Freelancer logotipKako delujePrebrskaj dela
Prijava Vpis
Objavi projekt
Fotografija naslovnice profila
ne sledite
Napaka pri sledenju uporabnika.
Ta uporabnik drugim uporabnikom ne dovoli, da mu sledijo.
Temu uporabniku že sledite.
Vaš paket članstva omogoča samo 0 sledenj. Nadgradite tukaj.
Sledenje je bilo uspešno preklicano
Napaka pri preklicu sledenja uporabnika.
Uspešno ste priporočili
Napaka pri priporočanju uporabnika.
Nekaj je šlo narobe. Osvežite stran in poskusite znova.
E-naslov uspešno verificiran.
Avatar uporabnika
$100 USD/uro
Zastava AUSTRALIA
sydney, australia
$100 USD/uro
Trenutno je 4:06 pop. tukaj
Datum pridružitve maj 15, 2014
0 Priporočila

Gavin S.

@BlackBoxEng

 0,0 (0 ocen)
0,0
0,0
0%
0%
$100 USD/uro
Zastava AUSTRALIA
sydney, australia
$100 USD/uro
Ni relevantno
Opravljeno delo
Ni relevantno
V okviru proračuna
Ni relevantno
Pravočasno
Ni relevantno
Stopnja ponovnega najema

Engineering services, consulting and 3D CAD design

We provide engineering services and consulting in the areas of mechanical & electrical engineering, robotics & automation, embedded systems and 3D CAD. We specialise in bringing ideas from design, through prototype and on to finished product. You can have confidence that your project will be handled by a fully qualified and experienced engineer.
Freelancer C Programmers Australia
Glej vse C Programmers v Australia

Stopite v stik s/z Gavin S. glede vašega dela

Prijavite se, da se o podrobnostih pogovorite v klepetu.

Portfelj

1273767
Here is a sample of a few different mobile robotics projects completed for various clients.
A few different robot designs
Here is a sample of a few different mobile robotics projects completed for various clients.
A few different robot designs
Here is a sample of a few different mobile robotics projects completed for various clients.
A few different robot designs
Here is a sample of a few different mobile robotics projects completed for various clients.
A few different robot designs
Here is a sample of a few different mobile robotics projects completed for various clients.
A few different robot designs
1273760
This was a custom designed, short-arc, rotary voice-coil actuator that was developed as part of a stabilised camera system project.
Custom rotary voic-coil actuator
1273759
These are some of the various charging circuits for use with LiPo and LiIon batteries that we developed for a client of ours, Remote Labs at the University of Technology, Sydney
Intelligent LiPo / LiIon charging circuits
These are some of the various charging circuits for use with LiPo and LiIon batteries that we developed for a client of ours, Remote Labs at the University of Technology, Sydney
Intelligent LiPo / LiIon charging circuits
1273751
This was a simple PCB with various display components such as seven segment displays and LED's for use with an online FPGA training rig.
Simple display PCB
This was a simple PCB with various display components such as seven segment displays and LED's for use with an online FPGA training rig.
Simple display PCB
1273742
This was a research and design project to develop an early prototype for a robotic joint that could operate in either a locked or passively compliant mode.
Experimental robotic joint design
This was a research and design project to develop an early prototype for a robotic joint that could operate in either a locked or passively compliant mode.
Experimental robotic joint design
This was a research and design project to develop an early prototype for a robotic joint that could operate in either a locked or passively compliant mode.
Experimental robotic joint design
1273732
This was one of the concept renders for a control panel that would be used to control a stabilised camera system
Control panel concept
This was one of the concept renders for a control panel that would be used to control a stabilised camera system
Control panel concept
1273767
Here is a sample of a few different mobile robotics projects completed for various clients.
A few different robot designs
Here is a sample of a few different mobile robotics projects completed for various clients.
A few different robot designs
Here is a sample of a few different mobile robotics projects completed for various clients.
A few different robot designs
Here is a sample of a few different mobile robotics projects completed for various clients.
A few different robot designs
Here is a sample of a few different mobile robotics projects completed for various clients.
A few different robot designs
1273760
This was a custom designed, short-arc, rotary voice-coil actuator that was developed as part of a stabilised camera system project.
Custom rotary voic-coil actuator
1273759
These are some of the various charging circuits for use with LiPo and LiIon batteries that we developed for a client of ours, Remote Labs at the University of Technology, Sydney
Intelligent LiPo / LiIon charging circuits
These are some of the various charging circuits for use with LiPo and LiIon batteries that we developed for a client of ours, Remote Labs at the University of Technology, Sydney
Intelligent LiPo / LiIon charging circuits
1273751
This was a simple PCB with various display components such as seven segment displays and LED's for use with an online FPGA training rig.
Simple display PCB
This was a simple PCB with various display components such as seven segment displays and LED's for use with an online FPGA training rig.
Simple display PCB
1273742
This was a research and design project to develop an early prototype for a robotic joint that could operate in either a locked or passively compliant mode.
Experimental robotic joint design
This was a research and design project to develop an early prototype for a robotic joint that could operate in either a locked or passively compliant mode.
Experimental robotic joint design
This was a research and design project to develop an early prototype for a robotic joint that could operate in either a locked or passively compliant mode.
Experimental robotic joint design
1273732
This was one of the concept renders for a control panel that would be used to control a stabilised camera system
Control panel concept
This was one of the concept renders for a control panel that would be used to control a stabilised camera system
Control panel concept

