ne sledite
Napaka pri sledenju uporabnika.
Ta uporabnik drugim uporabnikom ne dovoli, da mu sledijo.
Temu uporabniku že sledite.
Vaš paket članstva omogoča samo 0 sledenj. Nadgradite tukaj.
Sledenje je bilo uspešno preklicano
Napaka pri preklicu sledenja uporabnika.
Uspešno ste priporočili
Napaka pri priporočanju uporabnika.
Nekaj je šlo narobe. Osvežite stran in poskusite znova.
E-naslov uspešno verificiran.
sydney,
australia
Trenutno je 5:45 dop. tukaj
Datum pridružitve september 19, 2011
7 Recommendations
Ramy Helmy Kamel B.
@ramyhelmy
7,3
7,3
92%
92%
sydney,
australia
98 %
Opravljeno delo
98 %
V okviru proračuna
100 %
Pravočasno
17 %
Stopnja ponovnega najema
Chartered Mechanical Engineer (CPEng , NER , RPEQ)
Stopite v stik s/z Ramy Helmy Kamel B. glede vašega dela
Prijavite se, da se o podrobnostih pogovorite v klepetu.
Portfelj
Portfelj
tilt table that can carry 1 ton
Design Report for valve body
20 feet trailer design
Impact test Finite Element Analysis
Non Linear Finite element analysis
Walk through Complete Bus Frame
tilt table that can carry 1 ton
Design Report for valve body
20 feet trailer design
Impact test Finite Element Analysis
Non Linear Finite element analysis
Walk through Complete Bus Frame
Ocene
Spremembe shranjene
Prikazanih je1 - 5 od 50+ ocen
$250,00 AUD
CAD/CAM
Building Architecture
Civil Engineering
Structural Engineering
AutoCAD
T
•
$1.540,00 AUD
CAD/CAM
Solidworks
Mechanical Engineering
AutoCAD
3D Modelling
+1 več
G
•
$1.100,00 AUD
Engineering
CAD/CAM
Solidworks
Mechanical Engineering
AutoCAD
C
•
£500,00 GBP
Building Architecture
Home Design
Civil Engineering
Structural Engineering
AutoCAD
K
•
$500,00 USD
CAD/CAM
Solidworks
AutoCAD
3D Modelling
Drafting
•
Izkušnje
Principle Engineer
jan. 2022 - Trenutno
Self employed engineer offering mechanical engineering services
Mechanical Design Engineer
okt. 2021 - jan. 2022 (3 meseci, 1 dan)
• Machine design, CAD, and Finite element analysis projects.
• Design Structures and platforms for the required recycling plants
• Complete work with 12 clients (long term) based on my output work.
• Managing a team of mechanical engineers and mechatronic engineers to complete large-scale projects.
• Steel structural design.
Mecahnical Design Engineer
feb. 2019 - okt. 2021 (2 leti, 8 mesecev)
1- Mechanical design for industrial platforms, pontoons
2- Structure design
3- FEA and calculations
4- following up on manufacturing progress
Izobrazba
P.hD in Mechanical Engineering
(6 let)
Master Degree in Mechanical Engineering
(4 leta)
B.Sc. in Automotive Engineering
(5 let)
Kvalifikacije
RPEQ
Board of Professional Engineers of Queensland
2021
Registered Professional Engineer in Queensland
NER
Engineers Australia
2018
Nationa Engineering Registration
CPEng
Engineers Australia
2020
Chartered Proffisional Engineer
Publikacije
Closed Section Steel Tubes Axial Crushing and Energy Absorption Behavior
IJERT
This paper presents the effect of design parameters on crushing behavior and energy absorption of steel tubes used in bus frame manufacturing. Experimental investigations were carried out on different cross sections steel tubes subjected to axial impact load. Experimental tests were repeated on three sets of previously mentioned tubes, dents and holes were added to tubes to evaluate its effect on energy absorbed by those tubes.
Effect of Transverse Load on Energy Absorption of a Vehicle Frame During Accident
IJERT
A finite element model was introduced to simulate the experimental data of an axially loaded column subjected to a transverse load. The model was validated and proved to be in good correlation with the experimental results. The model was further used to investigate the effect of applying a transverse load on axially loaded members of a vehicle frame.
EFFECTS OF THE TYPE OF JOINTS BETWEEN THE LONGITUDINAL AND CROSS MEMBERS ON THE RIGIDITY OF THE COMMERCIAL VEHICLES CHASSIS FRAME
Scientific journal,Faculty of Engineering,Ain Shams University
This research is dedicated to the study of the effect of the type of joint fastening between longitudinal and cross members on the rigidity of the chassis frame.
A model of one joint of the chassis frame, between the longitudinal and cross
members was constructed to carry out the laboratory experiments where the load was increased in steps and the resulting deflections were measured in the case of using high tensile bolts or using hot rivets.
Stopite v stik s/z Ramy Helmy Kamel B. glede vašega dela
Prijavite se, da se o podrobnostih pogovorite v klepetu.
Verifikacije
Certifikacije
Top spretnosti
Brskajte med podobnimi freelancerji
Brskajte med podobnimi izložbami
Vabilo uspešno poslano!
Hvala! Po e-pošti smo vam poslali povezavo za prevzem brezplačnega dobropisa.
Pri pošiljanju vašega e-sporočila je šlo nekaj narobe. Poskusite znova.
Kopiranje v odložišče ni uspelo, poskusite znova po spremembi vaših dovoljenj.
Skopirano v odložišče.
Nalaganje predogleda
Geolociranje je bilo dovoljeno.
Vaša prijavna seja je potekla, zato ste bili odjavljeni. Prosimo, da se znova prijavite.