Find Jobs
Hire Freelancers

An aerodynamics engineer wanted

$250-750 USD

Zaprt
Objavljeno pred več kot 2 letoma

$250-750 USD

Plačilo ob dostavi
An aerodynamics engineer wanted We need you to write the technical section of a project and project milestones on how to accomplish proof of concept of a new airplane wing. Will give more detail after you sign an NDA. Thanks
ID projekta: 31563686

Več o projektu

19 ponudb
Projekt na daljavo
Aktivno pred 2 letoma

Želite zaslužiti?

Prednosti oddajanja ponudb na Freelancerju

Nastavite svoj proračun in časovni okvir
Prejmite plačilo za svoje delo
Povzetek predloga
Registracija in oddajanje ponudb sta brezplačna
19 freelancerjev je oddalo ponudbo s povprečno vrednostjo $384 USD za to delo
Avatar uporabnika
Hi Greetings! I am a Mechanical with expertise in CFD. I can use both SolidWorks and ANSYS Fluent for CFD. I have done projects that include CFD of Cyclone Separator, CFD of vertical axis wind turbine to optimize TSR, CFD of jet engine compressor for recovery of wake region, Design of wing to optimize lift, etc. Given my experience of CFD projects, I believe I am the right person for this project. For this project, I will use SolidWorks for 3d Modelling and for CFD I will use ANSYS Fluent. Along with CAD and analysis files, I will provide a rich technical report explaining the results and steps involved. Kindly contact me to discuss further. Regards,
$500 USD v 7 dneh
4,8 (81 ocen)
6,6
6,6
Avatar uporabnika
Hey there! We are a group of highly professional engineers working together. I've masters of aerodynamics engineering. We'll provide you with quality work
$250 USD v 3 dneh
4,8 (97 ocen)
6,4
6,4
Avatar uporabnika
I can write the technical section of a project and project milestones on how to accomplish proof of concept of a new airplane wing. Please send details of work
$500 USD v 7 dneh
4,5 (51 ocen)
6,3
6,3
Avatar uporabnika
Hi, I hope you are doing fine. I have PhD in mechanical engineering from Tohoku University of Japan. I have published 20 Journal papers and 16 international conference papers. I have a lot of experience in automotive, aerospace, biotechnology, computers, electronics, microelectromechanical systems, energy conversion, robotics and automation, and manufacturing. I am also expert in mechanical engineering softwares including Ansys, Fluent, Comsol, CATIA, Solidworks, Abaqus and Inventor. I'm interested in your project. Please send me a message so that we can discuss more. Best regards.
$500 USD v 7 dneh
4,5 (71 ocen)
6,5
6,5
Avatar uporabnika
Hi, I am an expert on aerodynamic design, both for turbo-machine and aircraft wing. I can show you my previous work if we have a chance to cooperate. Regards, Long
$500 USD v 7 dneh
5,0 (1 ocena)
2,8
2,8
Avatar uporabnika
An aerodynamics engineer wanted I can help you with your homework & assignments to get A grade. I have helped several students multiple fields such as marketing, SWOT, PESTEL, Finance, Law, Sociology and Psychology. I know how to structure and format content with different writing styles such as MLA, APA, & Harvard. Please try me once at least. You will be satisfied. To check my samples please visit my profile; https://www.freelancer.com/u/HelpingDoor
$250 USD v 1 dnevu
5,0 (3 ocen)
2,1
2,1
Avatar uporabnika
Hello, I am an aerodynamicist at an AIAA DBF team (Cairo University team). I did write the technical section concerning the conceptual design of the aerodynamic design of the wing and other parts of the aircraft in both 2019 & 2020 Design reports. A version of my work will be sent via chat if you want. I did work in milestone of these projects and I do have a good experience with it. I am a CFD expert if you’re interested in any other things concerning CFD. Thanks and I will be glad to help.
$250 USD v 4 dneh
5,0 (1 ocena)
1,9
1,9
Avatar uporabnika
An aerodynamics engineer wanted Hi... It's Zeeshan here :-) I have read your project details and I can provide you QUALITY WORK within your given timeline and budget. I am very much sure that I can fulfill your expectations even with short deadline at very low prices. I am wokring in this inudustry since 2015 and I have served more than 2000 clients successfully. Kindly, visit my profile and check the attached samples; www.freelancer.com/u/innovationexpert
$250 USD v 1 dnevu
5,0 (2 ocen)
1,6
1,6
Avatar uporabnika
An aerodynamics engineer wanted Since 2012, almost from 8 years I am managing academic writing tasks successfully. I am working with my friends from different backgrounds, it means I can manage wide range of projects like; Engineering, Business, Arts, Computer Sciences, Medical Sciences, Mathematics and Statistics. Now I am here on freelancer.com to serve my clients with masterpiece against very REASONABLE PRICES. I can help you with your Online Exams, Quizzes, Summaries, Research Papers, Reports and Dissertations and ETC. I provide FREE Turnitin reports and countless revisions to my clients. I PROMISE you 100% SUCCESS. For samples, visit my profile: https://www.freelancer.com/u/FineIdeas
$250 USD v 1 dnevu
5,0 (1 ocena)
1,0
1,0
Avatar uporabnika
An aerodynamics engineer wanted This project is my strength and I can fulfill your requirements properly within your given deadline. I always give plagiarism-free work to my clients at very competitive prices. I have more than 10 years of writing experience, I have served more than 4000 clients on other forums including; Upwork, Fiverr and Guru. I have full grip over; Reports , Essays, Case Studies, Summaries and Dissertation Writing. Please give me a chance to show you my writing abilities. I am waiting for you. :)
$250 USD v 1 dnevu
0,0 (1 ocena)
1,6
1,6
Avatar uporabnika
I have experience in college about what you need and the project will be completed in 7 days or less
$500 USD v 7 dneh
0,0 (0 ocen)
0,0
0,0
Avatar uporabnika
because i am already working in similar type of industry i do FEA and CFD simulation using Ansys • Performing CFD and FEA analysis on various rotating machinery and calculating its performance including air delivery, velocity, acoustics, pressure. • Design and analysis of Blades, air purifier, blowers, windmills, house hold fan • Works with engineering team to perform CFD/FEA simulation and design optimization in support of development of commercial HVAC system and components. • Interact with mechanical designers and product engineers during product development to provide best engineering practices and processes. • Establish methodologies and equipment for thermal/structure performance characterization of our custom cooling components and systems. • Working with marketing team to provide technical support for customer pre- engineering design. • Developing solution to complex problems, analyzes data, provides technical interpretation and recommendations, and contributes to the documentation of results. • Perform heat transfer, fluid dynamic, and structural mechanical analysis. • Responsible for original product design and provides authoritative technical leadership to engineers.
$455 USD v 30 dneh
0,0 (0 ocen)
0,0
0,0

O stranki

Zastava UNITED STATES
Solana Beach, United States
0,0
0
Plačilna metoda je verificirana
Član(ica) od avg. 17, 2021

Verifikacija stranke

Hvala! Po e-pošti smo vam poslali povezavo za prevzem brezplačnega dobropisa.
Pri pošiljanju vašega e-sporočila je šlo nekaj narobe. Poskusite znova.
Registrirani uporabniki Skupaj objavljenih del
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Nalaganje predogleda
Geolociranje je bilo dovoljeno.
Vaša prijavna seja je potekla, zato ste bili odjavljeni. Prosimo, da se znova prijavite.