Ocene

Spremembe shranjene
Tukaj ni nobenih ocen!

Izkušnje

Founder & Senior Mechatronics Engineer

Black Box Engineering
jan. 2013 - Trenutno
After gaining experience at several engineering companies, mostly in mechanical design and systems integration I decided to start my own enterprise and Black Box Engineering was born. With a focus on bringing our clients ideas through the difficult prototyping stages and on to product using a quality based approach to engineering, Black Box Engineering's success has grown with that of our clients.

Izobrazba

Master of Engineering

University of Technology, Sydney, Australia 2011 - 2012
(1 leto)

Diploma in Engineering Practice

University of Technology, Sydney, Australia 2004 - 2010
(6 let)

Bachelor of Engineering in Mechanical and Mechatronic Engineering

University of Technology, Sydney, Australia 2004 - 2010
(6 let)

Kvalifikacije

Certified Solidworks Professional

Dassault Systèmes
2014
A Certified SolidWorks Professional is an individual who has successfully passed our advanced skills examination. Each CSWP has proven their ability to design and analyze parametric parts and moveable assemblies using a variety of complex features in SolidWorks software.

Certified Solidworks Associate

Dassault Systèmes
2014
The CSWA certification is proof of your SolidWorks® expertise with cutting-edge skills that businesses seek out and reward.

Publikacije

-

-
-

Stopite v stik s/z Gavin S. glede vašega dela

Prijavite se, da se o podrobnostih pogovorite v klepetu.

Verifikacije

Prednostni Freelancer
Identiteta verificirana
Plačilo verificirano
Telefon verificiran
Email verificiran
Povezano s Facebookom

Certifikacije

numeracy_1.png Basic Numeracy 1 100%
uk_english1.png UK English 1 83%

Top spretnosti

C Programming
Engineering
Electronics
Product Sourcing
CAD/CAM

Brskajte med podobnimi freelancerji

C Programmers in Australia
C Programmers
Engineers
Electronics Engineers

Brskajte med podobnimi izložbami

C Programming
Engineering
Electronics
Product Sourcing
Prejšnji uporabnik Naslednji uporabnik
Vabilo uspešno poslano!
Hvala! Po e-pošti smo vam poslali povezavo za prevzem brezplačnega dobropisa.
Pri pošiljanju vašega e-sporočila je šlo nekaj narobe. Poskusite znova.
Freelancer logotip Slovenia / Slovenščina Pomoč & Podpora FreelancerKategorijeProjektiNatečajiFreelancerjiPodjetjaČlanstvoProgram prednostnih freelancerjevProjektno vodenjeLokalna delaPhoto AnywhereIzložbaAPI za razvijalceVerificirajte seNamizna aplikacija O temO nasKako delujeVarnostVlagateljiZemljevid spletiščaZgodbeNoviceEkipaNagradeIzjave za javnostKariere PogojiPolitika zasebnostiPogojiPolitika o avtorskih pravicahKodeks ravnanjaProvizije in stroškiPartnerjiEscrow.comLoadshiftWarrior Forum AplikacijeLogotip Apple App StoreGoogle play logotip
Kopiranje v odložišče ni uspelo, poskusite znova po spremembi vaših dovoljenj.
Skopirano v odložišče.
Registrirani uporabniki Skupaj objavljenih del
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Nalaganje predogleda
Geolociranje je bilo dovoljeno.
Vaša prijavna seja je potekla, zato ste bili odjavljeni. Prosimo, da se znova prijavite.