Autodesk Revit Jobs

I’m handing over a partially built Revit model and need it developed into a fully documented, presentation-ready interior architecture package. The scope covers structural elements (slabs, roof, ceilings, stairs, elevator) and then moves straight into interiors: loading the right FF&E families from BIM Object, RevitCity or Herman Miller, applying materials and lighting, and designing a custom reception desk that fits a clean, modern aesthetic throughout. Once the model is complete, I’ll need exterior sitework and landscaping added, plus camera setups that deliver medium-detail, good-looking renderings—photo-realism isn’t required, but they must read convincingly to clients. A short animated walkthrough (AVI) should round out the presentation. For documentation...

I have a complete point cloud capture (Autodesk ReCap) and matching 360° photos of an existing facility, but there are no legacy drawings or existing models available. I’m looking for support converting the facility into an accurate Scan-to-BIM model in Revit for upcoming renovation planning. The project includes only one interior mechanical room; all other systems are primarily exterior and roof-mounted. Scope of Work Develop existing-condition models for the following disciplines: (HVAC) / Piping Level of Detail: Intermediate LOD focused on clean and accurate geometry, including key renovation-related components such as: mechanical equipment fixtures systems accessories The priority at this stage is geometric accuracy. Detailed asset information, tagging, and high...

I’m finalising the design of a 45 ft × 60 ft need a seasoned drafter who can turn the concept into a full construction set—fast. You may work in Revit, AutoCAD, or a hybrid workflow, but I’ll need the native files and clean PDFs in both formats at hand-over. The first milestone is time-critical: fully coordinated GFC drawings and building sections must land on my desk as soon as possible so site work can begin without delay. Once those are signed off, we’ll move straight into the remaining sheets. Key deliverables • GFC plans, sections and elevations • Electrical and plumbing layouts with clear legends • Rain-water pit and storm-water detailing • Door & window schedules tied to the plans • Staircase and toilet details ...

I have a set of hand-sketched drawings that need to be translated into a clean Revit model and sheet set. The finished drawings must respect an eco-friendly architectural approach, so please weave sustainable-design notes, material tags, and passive-layout considerations into the documentation. While PDF sheets are fine for interim reviews, the native Revit file is the non-negotiable deliverable. In parallel, I need a quantity takeoff focused only on the Hollow Concrete Block (HCB) work. Feel free to extract the data straight from the Revit model or use your own estimating tool, but deliver the results in an editable spreadsheet that lists unit counts, volumes, and the assumptions behind them. The third item is a reusable weekly progress-report template—Word or Excel is fine&md...

I am seeking a skilled freelance draftsman/CAD partner to transform my design concepts, markups, dimensions, and selections into organized construction document sets. Requirements: - Software Proficiency: Chief Architect is essential. Experience with SketchUp, CAD, or Revit is a plus. - Construction Documents: Need detailed floor plans and elevation drawings. - 3D Renderings: Required alongside 2D drawings. Ideal Skills: - Expertise in residential drafting and construction documentation - Strong attention to detail and organization - Ability to interpret and execute design concepts accurately Please provide samples of previous work and estimated timelines.

I’m building a reliable, ongoing collaboration with a Revit specialist focused on architectural design. My workflow often starts with sketches or rough CAD plans that need to be turned into clean, well-structured Revit models. From there, I may ask for presentation-ready visuals or detailed sheets suitable for permitting and construction—so proficiency in 3D modeling, rendering, and full construction documentation inside Revit is essential. You should be comfortable setting up and maintaining organized BIM files, following naming standards, and pushing out quick iterations when feedback lands. Cloud collaboration through Autodesk tools is how I keep projects moving, so familiarity with shared coordinates, work-sharing, and linked models will help us stay in sync. This is not ...

I have a commercial building concept that now needs to be turned into a fully developed 3-D model in SketchUp. The brief calls for a highly detailed representation—interior and exterior, right down to furniture, fixtures, and finish selections—so that every space can be visualised and quantified. Your scope will cover: • Building the SketchUp file from my architectural drawings (PDF and DWG). • Populating all rooms with realistic furnishings and fixtures that match the plans and mood boards I will supply. • Setting up organised layers/tags and clean component naming so the file remains efficient and easy to navigate. • Generating rendered perspectives that clearly show materiality and spatial flow. • Extracting accurate quantity take-offs dir...

I'm seeking a skilled Revit expert to create a detailed model for a large modern custom home. Requirements: - Use of existing 2D plans - Detailed architectural and structural elements in Revit - Adherence to modern architectural style Ideal Skills and Experience: - Proficiency in Revit - Experience with large residential projects - Strong understanding of modern architectural design - Attention to detail and accuracy Please provide samples of previous work.

I have point-cloud scans of an existing facility and need complete Scan-to-BIM modeling in Revit. The scope covers: • HVAC, plumbing, and electrical systems • Architectural elements required for proper coordination I’m looking for Revit models delivered at LOD 300 for the general layout and LOD 350 where component detail and accurate fabrication data are essential. All geometry must align accurately with the scan, follow standard MEP families, and be organized with clear naming, worksets, and systems. Please include in your proposal: 1. A brief outline of your Scan-to-BIM workflow. 2. Examples of past Revit projects at LOD 300/350. 3. Estimated turnaround time for the first draft and final coordinated model. I will provide the registered point cloud and any available as...

