Electronics Engineers za najem

  • Elektronika
Predlogi:
več

Države

Specifična lokacija

Izpiti

Urna postavka (USD)

Ocene

Na voljo

Showing 128 results
  • Najemi Euroaccount

    Euroaccount

    Russian Federation $50 USD / hour
    Mechanical Engineer, Electrical Engineer
    Russian Federation
    7.2
    20 mnenj $50 USD na uro
    I graduated from Moscow Technical University with Master degree. I have rich and strong experience in MECHANICAL - 3D modeling, 3D rendering, 3D design using AutoCAD and Solidworks - Finite Element Analysis and CFD using ANSYS and ABAQUS - Numerical Calculation and Simulation using Matlab - Dynamics Analysis using...
    I graduated from Moscow Technical University with Master degree. I have rich and strong experience in MECHANICAL - 3D modeling, 3D rendering, 3D design using AutoCAD and Solidworks - Finite Element Analysis and CFD using ANSYS and ABAQUS - Numerical Calculation and Simulation using Matlab - Dynamics Analysis using Adams, Nastran, Patran HARDWARE - Schematic Digital, Analog, Power electronics. - PCB layout, routing and assembly using Altium designer, Eagle CAD, Allegro, CADSTAR, PADS, Protel99.. - Product design and mechanical design in Solidworks. manj
  • Najemi JunrayFreelancer

    JunrayFreelancer

    Philippines $40 USD / hour
    Graphics Designer , Video Editor & Music Producer
    Philippines
    3.7
    1 ocena $40 USD na uro
    I am a FULL TIME Video Editor Graphics Designer at the same time Music Producer, i have more than 7 years of experience in editing. "Quality is my Priority" -Graphic Design - Producer -Logo Design - Remixing Music -Photoshop - Animations -Illustrator ...
    I am a FULL TIME Video Editor Graphics Designer at the same time Music Producer, i have more than 7 years of experience in editing. "Quality is my Priority" -Graphic Design - Producer -Logo Design - Remixing Music -Photoshop - Animations -Illustrator - Remove Backgrounds -Photoshop Design - Beat Maker -Flyer Design -Brochure Design -Website Design -Audio Services -Video Services -After Effects -Photo Editing -T-Shirts -Advertisement Design -Video Production -Video Editing manj
  • Najemi jokanies

    jokanies

    Belgium $50 USD / hour
    Embedded System | Multimedia Expert
    Belgium
    6.1
    4 mnenj $50 USD na uro
    Hello! I have rich experiences in IoT/Bluetooth/Multimedia devices and iOS/Android/Windows/ Linux/MacOS app development, especially in the field of Wireless and Multimedia communication. My specialties are: • IoT prototyping • BLE/WiFi/LoRa/GPS communication • Firmware development/PCB Design • Embedded Linux •...
    Hello! I have rich experiences in IoT/Bluetooth/Multimedia devices and iOS/Android/Windows/ Linux/MacOS app development, especially in the field of Wireless and Multimedia communication. My specialties are: • IoT prototyping • BLE/WiFi/LoRa/GPS communication • Firmware development/PCB Design • Embedded Linux • Video/Audio encoding/streaming/transcoding My experiences are: • Bluetooth: nRF51822, nRF52832, nRF52840, DA14580, DA14583, DA14585, CC2541, CC2640, BLE112, BGM113, CSR8670 • Wi-Fi: ESP8266, ESP32 • MCU: PIC, ATMel, STM32, Raspberry pi • Video/Audio Processor: Hi3516, Hi3518, Hi3519, VS1063, VS1005, ADSP, ADAU, SAM3816, SAM5704 • App: iOS/Android Bluetooth App, Video Encoding/Transcoding/Streaming • Video Codec: H.264/AVC, H.265/HEVC, VP8/VP9, MPEG2/MPEG4, VC1/WMV3 • Audio Codec: MPEG Audio, MP3, AAC, AC3, DTS, OGG • Protocol: RTP, RTSP, RTMP, MMS, MPEG DASH, HLS, SIP, SDP • Open Source: FFmpeg, VLC, x264, x265, Live555, OpenCV manj
  • Najemi amrlsayed

    amrlsayed

    Egypt $10 USD / hour
    IoT Software Developer, Embedded Systems Engineer
    Egypt
    4.0
    3 mnenj $10 USD na uro
    I am the founder of The-DIY-Life, an R&D company in the Field of Internet of Things. I am a Leader of a professional developers Team, working on the field of IoT and Embedded Systems. Our Company has several "modules on shelf" to reuse on our projects. we care more about the quality of the project we work on than the...
    I am the founder of The-DIY-Life, an R&D company in the Field of Internet of Things. I am a Leader of a professional developers Team, working on the field of IoT and Embedded Systems. Our Company has several "modules on shelf" to reuse on our projects. we care more about the quality of the project we work on than the quantity of the projects. so we invest time on documentation and version control system using Git. We use freelancer.com as a business platform to know more clients, and feature our work. Despite we support the opensource software, and we have several opensource work on our page on Github, we also respect the privacy of our clients work. manj
  • Najemi MeddahAbdellah

