PLC BASED PROJECT -- 2

A competent professional with 10 years of experience in Industrial Automation. Development of Engineering and implementation of PLC Control System, HMI and SCADA Development, testing & commissioning. ◾ PLC- Siemens- S7-1500F/H, S7-400, S7-400F/H/R, S7-300, S7-1200, S7-200, S5, TI PLC, LOGO!, Rockwell (Allen Bradley)- SLC500,MicroLogix,CompactLogix. Schneider- Zelio, M171/72 ◾HMI- Siemens-OP to Comfort Panels, Kinco,Deep-sea electronics,IFM ◾SCADA - WinCC, In-Touch Wonderware, Citect , Ignition ◾ Software- PCS7, STEP7, WinCC, WinCC-Flex, TIA portal,Protool Wonderware-Intouch, Comfort Soft, Microwin, S5-DOS,Pro-Tool, Prosave,project migration and upgrade,Codesys., RSLogix, Ecostruxure HVAC, SoMachine, Automation Direct ◾VFD- Siemens, Rockwell-AB, ABB, Telemechanique, SEW and Danfoss. ◾ Industrial Networks- PPI-MPI, Profibus, AS-i, Profinet, Ethernet, Modbus,Modbus TCP,GSD,GSDML, ◾ OPC - PC Access, OPC Scout, OPCUA,Metrikon, Kepware ◾ Project Documentation- ISA88/95, GAMP, 21CFR Part11, VP, URS, FRS, DS, IQ, OQ, PQ, SOP.

Hello! I work in the leading companies of Ukraine for fourteen years. I have more than 50 implementations of software and control systems ranging in size from one machine to the production department . My main specialty controllers SIEMENS: 200 , 1200 , 300, 1500, 400 series; Schneider: Premium, M340, M241, M251, M580, Quantum; Emerson, Rockwell PLC and a lot of smaller systems like Mitsubishi, Omron, LG, Fatek, VAGO, Click, Bernecker + Rainer, Unitronix and other. I know programming languages SIMATIC Step- 7, PCS-7, TIA-Portal; Schneider UnityPro, CoDeSys, SoMashine, Ignition SCADA, Citect Scada, WinCC, InTouch and many other. There are also implementations of the Internet of Things through Node Red.

Witam, Mogę wykonać ten diagram w Step 7 dla sterownika Siemens: S7-1200. Pozdrawiam Marcin

Dear Sir/Madam I have gone through HMI page as well as conveyor step logic required and understood the same. I have 12+ years of experience in PLC & SCADA and automation field from development, design and upto commissioning. Important point is majority of my experience in Siemens platform. below are the platforms from Siemens on which I have very good experience and expertise PLC: Siemens step 7_1200 /1500/400/300/200 and micro PLC i.e. LOGO PLC SCADA/HMI: WinCC Explorer, TIA Portal WinCC Advance/Professional/ Comfort, WinCC Flexible advanced PLC software: TIA Portal Vx (all versions), Simatic Manager Step-7, Microwin and Logosoft etc. I have good working team with me to speed up the work and ensure error free delivery of project by internal testing and simulation processes. Please consider my proposal and allow me to work on this project, I will ensure to complete project on time and with quality. We can discuss on timelines required to you. Thanks and Regards Ganesh Dighe

Hello there,  I understand that you need to get designs and PLC programmer for your product, I'd be more than happy to help you with that. I have +7 years experience in PLC, SCADA, HMI program development and site commissioning. worked on various platforms of automation family's Siemens, Schneider, Delta, Rockwell, Unitronics, LS and others. Please feel free to contact me so we can discuss your project in more details. Regards, Ahmed

dear sir, I can do programming as per your conveyor belt functioning requirement, bu I can't understand the hmi simulator png images you have attached, kindly mentions the function name of your digital inputs and outputs and please also clear me to what you can show or enter by using of memory word ( as per attached png images)

Please allow me for this work,i have 13 yrs of experience in automation having sound knowledge of plc,scada ie siemens,rockwell etc

Hello, I am working professionally with Siemens system and I understand your requirements. I have experience in this type of projects. Please contact me for sharing further details.

Having 6 years of rich experience in the cement and steel industry. Executed more than 14 projects related to automation with S7-1200/1500/300/400. This is very simple conveyor application. Can be completed in 5-6 days. Regards, Pradeep

A competent professional with 15 years of experience in Industrial Automation. Development of Engineering and implementation of PLC Control System, HMI and SCADA Development, testing & commissioning. ◾ PLC- Siemens- S7-1500F/H, S7-300, S7-1200, S7-200, LOGO!, Rockwell (Allen Bradley)- SLC500,MicroLogix,CompactLogix. ◾HMI- Siemens-OP to Comfort Panels, ◾SCADA - WinCC, In-Touch Wonderware,C# ◾ Software- PCS7, STEP7, WinCC, WinCC-Flex, TIA portal,Protool Wonderware-Intouch, Comfort Soft, Microwin, Pro-Tool, Prosave,project migration and upgrade, RSLogix. ◾VFD- Siemens, Rockwell-AB, ABB, Telemechanique, SEW and Danfoss. ◾ Industrial Networks- PPI-MPI, Profibus, AS-i, Profinet, Ethernet, Modbus,Modbus TCP,GSD,GSDML, ◾ OPC - PC Access, OPC Scout, OPCUA

Hi I will finish this project at maximum 3 days . You will receive from me a function block to use it . Let’s introduce myself to you . I am currently now working a full time job in leading automation company which is working in automated warehouses so this kind of programs is like my daily work

I have worked with Siemens s7-1200 PLC and HMI in many projects , All the requirements are straightforward.

Dear I am ready to start working in your project immediately I am an Automation and instrument engineer with experience of 9 years I work on siemens and schnieder PLCs I can provide you with similar projects to your project sincreley

Hello there, I'm the one for the job as I specialize in plc programming so I can easily meet your demand in no time.

Hello, I have gone through HMI page as well as conveyor step logic requirement. I am an electrical engineer in the food industry with proficiency in PLC/SCADA as well as HMI design. I have the following software development experience: -Programming environment PLC: Siemens Simatic (S7-200 S7-300 S7-1200 S7-1500 LOGO) SCADA: WinCC Network: Profibus Profinet Modbus SQL Server HMI: Siemens (WinCC Flexible, TIA Portal), Movicon -Experienced electrical design using EPlan and AUTOCAD -Experience in on site commissioning - Process design and improvement - Experience in project planning and implementation I have good working team with me to speed up the work and ensure error free delivery of project by internal testing and simulation processes. Please consider my proposal and allow me to work on this project, I will ensure to complete project on time and with quality. We can discuss on timelines required to you. Regards Rodney

B

Hi, I can do this job very quick and professional Just I need more additional info about this project Regards, Oleg.

Hi, with reference to your proposal. I would like to offer my service in this project. I have great experience in this field. I have done so many projects like this. Based on thatI would do what exactly you need.

Dear Sir/Madam, I have 5 years of experience on Siemens PLC and HMI, I have hands on on Siemens logo PLC to S7-400 and All types of HMI and WINCC (Siemens SCADA). I will complete your work on time and on your terms.

I am a mechatronics engineer. I will deliver the project on time. I have done many projects before.