Heat Transfer and CFD simulation of my part drawing preferable on 'simscale' online simulator, part was made on onshape.
₹1500-12500 INR
Plačilo ob prevzemu
My project includes experimental work in which i have to heat up a receiver unit of a parabolic dish at a high temperature in the range of 160-200 deg. C. The part is used to heat oil as it flows in the open to environment due to gravity (as fins of receiver are at an angle as shown in the attached file), oil flows on surface of top most fin goes through the hole at the end of the fins and process repeats for all the four fins and outlet hole is given in the bottom most fin to receive heated oil, assumptions are:
-laminar flow
-constant temperature throughout the receiver.
-soybean oil: density=920.3 kg/m3, specific heat= 1.974 KJ/kgK, thermal conductivity of oil (k)= 0.154 W/mK
dynamic viscosity= 0.0405 Pasec., water content in oil = 7% of oil mass.
-oil film thick is assumed to be = 2mm
-volumetric oil flow rate is very low= 10mL/sec.
here is link to my part on sim scale:
[login to view URL]
-
ID projekta: #26284258
Več o projektu
6 freelancerjev ponuja v povprečju za ₹8435 na tem delu
Hello I’m Mohamad saeed Cfd expert with high experience I have checked your job description and I’m ready to help you in your project
Hello, I am a mechanical graduate working as FEA engineer. I have checked all input files/details. I'd be very happy to discuss this further and get started for you as soon as possible. Technical skills: Analytical c Več
Greetings! I am an Aerospace Engineer with MS in Aerospace CFD (Computational Fluid Dynamics). I have an experience of 3 years working with Government and private organizations. I have studied Turbomachinery, Aero Ve Več
Hello I am a mechanical and aeronautical engineer with 5 years experience based on finite element method and CFD in aerospace industry. Currently I am working as a thermal engineer and have solid background on thermal Več
Hi, I'm interested in this project. I have 6 years of experience as a CFD Engineer. I had done one project in simscale. Have small experience in simscale. I usually use Ansys fluent. it will take just 2 days more to w Več