Lora zlatanovadela

I'm in need of a talented (artificial intelligence ) AI artist who specializes in creating anime-style character designs. ( stable diffusion - mid journey - Leonardo - Lora - etc ) ( consistent characters ) This character will need to be crafted with care, detail, and creativity. Key requirements: - Impeccable anime-style illustration skills - Ability to accommodate multiple revisions as we fine-tune the character design Pose Variety: The character will be required in 50 different positions/poses, each drawn professionally. You should have a strong understanding of anatomy to ensure consistency and quality in each pose. Emotion Portrayal: While there are no specific emotions to be portrayed, the versatility of expressions should be inherent in your design approach. ...

I'm in need of a talented (artificial intelligence ) AI artist who specializes in creating anime-style character designs. ( stable diffusion - mid journey - Leonardo - Lora - etc ) This character will need to be crafted with care, detail, and creativity. Key requirements: - Impeccable anime-style illustration skills - Ability to accommodate multiple revisions as we fine-tune the character design Pose Variety: The character will be required in 50 different positions/poses, each drawn professionally. You should have a strong understanding of anatomy to ensure consistency and quality in each pose. Emotion Portrayal: While there are no specific emotions to be portrayed, the versatility of expressions should be inherent in your design approach. Ideal Candidate: You should...

We are looking for a professional with skill and experience in C programming language in embedded code for RF transceiver modules, particularly experienced with NTR09RSL8 and NTR09CSL8 868MHz LoRa RF Transceiver modules. Your task is to develop and test code to accurately depict their abilities and limitations, we expect the final work to be thoroughly tested, well-commented, and ready for deployment. Here below are the basic requirements; 1- SX1262 drivers should be used (from Semtech) 2- Test Code (for the flowchart/detailed requirements which will be provided to engaged candidate) should be tested in Nucleo-L432KC or Nucleo-L476RG 3- Deliverable is the Test Code Ideal Skills and Experience: - Proficiency in radio frequency transceiver modules particularly NTR09RSL8 and NTR09CS...

Projekt Lora to instalacja składająca się z czujnika wilgotności gleby, czujnika antyprzymrozkowego, stacji bazowej, sterownika w komunikacji LoRa (do 500m). Dalsze szczegóły projektu w załączeniu. Zainteresowanych proszę o: - opinie o projekcie, możliwości doboru sprzętu, oprogramowania, konfiguracji i wdrożenia - ocenę wykonalności wraz z propozycją założeń sprzętowych i programowych - możliwość wykonania prototypu w wersji testowej na potrzebnych modułach - wstępny budżet projektu wg w/w założeń

I'm in need of a private LoRa based system that's going to help me monitor and control my pumping systems. - I need the system to specifically monitor the flow rate, switch pumps on/off and also keep an eye on the tank levels. The main goal of this project is to provide me with an understanding of how the system is designed and how the various elements of its architecture come together to facilitate data collection and pumping control. Ideal Skills: - Experience with LoRa based systems - Knowledge of sensor integration and monitoring - Ability to design user-friendly control interfaces - Understanding of pumping systems and their integration with IoT technologies It is important that you're able to provide me with tuition on the system, so that I can ope...

We are looking for an expert in embedded code for RF transceiver modules, particularly experienced with NTR09RSL4 and NTR09CSL4 433MHz LoRa RF Transceiver modules. Your task is to develop and test code to accurately depict their abilities and limitations, we expect the final work to be thoroughly tested, well-commented, and ready for deployment. This project involves long-range connectivity. and NTR09RSL4 and NTR09CSL4 433MHz LoRa RF Transceiver modules are earmarked for integration in IoT devices, hence an affinity for IoT application development will be valuable. Ideal Skills and Experience: - Proficiency in radio frequency transceiver modules particularly NTR09RSL4 and NTR09CSL4 - Familiarity with IoT application development - Solid experience in coding for wireless hand...

...who can help me set up an interface between my Arduino and Lora SX1278. This project involves two primary components: setting up the Lora SX1278 interface and controlling a relay on the receiver side. Key Requirements: - Lora SX1278 Interface Configuration: I need to establish a reliable, long-distance communication channel between two Arduinos. The Lora SX1278 module should be set up for low power consumption and secure data transmission. I would like the system to be able to send and receive data effectively. - Relay Control: On the receiver side, the Arduino should be able to turn on and off a relay. This should be accomplished using the Lora SX1278 module. The relay control can be either manual (via a button), remote (via the Lora module), ...

