Pfsense endiandela
...406G 6% / none 2.0G 0 2.0G 0% /sys/fs/cgroup none 2.0G 0 2.0G 0% /dev tmpfs 2.0G 0 2.0G 0% /dev/shm tmpfs 2.0G 116K 2.0G 1% /run tmpfs 410M 0 410M 0% /run/user/0 =================================== CPU Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Thread(s) per core: 1 Core(s) per socket: 4 Socket(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 79 Model name: Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz Stepping: 1 CPU MHz: 2353.271 BogoMIPS: 4200.35 Virtualization: VT-x Hypervisor vend...
...406G 6% / none 2.0G 0 2.0G 0% /sys/fs/cgroup none 2.0G 0 2.0G 0% /dev tmpfs 2.0G 0 2.0G 0% /dev/shm tmpfs 2.0G 116K 2.0G 1% /run tmpfs 410M 0 410M 0% /run/user/0 =================================== CPU Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Thread(s) per core: 1 Core(s) per socket: 4 Socket(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 79 Model name: Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz Stepping: 1 CPU MHz: 2353.271 BogoMIPS: 4200.35 Virtualization: VT-x Hypervisor vend...
Hi all, I have a pool of static "public IP" included into my contract with my ISP. I configured the firewall (pfSense) to allow inbound traffic (direct to a specific Public IP of the pool) to a machine of my LAN (red server in my picture). Server is Win2019. OK, it's works. Inbound traffic to IP4 it works. Now, when the server goes to internet, he surf using the IP assigned to teh Firewall. I need that this machine surfs on internet using the "public IP" assegned (IP4). The firewall has 1 WAN and 1 LAN port only. Due to the fact that I'm managing the server but NOT the infrastructure, I could't obtain an access to FW cfg or interface.
I am looking for a project/task. I have over four years of experience working in different domains using different technologies like Huawei, Cisco, PFSense, M365 Administration, Ubiquiti, Fortinet, Manage engine inventory management, N-Able patch management, TP-Link configuration, remote adoption, up to Windows server 2019 management, AWS workspaces, MDaemon, 3cx administration, VOIP management skype for business, Microsoft teams and many more.
Setup Vlans Multicast forwarding between vlans Wireguard wifi Guest authentication and access Secure LAN ports from unauthorized access setup pfblocker (or similar) and self hosted dns (Ex. pihole + unbound) Note: This is home. Not an enterprise. I also run proxmox with multiple OSs and several iot devices. PFsense is not only the firewall, but also the home router with multiple WAN connections. The ISPs assign IP addresses behind a SNAT, so there is no possibility of accessing the home network from outside by opening ports (hence the need for setting up wireguard)
Hi all, I have a pool of static "public IP" I need support to configure pfSense - to allow inbound traffic (coming from Public IP) directly to a machine of my LAN; - to allow this machine to surf on internet using this "public IP" See the image: the target is "red" computer
I need a Connection to get everytime the same IP Protocolls: - OpenVPN - IPsec - Wireguard --> All Protocolls should work on Mac AND Windows --> Expect the OpenVPN i would like to have a Zertificate WITHOUT Certification --> Wireguard would be great if you can show a QR Code to get the VPN Details So i need you to do: - Install FIrewall - Configur...Protocolls: - OpenVPN - IPsec - Wireguard --> All Protocolls should work on Mac AND Windows --> Expect the OpenVPN i would like to have a Zertificate WITHOUT Certification --> Wireguard would be great if you can show a QR Code to get the VPN Details So i need you to do: - Install FIrewall - Configure VPNs - Create a Guide for me to add users and connections. You can decide betweeen opensense or pfsense cloud based...
I want to load balance my 2x pfense servers and want to start adding VLAN's with ip filtering etc.. at this moment its one flat network and am looking for someone with good pfsense knowledge and that can assist me in adding VLAN's to my network. The switches are TP Link and HP Aruba with vlan capabilities. Also the network is virtualized with XenServer. You must have good pfsense and networking knowledge. I am quite knowledgeable but this cannot go wrong due to having minimal downtime hence i want an extra set of brains to think with me and assist when migrating.
