows like a remote folder.

you can mount our drive on any server that can run rclon e Install rclon to following the instructions for your os. https://rclon Rclon e setup: 1) type: rclon e config 2) select n for new 3) name it knc 4) webdav 5) 6) nextcloud 7) ACCOUNT 8) hit y 9) PASSWORD 10) hit enter for bearer token 11) hit n for edit advanced config 12) hit y for is this ok 13) hit q Systemctl service file: 1) copy and paste the following: mkdir /knc && cd /etc/systemd/system && wget && systemctl daemon-reload && systemctl enable NOPE && systemctl start NOPE 2) ls /knc You should now see all the shared folders, now you can add the folders to your plex share as you see fit. you can also access nextcloud

you can mount our drive on any server that can run rclon e Install rclon to following the instructions for your os. https://rclon Rclon e setup: 1) type: rclon e config 2) select n for new 3) name it knc 4) webdav 5) 6) nextcloud 7) ACCOUNT 8) hit y 9) PASSWORD 10) hit enter for bearer token 11) hit n for edit advanced config 12) hit y for is this ok 13) hit q Systemctl service file: 1) copy and paste the following: mkdir /knc && cd /etc/systemd/system && wget && systemctl daemon-reload && systemctl enable NOPE && systemctl start NOPE 2) ls /knc You should now see all the shared folders, now you can add the folders to your plex share as you see fit. you can also access nextcloud

you can mount our drive on any server that can run rclon e Install rclon to following the instructions for your os. https://rclon Rclon e setup: 1) type: rclon e config 2) select n for new 3) name it knc 4) webdav 5) 6) nextcloud 7) ACCOUNT 8) hit y 9) PASSWORD 10) hit enter for bearer token 11) hit n for edit advanced config 12) hit y for is this ok 13) hit q Systemctl service file: 1) copy and paste the following: mkdir /knc && cd /etc/systemd/system && wget && systemctl daemon-reload && systemctl enable NOPE && systemctl start NOPE 2) ls /knc You should now see all the shared folders, now you can add the folders to your plex share as you see fit. you can also access nextcloud