...a skilled programmer to help me with a project that involves setting up data communication between Arduino devices using Lora technology. Key Project Details: - The project involves simple packet sending between devices, specifically focusing on transmitting GPS coordinates. - You need to be proficient in Lora programming for this project. Previous experience in similar projects is highly desirable. - The sensors that need to be integrated with the Arduino for remote sensing and monitoring include temperature and humidity sensors, soil moisture sensors, as well as motion detectors. Ideal Skills and Experience: - Strong Arduino programming skills. - Proficiency in Lora technology. - Experience with integrating various sensors. - Experience with GPS location data h...

I'm in the final stages of a project involving Esp32 and ebyte LoRa modules. My main issue is the unreliability of the network connection and the slow data transmission speed. I need an experienced professional who can help me optimize these aspects to get the project completed. Key requirements: - Strong experience with programming and coding for Esp32 and ebyte LoRa modules - Previous experience in troubleshooting connectivity issues and optimizing data transmission Please reach out if you have demonstrable experience in this area. Must be available to work on project immediately and have it completed within a few days.

We are looking for an ESP32 coder that can work on a "per project" basis. For the first project, the hardware has already been designed and assembled. Your main responsibilities will be to write code to ensure that the ESP32 adequately read the data from the INA226 Current & Voltage Sensor and ...looking for an ESP32 coder that can work on a "per project" basis. For the first project, the hardware has already been designed and assembled. Your main responsibilities will be to write code to ensure that the ESP32 adequately read the data from the INA226 Current & Voltage Sensor and then transmit the measurement data via LoRa. Key Requirements: - Proficiency in ESP32 programming - Previous work with sensor and sensor module integration - Familiarity with...

...imagine designing a logo from my initials J and K as in "Variation 1". At the end of the animation you should see the full name of my company and the complete slogan. Please put the slogan in italics to visually distinguish it from the rest. Please adhere to my corporate design: Jan Kohler Unternehmens- & und Gründungsberatung: Blue: #2d307d Grey: #ede9e5 Other font colours: Gold, black, white, Font: Lora, Montserrat Classic...

I am in need of a seasoned developer with proficiency in working with RF modules and LoRa technology, or similar, to create a system that can compute the distance between two RF modules. I am seeking a skilled developer to create a system that calculates the distance between two RF modules using LoRa technology or a similar module. The system should operate within the 2.4 GHz or sub-GHz frequency bands. Required precision of the measured distance in outdoor environment is 10 meters (can be 100 meters in the first version). If you have expertise in RF communications and embedded software development, I encourage you to bid on this project.

Hi Lora O., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

I am looking for an experienced professional who can help me bring my health band concept to life. The ...manufacture of the product, with specific focus on the following features: - Heart rate monitor - Sleep tracker - Step counter - Temperature sensor - PPG sensor - Accelerometer - GPS - LORA The design aesthetic should be minimalist, focusing on delivering a sleek and user-friendly product. My primary goal for this health band is that it serves as a health monitoring device. I am looking for a freelancer with a background in product design and manufacturing, with a clear understanding of health band technology and capabilities. Your experience in PCB design and manufacture, along with working with GPS and LoRA technologies, will be essential for the successful delivery...

In this project, I'm looking for an experienced engineer to assist in setting up a LORA node that will operate within a range of 1 to 10 kilometers. The LORA node will be designed to collect data on two environmental parameters: temperature and humidity. Requirements: * Expertise in LORA node set up * Experience with environmental data collection * Understanding of medium range data transmission * Familiarity with battery-powered devices The successful freelancer will provide thorough guidance on configuring a LORA node to meet these requirements. Experience in similar projects will be highly appreciated. Knowledge on battery longevity and power conservation is a plus.