Ok, so I have to access a database that is hosted by a service provider. The topology is My SonicWall TZ270(Subnet A) high availability Connected with a Site to Site to The PFsense(Subnet B) and I can ping the Firewall ANd them have PFSense (Subnet B) vpn with the server on (Subnet C) But I cant ping that subnet C The service provider, gave me all the PFSense configuration and said that if its done right I should be able to access the database in Subnet C from Subnet A, however I cant change anything of pfsense configuration obviously.
Necesito solucionar problemas de conexión entre un servidor OpenVpn corriendo en PFSense y las ultimas versiones de OpenVpn que corren bajo win11.
Hello, I think the above subject explains it all. We want to configure pfSense to have IPv4 LAN with DHCP to IPv6 WAN. Can you help? Thanks. Simon
Do not contact me if you think you can look this up on the net and get paid for it. I need someone who fully and completely understands pfsense, inside and out. I have two pfsense boxes connected with WAN. Each has a WAN and LAN interface. I need both to forward traffic to one pfsense box. The main pfsense has its own WAN and LAN plus another interface to communicate with the other two firewalls. You will not have access to anything, we will do this using chat on this site. I will share diagrams as needed.
I need to have fixed a site-to-site VPN between pfSense and Mikrotik devices. The VPN connection works but Mikrotik's subnet is not reachable from pfSense's network side. Instead, everything works properly using OpenVPN client on a single computer. Moreover, I would like to have explanained what the issue is and the related solution.
Currently using 2 pfsense in our network. Handling problems between those routings.
I need help getting a port open on my pfsense router. I've gone through the steps but it's not working and I'm not sure what I'm doing wrong.
-install and config proxmox -install and config Pfsense -install and configur network of all VMs
READ FIRST PFSense firewall config. firewall has 3 Interfaces, 1 public, 1 int, 1 service. on the email server in LAN int the email traffic should be nat translated too. webmail site should work. - dns forwarder - NAT - country block lists, facebook and google spyware blocking - Intrusion detection system - the usually security measure maybe the email server is something wrong configured, need to be fixed traffic between network int and service like file share. you will do the job ONLY per teamviewer on my notebook. if you are trying to tell me you need a couple of days, you clearly doesnt know pfsense or firewalling. the job needs max 4 hours - on the end its nothing more than create 30 rules (round about)
We have two Linux VM's running on our Windows Server 2019 PC which one provides us with a ticket system (used via browsers on our office PC's) and the other runs pfsense for our VPN access. Our server had a problem with what looks like the network adapters and now we are unable to see the ticket system on our office PC's. Im looking for somebody who can remote access into our Server PC and fix this issue, which I think is with the vEthernet adapter setup for the VM's in Hyper-V.
I need an AWS architect to help deploy servers along with a 3rd party firewall pfSense.
VPN already configured but only able to reach pfsense server
I need someone to help me make Ubuntu server startup program to auto boot and go to the simple text-based menu screen that should show the current IP address of the Internal network card similar to how pfsense has (see attached image file) and the menu with few of the menu options shown in an attached image file. We need options 0, 2, 3, 5, 7, 9, 11 shown in attached image and two more new options. New option 1. start Intel_gpu_top which is similar to htop and new option 2. restart our launch service using systemctl. Our unit is running a simple web application on an ubuntu server v. 20x on Intel based MiniPC. It has to be very secure, and user should not be able to do anything else or break out of that menu or while it's booting into the menu. option 2 must use netplan, as ...
