Catia projectdela

Filtriraj

Moja nedavna iskanja
Filtriraj po:
Proračun
do
do
do
Vrsta
Znanja
Jeziki
    Delovno mesto
    2,000 catia project najdenih del, po cenah EUR

    For this project an experienced 3D-CAD Designer is needed to design one panel part with thePly-by-Ply method with CATIA V5-6R2018 CPD module (Composite Design). Then create a solid from the plies and finalize this solid in Part Design and/or GSD.

    €118 (Avg Bid)
    €118 Povprečna ponudba
    35 ponudb

    We need a transportation designer who knows the softwares like Alias, Catia , solid works , keyshots to design a product. The Free Lancer has to work in our company located at Chennai Ashok Nagar for 7 days.

    €305 (Avg Bid)
    €305 Povprečna ponudba
    10 ponudb

    I need a resource who knows tool design in Catia or AutoCad

    €29 (Avg Bid)
    €29 Povprečna ponudba
    38 ponudb

    ... We have already done 3D designing of friction or traction drive (both parts and assembly) together with drawings in Creo. But our dimensions of Traction drive have been changed due to requirements, so we have to change the dimensions in the already done CAD files or design. In the attachment I have attached the creo files of design and new dimensions requirements. Top design expert in Creo or Catia is required. You have to open CAD files in the software and change the dimensions of each part to new dimensions as given in the table in the picture file attached, After that you will assemble the parts with new dimensions and take drawing of both the parts and assembly from the CAD software with 3d pictures and properties table in a professional manner. Note: Assembly in simulatio...

    €40 (Avg Bid)
    €40 Povprečna ponudba
    19 ponudb

    Get the measurements of the file shown in Get the measurements of Like this lot of CAD work in this project.

    €11 / hr (Avg Bid)
    €11 / hr Povprečna ponudba
    33 ponudb

    I'm searching a mechanical designer with experience in automotive industry. Good knowledge of Catia V5.

    €26 / hr (Avg Bid)
    €26 / hr Povprečna ponudba
    61 ponudb
    CATIA Drawing Končano left

    I have been told to draw a gaming chair and to find the stress analysis.

    €102 (Avg Bid)
    €102 Povprečna ponudba
    24 ponudb
    CATIA support Končano left

    I need help in designing a model with the help of CATIA-V5.

    €10 / hr (Avg Bid)
    €10 / hr Povprečna ponudba
    37 ponudb
    CATIA modeling Končano left

    CATIA modeling mechanical engineer

    €17 / hr (Avg Bid)
    €17 / hr Povprečna ponudba
    73 ponudb

    • Develop CAD-Automation-Tools with VBA or VB.NET/ C# • Define best practices for Autodesk and design related topics • Support CAD-Training preparation and provide trainings • Provide Support for end users • Contribute to the development and support of CAD Applications like CATIA V5, Solidworks, NX etc. • Perform pre-implementation impact analysis and list functional risks associated with the selected architectural approach. • Collaborate with PLM and other Engineering Departments to develop solutions. • Advanced knowledge of Autodesk applications and its associated libraries and APIs. • Has worked with other CAD Software like AutoCAD, SolidWorks or NX • Good knowledge of COM objects • Good communication skills in Engl...

    €7 / hr (Avg Bid)
    €7 / hr Povprečna ponudba
    13 ponudb

    In Catia V5 I need a synchromesh manual transmission made as described in this video starting from 2:07 until the end of the video. The ONLY difference in what I need and what is shown in the video is I ONLY NEED 2 FORWARD GEARS AND 1 REVERSE 1.) I need 3D Catia V5 part models for all parts described from 2:07 onwards in the video. (,CATpart files) 2.) Once all parts are made they need to be assembled using Catia V5 assembly and capable of running an animation of the shaft moving and gears being shifted as described in the video. 3.) I need 2D drawings made of all the parts made using Catia V5 drafting fully dimensioned and toleranced. with the appropriate views for each part. 4.) I need a 2D drawing with orthographic multiviews of

    €757 (Avg Bid)
    €757 Povprečna ponudba
    9 ponudb

    Hello I’m a univers Student who currently doing a resit cw, my deadline in Monday morning so I need some help on the24th Sunday only for like an 1hour Basically I need to make a punch press and apply some kinamatics with it. Noting complex [Removed by Freelancer.com Admin for offsiting - please see Section 13 of our Terms and Conditions]

    €15 / hr (Avg Bid)
    €15 / hr Povprečna ponudba
    10 ponudb

    Dear all, we are looking for somebody who can help us to design special and all-purpose containers and carriers, mainly for automotive. The best would be somebody (but not limited to) who has exprience with similar products. Currently we need somebody who works in Catia. Please see our products on following website: .