I have point-cloud scans of an existing facility and need complete Scan-to-BIM modeling in Revit. The scope covers: • HVAC, plumbing, and electrical systems • Architectural elements required for proper coordination I’m looking for Revit models delivered at LOD 300 for the general layout and LOD 350 where component detail and accurate fabrication data are essential. All geometry must align accurately with the scan, follow standard MEP families, and be organized with clear naming, worksets, and systems. Please include in your proposal: 1. A brief outline of your Scan-to-BIM workflow. 2. Examples of past Revit projects at LOD 300/350. 3. Estimated turnaround time for the first draft and final coordinated model. I will provide the registered point cloud and any available as...

I have point-cloud scans of an existing facility and need complete Scan-to-BIM modeling in Revit. The scope covers: • HVAC, plumbing, and electrical systems • Architectural elements required for proper coordination I’m looking for Revit models delivered at LOD 300 for the general layout and LOD 350 where component detail and accurate fabrication data are essential. All geometry must align accurately with the scan, follow standard MEP families, and be organized with clear naming, worksets, and systems. Please include in your proposal: 1. A brief outline of your Scan-to-BIM workflow. 2. Examples of past Revit projects at LOD 300/350. 3. Estimated turnaround time for the first draft and final coordinated model. I will provide the registered point cloud and any available as...

I have point-cloud scans of an existing facility and need complete Scan-to-BIM modeling in Revit. The scope covers: • HVAC, plumbing, and electrical systems • Architectural elements required for proper coordination I’m looking for Revit models delivered at LOD 300 for the general layout and LOD 350 where component detail and accurate fabrication data are essential. All geometry must align accurately with the scan, follow standard MEP families, and be organized with clear naming, worksets, and systems. Please include in your proposal: 1. A brief outline of your Scan-to-BIM workflow. 2. Examples of past Revit projects at LOD 300/350. 3. Estimated turnaround time for the first draft and final coordinated model. I will provide the registered point cloud and any available as...

I have point-cloud scans of an existing facility and need complete Scan-to-BIM modeling in Revit. The scope covers: • HVAC, plumbing, and electrical systems • Architectural elements required for proper coordination I’m looking for Revit models delivered at LOD 300 for the general layout and LOD 350 where component detail and accurate fabrication data are essential. All geometry must align accurately with the scan, follow standard MEP families, and be organized with clear naming, worksets, and systems. Please include in your proposal: 1. A brief outline of your Scan-to-BIM workflow. 2. Examples of past Revit projects at LOD 300/350. 3. Estimated turnaround time for the first draft and final coordinated model. I will provide the registered point cloud and any available as...

I have a complete point-cloud survey of an existing PCH facility and now need it transformed into a reliable BIM model that captures all Mechanical, Electrical and Plumbing services. The scan data have already been indexed; what I am missing is an accurate Revit-based model that I can use for clash detection, future refurbishment planning and general coordination with other disciplines. You will start from the registered scan (e57 and RCP files are ready for download) and build the MEP systems so they align precisely with the reality of the building. Fabrication-level families are not essential, but dimensions, elevations and routing must be correct to the point cloud. Where information is unclear in the scan, flag it and I will provide site photos or clarification. Acceptance criteria &...

I am in the middle of a university BIM assignment—a straightforward single-dwelling house modeled in Revit—and I keep hitting roadblocks. My biggest pain points are getting the architectural elements set up cleanly (walls, floors, roofs, doors, windows) and then tying in the basic structural components so the model reads correctly in views, schedules, and sheets. What I need is patient, live, step-by-step guidance rather than someone handing me a finished file. I’m very much at the beginner stage, so explanations should stay simple, paced, and practical. Screen-sharing over Zoom, Google Meet, or Microsoft Teams works for me; interactive sessions where I can ask questions as we build would be ideal. Typical issues you’ll coach me through: • Correct famil...

I need a 3D SketchUp model of a hospital exterior(site). The model will be used for visualization and planning purposes. Requirements: - Accurate representation of hospital architecture - High-quality textures and materials - Surrounding landscape elements Ideal Skills: - Proficient in SketchUp - Experience with architectural modeling - Attention to detail and accuracy

I need an experienced Revit drafter to help me create detailed architectural drawings from scratch. This is a residential project that I am just starting. I am an architect. There is an existing house on the site, but it will likely be a tear down, hopefully using the existing foundation. The design will be modern. I'm bringing in a structural engineer later in the project. I/we will likely do the drafting for structural as well but that is TBD. Requirements for now: - Existing Floor plans - Existing Elevations - Existing Sections Ideal skills and experience: - Proficiency in Revit - Strong understanding of architectural design and drafting - Attention to detail - Ability to work independently and meet deadlines Please provide a portfolio showcasing similar work. Looking forward to...

I have existing scan data for a healthcare project (PCH) and need a clean, well-organized BIM model that focuses on the mechanical, electrical, and plumbing disciplines. The scans capture the as-built conditions; your task is to interpret that information and translate it into a coordinated Revit model ready for downstream use. I’m looking for Revit models delivered at LOD 300 for the general layout and LOD 350 where component detail and accurate fabrication data are essential. All geometry must align accurately with the scan, follow standard MEP families, and be organized with clear naming, worksets, and systems. make sure you have dynamo and revit licence

I have a fully measured, detailed floor plan for a medium-sized Australian home (3–4 bedrooms) and now need it converted into construction-ready documentation in Revit 2021 so I can lodge a Development Application with my local council in Victoria. Your task is to rebuild the plan faithfully in Revit 2021, apply all relevant Victorian drafting conventions, and produce a set of coordinated, dimensioned ground-floor plans suitable for the permit submission. I will provide the existing drawings in PDF/DWG along with site information; you translate them into a clean, parametric Revit model and create the sheets. Deliverables • Revit 2021 (.rvt) model with correct Australian families, levels, grids and annotations • PDF and DWG export of the detailed ground-floor...