...humidity and temperature in buildings utilizing LoRa (Long Range) technology. Your role is to ensure a seamless wireless communication and direct uploading of data to the cloud, resulting in real-time monitoring and data collection delivered to a personal real time base database such as Postgres. Here's a summary of what I require: * Real-time monitoring and collecting humidity and temperature data from residential and commercial buildings. * Designing a system that is not only efficient but allows easy installation and setup. * Integration of the system with a cloud-based personal real time base database. Skills and Experience Required: * Proven experience in IoT designs and implementations * Expertise in climate data monitoring and LoRa technology * Experience ...

For this project, we're seeking a proficient developer to create a monitoring system that combines the abilities of an ESP32 camera with LoRa Module. Project Details: Only you have to interface LoRa module with ESP32 cam. Deliverables - 1. Wiring connection diagram between Lora and ESP32 Cam 2. Testing Firmware for the same If you have the necessary skills and experience, we look forward to seeing your bid. Krishnakant Upadhayay [Removed by Freelancer.com Admin for offsiting - please see Section 13 of our Terms and Conditions]

...the following parts. Transmitter Several buttons are connected to the ports of an Arduino Pro Mini. When the respective button is pressed, and the gate goes low, a signal is sent to the receiver. The signal is sent with LoRa. (RFM95 433MHz) The transmitter is powered by 3 AAA batteries or an equivalent battery. The power circuit is replaced with a circuit that draws very little power. see this video Create a Gerber file for the PCB. Receiver The receiver is an ESP32 Node MCU with both WiFi and LoRa. for example Heltec WiFi LoRa 32(V3). The receiver has relays, dimmers for led lights, (possibly a camera) and a button to pair the device. Power from USB. Cost of Gerber file is reported separately. Mating The ESP32 has a web page, which shows the

I am currently seeking for a highly skilled individual to fine-tune my custom LLM using my specific data which is present in PDF format, which might be need to convert to a QnA dataset for fine-tuning. Key tasks: * Preparing the data from PDF to QnA Ideal skill...individual to fine-tune my custom LLM using my specific data which is present in PDF format, which might be need to convert to a QnA dataset for fine-tuning. Key tasks: * Preparing the data from PDF to QnA Ideal skills: You need to have expertise in the following areas: * Machine Learning Experience: * Experience in data formatting and preparation is crucial. Being familiar with fine-tuning using LORA or QLORA or other fine-tuning Methods I want someone who is skilled enough to perform the above task in a cost-effe...

I'm seeking an expert familiar with the Core1262-HF LoRa Module SX1262 chip to interface with esp8266. your job will be to give me a sample code that i can test it. Key Requirements: - Experience with Core1262-HF LoRa Module SX1262 chip - Expertise in working with esp8266 Skills & Experience: Ideal candidates will have proven experience in: - IoT connectivity solutions - Working with Core1262-HF LoRa Module SX1262 chip and esp8266 for more details of the lora module refer

Develop simple application to send data over Lora module controlled by ESP32 module based on ADC and GPIO values.

I am on the hunt for a freelancer with a strong understanding of...hunt for a freelancer with a strong understanding of sensor data integration for an IoT project. The main goal of this job is to configure an Air Pressure Sensor with a Heltec LoRa ESP 32 v3 board to have consistent sensor data transmission and establish long-range communication. Key deliverables of this project would be: - A successful integration of the Air Pressure Sensor with the Heltec LoRa ESP 32 v3. - Configuration to ensure efficient sensor data transmission. - Development and testing for long-range communication up to 1 kilometer. The ideal freelancer for this job would be someone with expertise in Esp32, LoRa, IoT, and sensor integration. Prior experience working with air pressure sensors wi...

We have a project that consists in swapping the person of some images, for a consistent LoRA character in HD We have to find a workflow that is better to the one they have here: that consists in segmenting the clothes, masking it, and generating by inpainting the model with certain controlnets in order to have consistency. This technique uses OpenPose + IpAdapter + Segmentation in order to mantain the clothes intact and generate the virtual person outpainting around the clothes. We need to use a LoRA of the virtual person to mantain the same person (same face, same hair lenght, same skin tone) all the time even if there are changes on the pose of the base image. Can you generate a workflow with Automatic1111 or ComfyUI to create this type of images