    MeddahAbdellah

    Algeria $25 USD / hour
    Electronics Engineer, App/web developer
    Algeria
    5.9
    6 mnenj $25 USD na uro
    I am an Electronics Engineer, specialized on the Internet Of Things and networking. I master microcontroller programming. Boards and microcontrollers I have experience with: -PIC. -ARM. -Arduino. -NXP development boards. -Raspberry Pi. -STM32 development boards. -ESP development boards. I am also a web/App...
    I am an Electronics Engineer, specialized on the Internet Of Things and networking. I master microcontroller programming. Boards and microcontrollers I have experience with: -PIC. -ARM. -Arduino. -NXP development boards. -Raspberry Pi. -STM32 development boards. -ESP development boards. I am also a web/App developer, programming languages I master : -C. -C++. -python. -Node.js. -PHP. -CSS/HTML. -javascript (JQuery, AngularJS). -QML. I work with these frameworks to develop hybrid apps (Cordova, PhoneGap build, Ionic) manj
  • Najemi trailblazer42

    trailblazer42

    Bosnia and Herzegovina $20 USD / hour
    Circuit and PCB designer from Europe
    Bosnia and Herzegovina
    6.0
    45 mnenj $20 USD na uro
    I love PCB layout, critical part positioning and everything that goes into my job description. Quality and efficiency are my best associates. With the right amount of research I'm sure I can tackle any kind of board. Also I offer my knowledge to clients so we can do even more. I can provide up to three minor...
    I love PCB layout, critical part positioning and everything that goes into my job description. Quality and efficiency are my best associates. With the right amount of research I'm sure I can tackle any kind of board. Also I offer my knowledge to clients so we can do even more. I can provide up to three minor revisions for free in the reasonable time frame. I'm experienced in: Hardware and PCB design Circuit schematics High speed design PCB HDI designs, via in pad Impedance matching multilayer PCB MCU boards IoT Device design Bluetooth, WiFi, RF, NFC, RFID Breakout boards, shields of any kind Programs and tools: KiCad, Eagle, EasyEDA, DesignSpark, PADS logic and layout viewer manj
  • Najemi smartman7102

    smartman7102

    China $25 USD / hour
    Hardware & Firmware developer Automation Engineer
    China
    5.5
    12 mnenj $25 USD na uro
    Thank you for your kindly visiting to my summary. Control engineering & Electronics Expert, abundant experience in practical design and development of embedded systems for 8+ years. -- PCB design/manufacturing using Altium Designer and Eagle -Bluetooth and WiFi app & firmware development ESP8266&HC-05&ESP32 and...
    Thank you for your kindly visiting to my summary. Control engineering & Electronics Expert, abundant experience in practical design and development of embedded systems for 8+ years. -- PCB design/manufacturing using Altium Designer and Eagle -Bluetooth and WiFi app & firmware development ESP8266&HC-05&ESP32 and Arduino&Atemga&PIC&SAM&ARM&DSP - Robot & Motor Controlling -Matlab and Mathematics -Vehicle Tracking using GPS and Accelerometer. -Signal processing based on FPGA and DSP - Sensor Application field such as Temperature, Light, IR,Pressure,etc -Control Engineering -Power Electronics -Electrical Engineering -PLC & SCADA -Microcontroller -Embedded Software -Software Development -Artificial Intelligence(GA, IA, NN, Fuzzy Logic, PSO, etc.) -Proteus => Design & Simulink & PCB Development tools: IAR,Keil,MPLAB-X,Micro C,Quartus,Arduino IDE,CCS, Atmel Studio, etc. Choose me and let's establish a long term relationship!!! manj
  • Najemi mos3d