OpenVPN configuration using pfsense firewall server
We have a small Data Center network with about 15 servers as well as 2-3 remote offices connected 24/7 via VPN. We Require Experience and Expertise in the Following Systems: - PFSense Firewall Expert to configure and manage multiple locations via Open VPN - Network & Server Admin for Linux and Windows Servers - VMware ESXi VCenter Virtual Server Installs and Management - Website Server setup and management for various website platforms We can pay negotiable Flat Rate Per System Install and configuration tasks as well as Hourly for Systems Maintenance. A Monthly Standby Tech Support for Network and Server Admin is also an option.
We have a small Data Center network with about 15 servers as well as 2-3 remote offices connected 24/7 via VPN. We Require Experience and Expertise in the Following Systems: - PFSense Firewall Expert to configure and manage multiple locations via VPN - Network & Server Admin for Linux and Windows Servers - VMware ESXi VCenter Virtual Server Installs and Management - Website Server setup and management for various website platforms We also run and maintain the following Systems: - Zimbra Email System - FreePBX system - VEEAM Backup System - RocketChat System - Element System - NextCloud System - Filemaker Database Server Experience in these system is a Big Plus! We can pay negotiable Flat Rate Per Server/System Install and configuration tasks as well as Hourly for Systems...
I have a problem with pfsense connections in-network with internet and pinging with machines for ( LAN,OPT1,OPT2) and answer the questions required . ( i already built all the VM machines ) It just need connections and pinging with answers the question thank you
Hi Mahmoud H., I noticed your profile and would like to offer you my personal project. You have amazing experience within networking on a much higher level then myself, would you assist with some iptables routing between my home enterprise racks/server, pfsense and public server which is where I'm having the most difficulty. All of which you and I can have remote access too :)
I need someone to config and teach me how to do it
Hi, I own a server with VMWARE ESXI running, PFSENSE in a VM running and I need an admin with good skills in linux admin, vmware and knowing odoo configuration to : - Install in a VM Bitnami ODOO 15. - Configure ODOO15 community edition with fixed IP, hostname, ssl, pdf generator, pfsense port forward, email server to send and receive mail in odoo, client portal, all up and running - Check installation and full Odoo working. Thanks for your interest. Thomas.
Preciso migrar do OpenBGP para o FRR e busco profissionais que tenham conhecimento para realizar essa migração.
...monitoring and backups through VeeamOne and Veeam Backup and Replication, regular activities include the creation and configuration of new VMs, distribution of the VMs through hosts, etc. . 3. Agile recovery (Veeam Instant Recovery) of one or more virtual machines running on VMware and being backed up by Veeam in the event of a failure. Conduct drills (about one per month) 4.- Administration of pfSense Firewalls running on the virtual infrastructure. 5.- Health status monitoring and management of ~ 30 HPE ProLiant DL380 G7, Gen8, Gen9 servers through iLO interface. The service aims to proactively identify failures through the Systems Insight Manager tool as well as take care of them in an agile manner (request to send spare parts, remote advice on their replacement) before the...
hi do you have knowledge about connecting between two site by IPsec ? about PFsense between three sites in VM
hi do you have knowledge about connecting between two site by IPsec ? about PFsense between three sites in VM
hi hi do you have knowledge about connecting between two site by IPsec ? about PFsense between three sites in VM
hi do you have knowledge about connecting between two site by IPsec ? about PFsense ?
I have two instances on AWS, On the same VPC. The first one is a Windows server 2012 R2, and the second one is an image I launch from AWS market pfSense firewall with OpenVPN. - I need to configure the pfSense firewall to the ability to connect the windows machine through RDP. - Should configure both sides RDP from firewall rules, NAT side and AWS security group side, and test it. - Configure the OpenVPN inside the pfSense firewall and that covers all internal network configuration, and test it.
...Backup and Replication, actividades habituales de creación y configuración de máquinas virtuales nuevas, organización, distribución de las mismas, etc. 3. Recuperación ágil (Veeam Instant Recovery) de una o varias máquinas virtuales corriendo en VMware y siendo respaldadas por Veeam en caso de que exista un fallo. Realizar simulacros (alrededor de uno al mes) 4.- Administración de Firewalls pfSense corriendo sobre la infraestructura virtual. 5.- Monitoreo y administración del estado de salud de ~30 servidores HPE ProLiant DL380 G7, Gen8, Gen9 a través de la interfaz iLO. El servicio pretende identificar proactivamente las fallas a través de la herramienta Systems Insight Manager así com...
