Engineers za najem v Turkey
Prikazanih 7 rezultatov
Sponzorirani freelancerji
-
I have worked on several projects in my working life. Especially in the area of industrial Automation ,I have worked on the Wastewater Treatment Plant and Water Treatment Plant Automation Project. I wrote the system software with the SIEMENS TIA Portal program and the Simatic Manager program according to the...I have worked on several projects in my working life. Especially in the area of industrial Automation ,I have worked on the Wastewater Treatment Plant and Water Treatment Plant Automation Project. I wrote the system software with the SIEMENS TIA Portal program and the Simatic Manager program according to the automation scenario and then I worked with the SIEMENS WinCC SCADA program to monitor and control the system. I used the SIEMENS PH & INFORMATION SERVER program to report the units on a monthly, monthly and yearly basis and prepared templates for the reports. I did (PTP) point to point tests and automation tests when the units were switched on. I drew the Electricity Projects with the E plan P8 V2.6 program. In the field of process automation, I used the DELTA PLC program and the ABB PLC program to control each piece of equipment in the factory. In Energy Automation, I also worked in HES projects where I made the generators PLC and SCADA system. Ventilation systems of plants and enterprises were made according to the temperature of the environment, according to the working information of the machines and according to other factors. Ventilation system entered the circuit and worked in a certain place. I usually used ABB AC500 PLC program and ABB & SIEMENS drivers when doing these systems. I install &Comission Chocolate Machines,lines.And test all equipment then commission about process follow. I used Honeywell DCS C200 in iron steel industry and I comissioned this systems about part by part units In the field of electricity, I work actively in the fields of electric panel works, electricity projects and field applications of small enterprises in general. I used OMRON PLC some factory application with given scenario I wrote plc to control each equipment and depend on sensor etc.. I set up on the field instruments, configuration upper and lower limit values during setup, setup analogue 4.20 mA, 0-10 V. I made work such as parameter setting of ABB & SIEMENS drivers and softstarters. In Machine Automation ,I have done projects like machine process Automation and writing software depositor and other part of machines and there I used AB PLC –RS Logix 5000 and Factory talk. manj
Najemi cesur135
-
Elektronika, Elektro inženiring, Oblikovanje tiskanih vezij v PBC, Oblikovanje tokokrogov, MikrokontrolerDearSir, My background is related with: -Digital Motor Control -Analog Design -Electronic Design -PowerElectronics -Renewable energy -PCB design -Embedded system -Matlab -Simulation of hardware For each concept descriptions are as follows: Digital Motor Control: -3-phase induction motor vector control drive -Flux...DearSir, My background is related with: -Digital Motor Control -Analog Design -Electronic Design -PowerElectronics -Renewable energy -PCB design -Embedded system -Matlab -Simulation of hardware For each concept descriptions are as follows: Digital Motor Control: -3-phase induction motor vector control drive -Flux estimation algoritm generation -DSP(TMS320) implementation on motor drive -Low speed application -Torque and speed loop generation -Control algoritms -BLDC motor -Step motor -DC motor Analog design -Low power distribution -Noissless special opamp based analog circuits -Analog filters -Orcad simulation of several circuits Electronic Design -RF transmitter and receiver -Bluetooh reade rand transmitter -Magneticreader PowerElectronics -Implementation motor drive -AC/DC converter -DC-DC converter -Battery charger -Solar inverter -Renewable Energy -Uninterruptle power supplies PCB design -Schematic design by Altium -PCB design by Altium -Power board design -SMPS board design -Easyeda -CAD files of manufacturers Embedded system -ESP32,ESP8266,modules -Bluetooth and Wifi -PIC18,PIC24,PIC30 and dsPIC applications -Ardino -MSP430 -Atmel -DSP(Texas Instruments) -Renesas -STM32 -C2000 Matlab -Power Electronics simulation -Motor drive -WindEnergy -Solar Energy -Control applications Simulation of Hardware -Orcad Simulation (TI,National, LinearTech, Maximlibraries) -LTI -National -Matlab -Easyeda manj
Najemi macroenergy
-