CubeSat satelite will be at least 550km above the earth. Elevation angle will be 20 degrees. LoRaWAN protocol will be used for the communication between sensor and CubeSat. Sensor could be any sensor like temperature and humidity sensor. Sensor transmitter power will be at least 23dBm. Tx uplink frequency will be from 148MHz to 150MHz (10 channels from 148.1MHz to 149.9Mhz with 200kz between channels, LoRa bandwidth 125KHz) RX downlink frequency will be from 137MHz to 138 Mhz ( total 3 channels, RX1 137.1MHz, RX2 137.3 MHz, beacon 137.1 MHz). LoRaWAN Protocol version will be 1.0.3. Sensor should support Clas A/B/C operations. Jobs that will be done: 1) Hardware Design of a LoRaWAN IoT sensor ( Schematic, Layout, PCB) for the given frequencies usin SX1276 chip 2) Custimization of LoR...

I need an experienced designer to work on my embedded system project. Your primary task is to create an IoT device integrated with sensor systems, using esp32 and LoRa RYLR498 modules. Key Responsibilities: - Designing a functioning PCB circuit - Creating an appropriate enclosure design - Implementing sensor integration into the IoT device Skills and Experiences: - Previous experience with embedded system design - Proficiency in working with esp32 - Familiarity with LoRa RYLR498 modules - Experience in IoT device development and sensor integration - Understanding of LoRa connectivity. Your extensive background in these areas will ensure a seamless development of the IoT device that meets our requirements.

...We have developed an intuitive GUI to simplify configuration and operation processes. • Field Node Configuration: Each field node, spaced at intervals exceeding 150 meters, is equipped with two digital outputs and two digital inputs. These nodes utilize Raspberry Pi Pico microcontrollers for efficient data processing and wireless communication. • Long-Range Wireless Communication via LoRa: The system employs LoRa modules for robust long-distance wireless communication between the main node and field nodes, ensuring uninterrupted connectivity even in remote areas. • Comprehensive User Interface: The main node's interface includes: o Configuration Page: Effortlessly configure and pair field nodes. o Real-Time Dashboard: Monitor and control field nodes, re...

$50 - Get my Arduino drone to fly!! I have an Arduino hex drone that I am making, and I need it to fly in a route to 2 locations, then return to base, from server command. It has: - Arduino Mega - gyroscope MPC60 (giving negative values, but working) - LoRa chip for sending / recieve data (working good) - ultrasonic sensor for height (working good) - barometer (not used) - 6 motors with ESCs Current issues: - stabilization from gyroscope - hovering in place - fly to 3 locations - server command (LoRa command from other Arduino) If you can help me with better C# or code, to get everything working correctly, will be great & can give 5 stars feedback This can turn into more jobs too, we are a small drone company and I work on this every day. Can hire assistant to help...

More details: What type of devices will the firmware be developed for? Consumer electronics What programming languages do you prefer for this project? C++ Are there any specific functionalities or features that the firmware should include? Bluetooth connectivity, Firmware update over-the-air (OTA), Power management, Possibly WiFi or LoRA instead of Bluetooth. I'm seeking an experienced firmware engineer specialising in commercial weighing equipment. I'm looking for advice on commercial weighing scale PCBs, firmware development, etc. Please note: The project will commence at the begining of April.

...will focus on textual modifications. Key Modifications Include: - Replacing the current text at the bottom with "Essences & Botanicals." - Eliminating the numbers "18 67" entirely from the design. Font Considerations: - I am inclined towards maintaining the aesthetic coherence of my logo. Hence, if you possess the ability to identify or closely match the current logo's font, which is potentially 'Lora' or something very similar, it would be highly advantageous. - The new text, "Essences & Botanicals," should seamlessly integrate with the logo's design, adopting a style that complements its essence. While I believe the original logo font should suffice, I'm open to suggestions if you have a compelling alternative tha...

I'm in need of an expert in machine learning to train a model from a series of photographs, ultimately enhancing image diffusion for more stable results. The intended application is for the creation of Virtual Fashion Models. I need to create a model from a set of images to generate realistic photographs of my clie...training. - Use case testing with Stable DIffusion. -- I need to save the configuration files to have a backup copy, if you can record screen when making certain configurations it will be excellent. Ideal Skills/Experience: - Expertise in machine learning - Understanding of stable image diffusion - Experience with image enhancement, denoising, and reconstruction - Familiarity with the "LORA" model - Background in Virtual Fashion platf...

