Design pulse transformer 44 KV 0.5 J Capacitive primary into capacitive secondary

V teku Objavljeno pred 5 mesecema/meseci Plačilo ob prevzemu
V teku Plačilo ob prevzemu

I am looking for a skilled engineer to design a pulse transformer for my project. The transformer needs to have the following specifications:

Energy Transfer:

- Desired energy transfer is 0.5 J

Primary Purpose:

- The primary purpose of the transformer is to provide power supply

Size Constraints:

- There are no size constraints for the transformer

Ideal Skills and Experience:

- Strong background in transformer design

- Knowledge of high voltage systems

- Experience with capacitive loads on primary and secondary designs.

-Based on my work so far, it is defnitely a gapped, wide band material such as Magnetics Inc type W toroid material ZW-43806-TC gapped to 0.030" then a stack of gapped 0.020" ZW-41406-TC gapped to 0.020" somewhere between a 2 and 4 foot length, the ultimate length I dont know, and neither are the number of windings on the primary side.

-The high voltage capacitor is triggered from 60 SCRs, Philps BT-151R if you need to incorporate that into a sophisticated Pspice model running Maxwell electromagnetics simulation software etc..

If you have the expertise and experience in designing pulse transformers with the above specifications, please submit your proposal.

Thank you.

Oblikovanje tokokrogov Elektro inženiring Elektronika Oblikovanje tiskanih vezij v PBC

ID projekta: #37481037

Več o projektu

2 predlogov Oddaljen projekt Aktiven pred 5 mesecema/meseci