FPGA programming on Xilinx ZCU104 FPGA

I am an EE engineer. I have lots of experience designing circuitry in both digital and analog circuits and in programming field worked with Xilinx and Altera FPGA boards writing VHDL and embedded C for NIOS II (field of interest). I have a background in digital design. I also worked with microcontrollers such as MSP430, Arduino, PIC, etc with both Assembly and C language . ABOUT YOUR PROJECT, you would check my portfolio which has a lot of successful projects in it. I have done lots of similar projects before and can handle your project easily. We can discuss it more over chat. Regards,

We are a team of Electrical and Electronics engineers and we are Excellent in the following areas: • Embedded C Programming. • VHDL/Verilog, LABView/ Multisim • Network Simulator NS2/3 • Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC and STM32. • IDEs like Keil MDK V5, ATmel studio and MPLab XC8. • PLCs / SCADA • PCB Designing-Proteus, Eagle. • IOT Technologies like Ethernet, GSM GPRS. • HTTP Restful APIs connection for IOT Communications. Also we have good command over report writing, I can show you many samples of our previous reports. Kindly consider us for your project and text me so that we can further discuss specifically about your project's main goals and requirements. We can deliver your project efficiently at a time. If you choose me, I think you won't regret. Best Regards. Also we have good command over REPORT WRITING, We can show you many samples of our previous reports. We can discuss further details in the message box.

Hi there Glad to see your job posting. I have read the description thoroughly. I can do this job as I have very strong command in Electronics Verilog / VHDL Microcontroller Electrical Engineering FPGA I assure you that I will provide you top notch quality of my work within the quick frame of time. Feel free to contact with me. i can send you samples as well as some of my previous work. Please you can also checkout my portfolio. Chat for further details! Here is my portfolio link: https://www.freelancer.com/u/doggar302?page=portfolio&w=f Thank u!

Hi. I am a FPGA Engineer with 6 years experience in Xilinx SoC. I works on communications project. Please share your requirements. I am a Vietnamese also.

Hi! I am experienced FPGA designer with more than 15 year of experience in Digital Design Engineering. I have a set of well finished FPGA and ASIC projects. These projects are of video processing, computation acceleration, signal processing, digital audio, high frequency signal generation, communication and control systems. I also have experience in verification (mostly with SystemVerilog) and embedded. I think I am good fit for you project. Best regards, Oleg Karavaev

hello, i m automation engineer, i have finished many projects i know siemens plcs,allen bradley plcs,hmi,scada,omron plcs,hmi,mitsubishi plcs so i can do let me discuss

Hi! I have a many years experience in xilinx zynqmp system, for both hardware and software part. Let discuss technical details of your project via chat. Thanks in advance Igor

hi, i have the desired skill set to work on FPGA. please go through my profile wherein i have listed my skills and expertise .I am willing to do this project , please share more information related to this work.

I am an Electrical Engineer with a masters degree I have high proficiency in Electrical Engineering, HVAC, LTE system model, Thermal system design, FPGA, Verilog / VHDL, Matlab/ Simulink, Microcontroller, Modeling, optimization, simulation of building energy systems: PCB Layout, Arduino and have been working on Industrial Automatics and Electronics. My fields of interest are Schematic design, Prototyping, PCB Design, Development of Electronic systems, Firmware and Software development. I would love to discuss this project with you and meet your exact requirements. I am confident I can provide you with top-notch materials that will fit your needs. Once you share the project, I will have a look & confirm if I can do it. I’m honest, creative and a unique person to acarry out your tasks given to me. Leaving your project with me is a privilege; I will make sure that the project is done in a perfect way and do my very best until you are satisfied. I pride my work on being professional, of the highest quality and always delivered on time. Thanks in anticipation a Electrical Engineer

Hello, I'm an expert FPGA / VHDL engineer with 12 years of experience (Including the Xilinx MPSOC SOC). Text me your requirements and we'll discuss your needs.

Hello, thank you for your job posting. I am a senior electrical engineer. I have plenty of experience in firmware development and micro-controller developments. I can write the firmware based on Arduino, Raspberry Pi, Pic, Atmega, FPGA, ARM, DSP, PLC and so on. And I can design the circuit with the Altium, Eagle, KiCAD, Allegro & OrCAD, PADs. I provide the services - Gerber files, Netlist generation, BOM generation and 3D Models of PCAD and ECAD. I am also good at AutoCAD, Solidworks. And I can simulate all circuits with Proteus, LT-spice, Matlab, Simulink, Multisim, and Labview as well. Due to my experience in firmware development, I will bring you the perfect result in time with high quality

i have experience in vhdl coding for different fpga's ... .

Hi. I have 3.5+ years experience in VHDL programming. I have worked on zynq FPGA earlier and quite a few others from xillinx and altera. For further details let's connect and chat.

Hello, I am Mechatronics Engineering senior grade student and I am doing a double major with Electrical and Electronics Engineering with heavy emphasis on FPGA. My graduation project is about FPGA Based Universal Central Controller Card Design and Robot Control via Cloud. I would be glad to work for you. King Regards.

HI. I have been a graduate researcher and work full time on FPGA developing. I am very familiar with the Xilinx ecosystem, including video processing pipeline IPs, AXI infrastructure and DMA, and I can use Vivado efficiently. I believe I have the needed skills for your project. Please drop me a text or call me on my phone number so that we can discuss further details.

hi, i have work experience of 2yrs in FPGA and RTL design, i have worked on most of the xilinx and intel boards, i have developed image processing for zcu104 in my company for the client related to indian gov. i have completed 4 projects successfully in my 2yrs from scratch. for more we can discuss trough mail, ph: +91 9121037189. thanks and regards sujith.

Myself Hassan Anwar. I have more than 10-years of experience in working with FPGAs centred Embedded Systems. Currently, I am working in a company name Neologictechs, I am working on optimizing the hashing algorithms for BlockChain Systems, USB-FET and stereo vision. Before, I worked as a Hardware design engineer in a company name Neonloops on smart energy meters, and auditory aid for an astronaut. I also worked as an FPGA researcher at LACIME lab, Montreal and Queens University Belfast. The work is based on the study of the effects of radiation on FPGA. I performed experiments to study the impact of radiation on FPGA. To do so first, I designed and developed a hardware setup based on ARTIX - 7 FPGA to test it under the radiation (neutron beam). Then I performed the extensive study to establish a relationship between bits and fault model also performed a sensitivity analysis of the FPGA bits towards the fault. This work also includes the development of a new emulation technique. I did my Masters in Computer Engineering from Polytechnique Montreal, I worked in a research Lab name MIST. My master’s thesis was related to the Probabilistic analyzable cache to estimate timing bounds. After my bachelor's in electronic engineering, I worked in a company name DigiTek. I spent most of the time on VHDL coding of different FPGA design, e.g., FIFO, DSP algorithms and memory cores. I also developed frequency hopped radio for secure communication.