I am seeking an experienced developer or team to construct a Lora Mesh network utilizing ESP32 for effective energy management within a smart metering system. This project's primary goal is to enhance our capacity for data collection, real-time monitoring, and energy optimization across multiple sites. Key Requirements: - **Development of a Lora Mesh Network:** Utilize ESP32 chips to establish a reliable, efficient mesh network capable of covering extensive areas. - **Energy Management Features:** - **Real-time Data Analysis:** Implement algorithms capable of processing and analyzing data on-the-go for immediate insights. - **Threshold Alerts Setup:** Enable customizable alerts for when specified energy consumption thresholds are exceeded. - **Predictive Mainte...

Lora training and inferencing script in Python

I am seeking an experienced firmware developer able to create a LoRa firmware using HOPERF RFM95W for the purpose of device communication. It's essential for the successful freelancer to have experience in creating similar firmware and provide examples of past work in their applications. Though not specified, a strong understanding and experience with commonly used microcontrollers is advantageous. Ideal Skills: - Experience developing LoRa firmware - Familiarity with Hoperf RFM95W - Strong understanding of commonly used microcontrollers - Excellent portfolio demonstrating past work.

Subject: Join Our Innovative Development Team at weR – Exciting Opportunities in IoT and Machine Control Dear Prospective Team Member, At weR, a small Technologie startup, we are passionate about pioneering in the field of advanced control systems for machinery and plants, emphasizing IoT connectivity and modern communication structures like IP500 and LoRa. We are currently at a thrilling juncture as our proprietary control system moves from prototype to production phase, signaling a significant step towards impacting various industrial sectors. Our systems are multi-modular, relying on a Linux computer with an UBUNTU 20.04 kernel, as well as ESP32S3 Boards for other modules, with development primarily in Python for PLC software and C/C++ for ESP32S4, using Visual Studio Code ...

I'm seeking a Python and machine learning expert who is familiar with stable diffusion model training in LORA. The end goal is to re-train a stable diffusion model with faces from different folders. The training will be done locally on a Windows PC

I am seeking a professional to create a LoRa IoT Jammer with the primary purpose of preventing unauthorized access. The successful candidate should have expertise in IoT communication systems and security strategies. Scope: - The jammer should operate on a small scale, less than 100 meters. - It needs to be effective against Communications and Tracking devices. Required Skills and Experience: - Comprehensive technical understanding of LoRa devices and technology - Proven successful experience in IoT communication jamming - Thorough knowledge of IoT security vulnerabilities and preventive strategies. This project is critical to my IoT security infrastructure; therefore, only experienced and highly skilled professionals should bid.

I am seeking a professional to create a LoRa IoT Jammer with the primary purpose of preventing unauthorized access. The successful candidate should have expertise in IoT communication systems and security strategies. Scope: - The jammer should operate on a small scale, less than 100 meters. - It needs to be effective against Communications and Tracking devices. Required Skills and Experience: - Comprehensive technical understanding of LoRa devices and technology - Proven successful experience in IoT communication jamming - Thorough knowledge of IoT security vulnerabilities and preventive strategies. This project is critical to my IoT security infrastructure; therefore, only experienced and highly skilled professionals should bid.

I'm in the midst of trying to finetune a Mistral 7B model with my own data. The training itself is up and running smoothly, but I've run into a hitch. I'm struggling to merge the lora with the base model. Each time I attempt to do this, I am greeted with an error message about 'peft_type', a term with which I am not familiar. The specific error is KeyError: 'peft_type'. Regrettably, I don't have much further information on this 'peft_type' error. For those wondering about the technology stack on this project, I'm working with Python on an Ubuntu 22, cloud-based server. Attached is my actual script Skills and Experience: - Deep understanding of Python and its application in machine learning - Proficiency with Mistral 7b model...

