Optical Engineer for Imaging System Design

Zaprto Objavljeno pred 2 tednoma/tedni Plačilo ob prevzemu
Zaprto Plačilo ob prevzemu

I need an experienced optical engineer to help design an imaging system primarily intended for lithography. The tasks that I expect the freelancer to perform include:

I am building a projector to expose a photosensitive-coated target with UV light. This projector must have an adjustable image output that varies from 0.1 reduction [image source to target image] down to about 0.02 reduction. At all image reduction settings, the focus must be adjustable.

The input image will vary from about 5mm to 1mm, and the output image will be from 1.5mm to 0.25mm. The light source will be LED, outputting 50 watts of mid-UV light.

The output of this gig shall be a drawing/sketch of the relative positions of each optical element in relation to the light source [UV light], the source image/film, and the target. For each optical element, there shall be a full description/specification, and if possible, at least one source to buy the element. I do not need any mechanical design, only a drawing showing the relative positions of everything.

Elektronika Oblikovanje izdelka Elektro inženiring Strojni inženiring Inženiring

ID projekta: #38062813

Več o projektu

8 predlogov Oddaljen projekt Aktiven pred 2 tednoma/tedni

8 freelancerjev ponuja v povprečju za $130 na tem delu

azraazeen9

Hello, i am ready exited to work you as i read your job description Optical Engineer for Imaging System Design I am also an expert in making 2d,3d modelling and animating characters 2dautocad drawing ,elevation, solid Več

$140 USD v 3 dneh
(37 ocen)
6.1
fayyazs789

Hi there

$150 USD v 5 dneh
(8 ocen)
5.1
anahabibi

Hi, as a professional mechanical engineer with expertise in optics and a proven track record of designing complex imaging systems, I will deliver the results you’re looking for. I’ll deliver a comprehensive drawing det Več

$140 USD v 7 dneh
(3 ocen)
2.2
LetsDezign

Morning, I have seen your project "Optical Engineer for Imaging System Design" and have seen your description that "I need an experienced optical engineer to help design an imaging system primarily intended for litho.. Več

$80 USD v 3 dneh
(0 ocen)
0.0
CustomIDEAS

Hiya, would like to discuss your project Optical Engineer for Imaging System Design in detail,i have gone through your description that "I need an experienced optical engineer to help design an imaging system primaril Več

$130 USD v 3 dneh
(0 ocen)
0.0
ajeshjanardanan

Hi , How are you doing? As a professional mechanical and civil expert with expertise inEngineering, Mechanical Engineering, Electrical Engineering, Product Design and Electronics, I eagerly anticipate the opportunity t Več

$50 USD v 4 dneh
(0 ocen)
0.0