    €953 (Avg Bid)
    €953 Povprečna ponudba
    52 ponudb

    I have a scan of handgrip with trigger, I need someone to take the .stl file and reverse engineer it into a CAD model, it does not have to super accurate but it should be a nice clean geometric aproximation, only bid if you have done a lot of reverse engineering of .stl files, beware the handgrip is not symetrical (even though it looks symetrical) i wil pay is $65, because i have catia v5 and can do it myself if it cost more that $65 !AhCUwSGw1-NEwjrbC7aBKkFyMA9a?e=ipIjXA

    €105 (Avg Bid)
    €105 Povprečna ponudba
    20 ponudb

    ...knowledge on design for manufacturing (DFM) and different manufacturing processes including machining, welding, injection molding etc. • Strong business expertise in engineering domains, advisor on design process, and on integration with authoring tools • Management of libraries and standard components • Master CAD part alignment (eBOM and CADBOM) Other Key areas of expertise • Knowledge of CATIA and/or NX • TCiC and/or NX Integration • NX Line designer is a plus Furthermore you convince through • Goal-oriented and independent way of working, analytical thinking skills • Good communication skills, confident appearance • Ability to work in a team, persuasiveness and assertiveness • Ability to effectively prioritize and ex...

    €573 (Avg Bid)
    €573 Povprečna ponudba
    12 ponudb

    Looking for experts in AUTOCAD, Catia, CREO, and Solid Works to make engineering drawings of Flow Control Valves and Brochure Designs.

    €236 (Avg Bid)
    €236 Povprečna ponudba
    68 ponudb

    This project is based on designing of engine inlet, which includes cone, fan blades, casing and the first stage of the inlet. it consists of 4 STL files. The output should be in the form of a solid 3D CAD model and the four single parts bodies should be assembled. Not all the time you get good STL file. Most of the files are scanned proper and while designing you could make few assumptions. The main idea behind designing this model is for simulations, so the main focus should be on the aerodynamic curve from cone to 1st stage elevation. On this point, I require deviation analysis between the STL file and 3D Cad model. Convert ASC, STL(point cloud file) SCAN to 3d solid CAD model(), - Tolerance should be 0.1mm-0.3mm. - Maintain smooth surfaces in solids. - CAD model() should

    €39 (Avg Bid)
    €39 Povprečna ponudba
    40 ponudb

    I want modeling in catia or solidwork resin sheet modeling (not sheet metal)

    €64 (Avg Bid)
    €64 Povprečna ponudba
    59 ponudb
    injection Mold Končano left

    I need a injection mold design in 2 piece on catia v5 or solidwork in step file

    €104 (Avg Bid)
    €104 Povprečna ponudba
    58 ponudb

    Using Catia v5 software do harvesting mechanism for Robotic design a 3D and assembly Demonstrate how design will work using the 3D CAD

    €31 (Avg Bid)
    €31 Povprečna ponudba
    37 ponudb

    We are working on High Altitude Shelter Project to provide shelter to people living in low temperatures.

    €294 (Avg Bid)
    €294 Povprečna ponudba
    9 ponudb

    We are working on a High Altitude shelter Project to provide shelters to people living in Low Temperatures.

    €248 (Avg Bid)
    €248 Povprečna ponudba
    15 ponudb

    MORE INFO WIL B SHARED IN CHAT

    min €28 / hr
    Zapečateno Pogodba o nerazkritju informacij
    min €28 / hr
    24 ponudb

    We need a team member for our automotive projects. The person we are going to work together need to have knowledge about sheetmetal, assembly, welding or/and vacuum forming experience. This is remote long term operation. There is a welded assembly group technical drawing at the attachment. That is perfect example for metal manufacturing. For surface operations, we will have b2b meetings.

    €4 / hr (Avg Bid)
    €4 / hr Povprečna ponudba
    27 ponudb

    I have an engineering idea of a device. To help you out design it, i know the functionality of the device and what it is supposed to accomplish. I will share the details after you get selected for the job. Here is what i expect to get from you. - a 3D engineering design (Catia V5 or solid works) preferably Catia. - Animated functionality of the device highly desirable. - Device will be sent for mass production at some level therefore a list of parts and all relative details are required. - exploded view of the device. - Other engineering calculations that might be required to design such as load and etc - The freelancer is supposed to be on top of his game and creative to assist in perfecting the design. Thanks

    €373 (Avg Bid)
    €373 Povprečna ponudba
    72 ponudb

    I need a trainer to teach Solidworks and CATIA completely as per the industrial applications. Preferable languages- telugu and English.