I need to put ESP32-S3 in deep sleep, there is an EBYTE E220-900T30D LoRa modem that wakes up ESP32-S3 by sending the AUX PIN down. ESP32-S3 wakes up and creates the E220 object, which opens the HardwareSerial port, emptying the modem buffer. This is a problem because the message received is lost. We are trying to put ESP32-S3 in deep sleep but with ULP active and with a HardwareSerial listening, when the modem sends the AUX PIN down, ESP32-S3 wakes up and waits for the coprocessor to pass it the received message. Development environment details: I use VSCode with Platformio extension and framework: arduino

Prosimo, vpišite se ali se prijavite za več podrobnosti.

I want to send messages from LILYTbeam attached to laptop to 4 other LIlygo TBeam Devices. Receiving devices need to have a screen to view messages and acknowledge the message by pressing a button etc.

I need a LoRA model made from a single image. Two things you need to deliver 1. the LoRA model 2. procedure manual

I am looking for a freelancer who can help me develop an image and video transmission system over LoRa modules for long-distance communication and internet connectivity. The system will be using ESP32. Expected Communication Range: - The LoRa modules should be able to communicate up to 1 km. ESP32 Module: - I am open to suggestions for the specific ESP32 module to be used for this project. Required Features: - The system should be capable of real-time transmission of images and videos. Ideal Skills and Experience: - Experience with LoRa modules and ESP32 development. - Knowledge of image and video transmission protocols. - Ability to design and implement a reliable long-distance communication system. If you have the necessary skills and experience, please submit y...

...to create a modern and trendy candle label and logo design for my brand. I have specific colors in mind that I would like incorporated into the design. Additionally, I have a specific idea for the design, but I am also open to the designer's creativity if they have any ideas. I am thinking of a white background with silver foil writing and blue ..something. i like the Cinzel Decorative font with Lora. it is inspired by the Finnish flag so that is the blue i am looking for. It's called "sea blue". The company name is Usko & Ahti Skills and experience needed: - Proficiency in graphic design software - Experience in creating modern and trendy designs - Strong understanding of color theory and the ability to incorporate specific colors into the design - Crea...

Prosimo, vpišite se ali se prijavite za več podrobnosti.

Necesito un diseño de un ear tag con una placa que contenga red LoRa, que se conecte a un gateway principal. Tambien necesito almacenar información, que sea de fácil acceso, como ser nfc por ejemplo.

...firmware for IoT devices and must be proficient in the C programming language. Specific Features: - WiFi LR/LORA connectivity to edge/end nodes upto 5 devices - PoE : The firmware should support WAN/LAN to enable the router to connect to the internet. - 4G Support. Other device through WiFi or Ethernet to connect to internet via 4G GSM - Support Industrial IP Protocols such as Modbus/CAN - HTTP/MQTT support for AWS & Azure Cloud: The firmware should have HTTP/MQTT support to facilitate communication with cloud. - Web server functionality: The firmware should have web server functionality to allow for remote access and control features like enabling/ disabling wifi, Ethernet, LTE, Lora and set modes like LR, AP or station. Set network priority etc. - Persist Config upo...

I am looking for a freelancer who can help me connect a 2.9" Red and Black e-paper display to my Heltec ESP32 LoRa V2. The project requires the display to be able to display text. I need a sample INO and the hardware connection diagram. I tried already the version INO which I attached a copy. Skills and Experience: - Experience with connecting e-paper displays to microcontrollers - Proficiency in Arduino programming language

I am looking for a freelancer who can help me connect a 2.9" Red and Black e-paper display to my Heltec ESP32 LoRa V2. The project requires the display to be able to display text. Skills and Experience: - Experience with connecting e-paper displays to microcontrollers - Proficiency in Arduino programming language

I want to control Robot in Real-Time. Remote control with LoRa is used to control the robot : - Arduino Based - LoRa Ra-02 455Mhz - LCD 20x4 On the other hand, Robots: - Arduino Based - LoRa Ra-02 455Mhz The remote should send and review data in real-time, there should be no delay. if I press any button on the remote, the robot should immediately take action ( you don't need to do anything with action, only in the code put it as Serial print in the serial monitor to see the effect, the rest of the code I will handle ) robot data will be shown in the LCD. The robot will also send data to the remote. assume that every 50ms will send data back to the remote, to keep the connection. the connection should be stable. Note: - There should be no interference betwee...