    mos3d

    Egypt $25 USD / hour
    Arduino/Raspberry pi/Embedded/IOT/Mobile APP/Web
    Egypt
    5.9
    33 mnenj $25 USD na uro
    With over 6 years of experience under my belt , i am the PERFECT contractor for your project. if you're looking for high quality work from a person specialist in embedded systems , hardware prototyping , Robotics and digital design , then i am the person you need to work with. My field of professionalism includes...
    With over 6 years of experience under my belt , i am the PERFECT contractor for your project. if you're looking for high quality work from a person specialist in embedded systems , hardware prototyping , Robotics and digital design , then i am the person you need to work with. My field of professionalism includes : 1-Micro-controllers with variant types like (Pic ,ARM, AVR , 8051) 2- development kits (Arduino, Mbed,Raspberry pi ) 3- Digtal design and Verification using (VHDL, Verilog and system Verilog) 4-FPGA prototyping using (Xillinx and Altera) FPGAs as well as 5-electronics hardware implementation 6-PCB design. 7- Programming languages: Python, C/C++, JavaScript, HTML, CSS. 8- Sensing : Wired(I2C, SPI, CAN, Modbus, MQTT, RS232/485, SNMP), Wireless(WiFi, BLE, RF, Xbee) sensor managements with Raspberry Pi/Arduino. I'm always committed with time and specifications for the required jobs and care about quality of delivered work manj
  • Najemi vtlabs

    vtlabs

    Zimbabwe $25 USD / hour
    Complete Embedded Systems Engineer
    Zimbabwe
    5.9
    27 mnenj $25 USD na uro
    I have 4 years experience developing Embedded applications using C++, C and assembly. I can program the following MCUs/MPUs: 1. PIC16,18,24 and PIC32 uisng MikroC and MPLabX. 2. AVR, ARM, SAM and STM32 using MikroC, Atmel studio with ASF, Atollic or Keil C 3. NRF and ESP microcontrollers on NRF SDK, ESP SDK or on...
    I have 4 years experience developing Embedded applications using C++, C and assembly. I can program the following MCUs/MPUs: 1. PIC16,18,24 and PIC32 uisng MikroC and MPLabX. 2. AVR, ARM, SAM and STM32 using MikroC, Atmel studio with ASF, Atollic or Keil C 3. NRF and ESP microcontrollers on NRF SDK, ESP SDK or on the Arduino IDE. 4. All Arduino Boards and I have experience with the AVR, SAM boards, NodeMCU, ESP32, NRF52480, uC32, Wi-FIRE etc. I can design Circuits and PCBs using the following software: 1. Altium Designer 2. Eagle Premium 3. Proteus 4. KiCAD I'm also an instrumentation Engineer with these skills: 1. PLC programming of ABB, Siemens, Omron or Direct Logic PLCs 2. SCADA development on Indusoft Web studio, Pulse or RS View 32 Works. 3. Electrical wiring diagrams on Autocad Electrical. 4. 2D and 3D CAD drawings on Autocad or Solid works. I'm also a Software developer for PC and Web. manj
  • Najemi BKTechnology

    BKTechnology

    Vietnam $25 USD / hour
    Hardware|Firmware|App|Mechanical|Prototypes
    Vietnam
    6.5
    21 mnenj $25 USD na uro
    ***** GIVE ME 50% YOUR TRUSTING , I WILL GIVE BACK 100 % SATISFACTION ***** We are a design team with 3 groups: System Design, Layout PCB & Mechanical. We have +15 years experience of Developing custom electronics, Hardware Design, Firmware, App and +7 years experience of 3D Mechanical (Enclosure, Case, Box...). Our...
    ***** GIVE ME 50% YOUR TRUSTING , I WILL GIVE BACK 100 % SATISFACTION ***** We are a design team with 3 groups: System Design, Layout PCB & Mechanical. We have +15 years experience of Developing custom electronics, Hardware Design, Firmware, App and +7 years experience of 3D Mechanical (Enclosure, Case, Box...). Our key skills are IoT, Embedded, Digital & Analog, High-speed, Memory, WIFI, GPRS, GPS, RF, BLE... We have designed up to +24 layers PCB. Experience designing high density boards include FPGA, EMCC, DDRx, PCIEx, SATA, ETH, BLE, WIFI, HDMI, USB, QSFP, LVDS...etc. Also, we provide FAB, ASSEMBLY & TESTING services. We can make any prototypes, even support mass production. We provide Service & Support even after completion of the projects. "We are ready to give you the best" Kind regards! BK Tech manj

Živjo , tukaj je nekaj freelancerjev zunaj omrežja

Živjo , tukaj je nekaj freelancerjev ki se ujemajo ""