Hi, We're Mehraz Architects Group, and we offer a plethora of architectural and design services to all our clients from across the globe. A team of 3, we are a trio of designers and builders who boast years of experience along with high level education (Masters of Architecture, Bachelors of Civil Engineering, etc.)...Hi, We're Mehraz Architects Group, and we offer a plethora of architectural and design services to all our clients from across the globe. A team of 3, we are a trio of designers and builders who boast years of experience along with high level education (Masters of Architecture, Bachelors of Civil Engineering, etc.) to provide and perfect high-level projects. At Mehraz Architects, we can design any part of a build you could possibly need, including: o Exterior design, including landscape o Interior design of the building o Interior design of the space o Architectural blueprints and animations We pride ourselves not only on our immaculate work, but also constant availability (we can be reached via Freelancer.com 24/7), full availability on weekends, consistent punctuality, and our post-project services which allow us to ensure any issues or questions can be dealt with ASAP. We have the creative minds, but we need your projects to put them to work! manj
Najemi Sisibala35
-
Hello, we, as a structural engineer and architect, founded Engart Design. With the advantage of being from different professions, we examine your projects from every angle and produce the most reasonable solutions. Another point we would like to underline is that we highly value Building Information System and we...Hello, we, as a structural engineer and architect, founded Engart Design. With the advantage of being from different professions, we examine your projects from every angle and produce the most reasonable solutions. Another point we would like to underline is that we highly value Building Information System and we provide this special service in your projects as well. In this way, we are simultaneously building a bridge that is on the same plane from the aesthetic importance of your project to the construction costs. The most valuable thing for us is to literally create the structure of your dreams. For this reason, we will be in interactive communication with you during the construction process of the projects and we will choose even the smallest details with you. As Engart, we aim to support construction professionals in the projects we do. We support sales offices, contractors and architectural offices with 3D Rendering (3D realistic rendering). We create models that are completely suitable for the Bim system and make cost analyzes and original designs in line with your request. In addition, we offer innovative engineering solutions and architectural suggestions to bring your designs to life. The services we offer; -Architectural technical drawing -3D architectural models -3D animation -Mass design -Facade design -Innovative solutions -Quantity and cost calculations By Civil Engineer Berkay Gezer and Architect Ferruh Sarıgöl manj
Najemi engartdesigninfo
-
Inženiring letalske in vesoljske tehnologije, Aircraft Systems, Control Engineering, Control System Design, Deep LearningI am a aeronautical engineer who works on modelling and automatic control of unmanned aerial vehicle using classical methods and deep learningI am a aeronautical engineer who works on modelling and automatic control of unmanned aerial vehicle using classical methods and deep learning manj
Najemi MehmetcanKaymaz
-
I am an Electrical and Electronics Engineer with a strong proficiency in AutoCAD. Additionally, I am proficient in using various office programs. My passion for my profession and my experience guide me to successfully contribute to impactful projects.I am an Electrical and Electronics Engineer with a strong proficiency in AutoCAD. Additionally, I am proficient in using various office programs. My passion for my profession and my experience guide me to successfully contribute to impactful projects. manj
Najemi agit2946
-
I am an experienced Architectural visualizer and 3D Artist. I have extensive knowledge of architectural design, interior and exterior design, landscaping, rendering, animation and logo design. I have been working in this industry for eighteen years. I use professional programs such as AutoCAD, 3d max, Sketchup, Vray,...I am an experienced Architectural visualizer and 3D Artist. I have extensive knowledge of architectural design, interior and exterior design, landscaping, rendering, animation and logo design. I have been working in this industry for eighteen years. I use professional programs such as AutoCAD, 3d max, Sketchup, Vray, corona, KeyShot, Felix rendering, adobe illustrator ,Photoshop and Lumion at an expert level. Architecture is my passion. I always try to give you the best results with the work I do. I work devotedly and professionally to keep customer satisfaction at the highest level. manj
Najemi axelcoolsoft