    €109 (Avg Bid)
    €109 Povprečna ponudba
    25 ponudb

    We are working on the design of Friction or Traction drive ( Toothless planetary gear) . We have already done its Matlab calculations and its design in Creo. But our dimensions of Traction drive are changed so we have to change the dimensions in both, the already done design and already done Matlab coding. In the attachment I have attached the Matlab file together with creo files ...We have already done its Matlab calculations and its design in Creo. But our dimensions of Traction drive are changed so we have to change the dimensions in both, the already done design and already done Matlab coding. In the attachment I have attached the Matlab file together with creo files of design and new dimensions requirements. Top expert in Matlab programing and design expert in Creo or Catia i...

    €167 (Avg Bid)
    €167 Povprečna ponudba
    16 ponudb
    Catia designing Končano left

    You are required to design and develop a standard four door saloon car front door Central Door Locking (CDL) latch. ➢Identify the current legislative requirements for a front door CDL latch. ➢Identify the latch sub-system specifications. ➢Perform calculations (manual or otherwise) to determine the operating forces of the claw / pawl spring(s) for a standard CDL front door latch. ➢Design and model the back-plate and the back-plate’s housing. ➢Develop the design/packaging in more detail to include the pawl, claw, inside handle and outside handle levers. ➢Apply DFM and DFA principles to your design, use appropriate sketches and discuss how you would manufacture the back-plate and housing. Evidence of engineering design with production intent and analysis is required here

    €148 (Avg Bid)
    €148 Povprečna ponudba
    18 ponudb

    Dynamic crash analysis results for a frame designed in CATIA I have the frame as STP , IGS , CATAI want the result of the frame when it gets an accident , hitting wall at high speed , maybe 50kh/hr ,or higher want screenshots of the result ( the crash simulation ) and report of the details like the speed of frame , time of crash Using ANSYS, ABAQUS or Solidworks

    €102 (Avg Bid)
    €102 Povprečna ponudba
    8 ponudb

    Design Optimised Bicycle Frame Design • Bicycle frame design and development. • CAD Modelling • Drafting on CAD software. • CAE analysis of bike frame members and weld design • Motor transmission casing design on CAD • Gear, Shaft, Bearing calculations • Proficient in CAD and reading engineering drawings (In Solidworks and CATIA). • Linear and non-linear finite element simulation (ABAQUS) • Knowledge of GD&T. • Experience of FMEA (Failure Mode Effects Analysis), Kaizen/A3 (continuous improvement and problem solving) process improvement and Poka Yoke (error proofing) techniques.

    €4150 (Avg Bid)
    €4150 Povprečna ponudba
    8 ponudb

    Hi, I need to make a simulation with 3 collaborative robots from Fanuc CR-35iA and line is for preparing windshields with sealant and rear view mirror. Simulation needs to be made in Catia, I will give you all file for simulation only you need in CAD. Please check the layout. I offer 50USD.

    €90 (Avg Bid)
    €90 Povprečna ponudba
    13 ponudb
    €19 Povprečna ponudba
    26 ponudb

    I am seeking 3D CAD model designer services. Specifically, I need my idea designed in the following fifile formats: STEP (.step/.stp), SolidWorks (.sldprt) Parasolid (.x_t, .x_b), Autodesk Inventor (.ipt), CATIA (.catpart), ProE (.prt), ACIS (.sat), and .stl Thank you for your consideration.

    €23 (Avg Bid)
    €23 Povprečna ponudba
    34 ponudb

    I am seeking 3D CAD model designer services. Specifically, I need my idea designed in the following fifile formats: STEP (.step/.stp), SolidWorks (.sldprt) Parasolid (.x_t, .x_b), Autodesk Inventor (.ipt), CATIA (.catpart), ProE (.prt), ACIS (.sat), and .stl Thank you for your consideration.

    €47 (Avg Bid)
    €47 Povprečna ponudba
    26 ponudb

    Use the Ansys software to simulate the 3D Catia designs using CFD to find the power and the torque

    €40 (Avg Bid)
    €40 Povprečna ponudba
    18 ponudb

    For a complex construction project which is being made for the first time in INDIA. Need to convert the architectual Rhino 3d file to Solidworks/Catia which needs to be used for CNC bending and cutting.