Hi We are looking for a PFsense expert who can work on the following - Installing PFsense in VMWARE environment (ESXI) - Configuring and troubleshooting pfsense issues - Writing FW rules - Configuring OpenVPN. All the work has to be documented. The work will be started immediately
To configure or develop Wifi Hotspot that enable to authenticate using radius. User also able to use their social media account as authentication. If user was authenticated, then he/she able to access or browse internet. Can browse as example only to give an idea of concept. Can configure using open source/proprietary software like mikrotik, pfsense, windows server or else. Wifi Access Point type - normal mid range TPLINK unit
Hello! Can you contact me about Scalelite + TURN + BBB setup? What i need: Setup Scalelite + TURN + BBB. Each BBB server have only private IP address and located behind firewall (pfSense). We have internal and external users.
I need a Wordpr...website sign up (will be a subscription model for monthly rent or additional offerings) and input it in the correct fields in a local access database to provide the user with a door access code upon sign up. A local VPN will be set up to allow database connection. Then a user should be able to edit their passcode through their Wordpress profile. Additionally, the plugin should connect remotely to a pfSense instance () to create a new captive portal login and password for local wifi that is then displayed to the new user. The plugin should also automatically restrict access within the door access database and wifi access if an account is disabled on Wordpress, either from admin input or through automatic action secondary to nonpayment of rent or fees.
I have a self host website and I am unable to make publicly available using pfsense Acme and haproxy. I do not want to use port forwarding in this scenario. I dont need website build or coding just properconfiguration of pfsense acme and HAproxy
Hi, first, to prove you are not a bot, please answer to this message with the word "Antani" Other replies will not be taken into consideration. I need help to setup/strengthen my home lab network with pfsense. I used to do these things myself but I found out I don't have time anymore. This network has: - a dual WAN - a couple of servers with different services running, some open to the internet - a few desktop clients - a number of mobile devices on different wifi SSIDs - printers and such - a number of security cameras - a number of IoT devices (alexa/home automation) - other stuff IMPORTANT: I am not asking you to actually access to any of my devices or configure anything directly For an hourly rate, you will chat with me on Discord (or wherever you want) and le...
Need to configure pfsense with openvpn and lightsquid. We need to monitor all the user activity which are connected via our openvpn.
PFSENSE: Need help to configure Server Client VPN I have two PfSense installed at two remote sites. We need help to configure VPN and connect both the sites.
I wish to undertake a series of training and long-term support projects (no single one-shot activity) for the migration of some Router and wifi solutions from various brands (Cisco other Pfsense) to Mikrotik. I am asking for this activity to have a growth not internal but lateral to my small structure, we are 4 people who do the management of IT for small and medium-sized enterprises. Can you help me ? I have nothing urgent just to organize reports and costs.
We are looking for 4 pfsense Firewall experts to run Dev opps Security.
We have install pfsense with default settings. You will need to install and configure : 1) OpenVPN. 2) Squidproxy + Lightsquid . . Once all the things are configure you will need to make sure that we are getting user wise activity report via lightsquid.. Final output : Each and every user connected via openvpn and their report is generated. Need documentation once project is done. Thanks.
We have install pfsense with default settings. You will need to install and configure : 1) OpenVPN. 2) Squidproxy + Lightsquid . . Once all the things are configure you will need to make sure that we are getting user wise activity report via lightsquid.. Final output : Each and every user connected via openvpn and their report is generated. Need documentation once project is done. Thanks.
Need to configure pfsense with openvpn and lightsquid. We need to monitor all the user activity which are connected via our openvpn. You will need to provide document on the task after successful completion.