    €244 (Avg Bid)
    €244 Povprečna ponudba
    18 ponudb
    TATA NANO Končano left

    Dear Yash Jagtap, Surface flaws can be really annoying; however, they can be solved. I can do it for you for around three days. I will do this using CATIA surface design. CATIA is more powerful and precise in surface modeling than SolidWorks, yet they both belong to Dassault Systemes. Having checked the attached link, I found some manifolds and connexity problems, which can be solved by remodeling some surfaces. According to our chat, I am looking forward to implementing the project. Best regards, Shahrooz

    €6 (Avg Bid)
    €6 Povprečna ponudba
    1 ponudb

    Tomar modelos 3 D de Catia Composer y pasar a diagramas eléctricos y neumáticos para ser ledos por personal de ensamble en la producción con Corel Draw.

    €21 (Avg Bid)
    €21 Povprečna ponudba
    4 ponudb

    I am doing some practicing And I am stuck and I need help Here's an example

    €76 (Avg Bid)
    €76 Povprečna ponudba
    20 ponudb

    we want statistical modeling and detailed report on airless tyres using catia and anysis softwares .

    €77 (Avg Bid)
    €77 Povprečna ponudba
    13 ponudb

    This is an individual assignment whereby you have been tasked by the Racing team to design the front upright for an electric powered lightweight single seater race car. The race car features all-wheel drive and each wheel assembly has its own outboard mounted electric motor and epicyclic gearbox. The team are downsizing their wheels from 13” diameter to 10” diameter wheels and have chosen to use a commercially available 10” magnesium wheel to fit a Hoosier 18.0 X 7.5 -10 slick racing For the purposes of the assignment, CAD and a technical drawing of the OZ 10” Magnesium wheel is provided, the latter can be viewed online here. This will allow the accurate representation of the inside of the wheel and gives sufficient detail for the mounting face of the wheel hub. The...

    €251 (Avg Bid)
    €251 Povprečna ponudba
    11 ponudb
    Catia and solidwork Končano left

    I want to learn full catia and solidwork accordingly to the industrial aspects in Mechanical engineering. Such that I can able to draw any drawings and help full to my career growth.

    €90 (Avg Bid)
    €90 Povprečna ponudba
    10 ponudb

    I need to learn full solidwork and CATIA as per the

    €73 (Avg Bid)
    €73 Povprečna ponudba
    24 ponudb

    Hello, I made a project in CATIA. I need someone who can render the project in a 3D video with shaders, shadows and textures. (SEE THE VIDEO) I have the CATIA step files ready to convert into AutoCAD. I want the Machine in 3D with textures and shadows like the picture I included for sample. I will have recurrent project similar to this one to do. Budget is in between 30$ to 70$ per video.

    €26 (Avg Bid)
    €26 Povprečna ponudba
    5 ponudb

    Hello, I have a video made in CATIA with the .STP file ready to export. I am looking for a designer video for rendering a custom assembling and screwing machine with better shaders and texture. It should be a fast process. We have the CATIA files ready and the ready dimensions, movements and axes. The person recruited will be assigned to an engineer in order to complete the video. The machine are in the videos for previewing the conception.

    €109 (Avg Bid)
    €109 Povprečna ponudba
    17 ponudb
    CATIA-V5 expert Končano left

    I am looking for a Catia V5 expert. He / She should have expertise in solid modeling, surface modelling and drafting. And should have good knowledge about sheet metal products.

    €80 (Avg Bid)
    €80 Povprečna ponudba
    19 ponudb
    I need Catia expert Končano left

    Need to design and aircraft fuselage with given dimensions and other designs will be given for reference. Time given for designing is 6-9 days it's an easy design for intermediate and expert level of Catia user. Dimensions shall be given once the assignment has been taken

    €13 (Avg Bid)
    €13 Povprečna ponudba
    39 ponudb

    Need to pass some sketches of a 4WD Robot, to a 3D Mechanical working model in SOLIDWORKS/CATIA I give you some images with measures and the work is to Model in Solidworks/Catia Have in mind that the manufacturing will be done in Metal and the edges must be round whenever possible. Manufacturing must be economical Thanks

    €159 (Avg Bid)
    €159 Povprečna ponudba
    60 ponudb

    - Need 3d modelling of an kitchenware product - Modelling can be from AUTOCAD, SOLID WORKS, CATIA

    €64 (Avg Bid)
    €64 Povprečna ponudba
    44 ponudb
    AutoCAD design help Končano left

    I need suggestions and help with designing the autonomous car on Solidworks or Inventor. Catia is a plus. Someone who can help me design a battery for the car. FEM simulations and stress analysis required.

    €124 (Avg Bid)
    €124 Povprečna ponudba
    22 ponudb