Verilog module that reboots 7 series FPGA

Končano Objavljeno pred 4 letoma/leti Plačilo ob prevzemu
Končano Plačilo ob prevzemu

A verilog module shall be generated, that reboots a 7 series FPGA.

It shall be compatible with all 7 series FPGAs, but at least with the following:

- XC7A200T-2FBG676C

- XC7K160T-2FFG676I

- XC7K325T-2FFG676I

The module will be tested on existing hardware, which uses master SPI x4 boot mode.

The module input should be:

- clk - up to 160MHz

- reboot - a rising edge on this pin shall trigger the reboot of the device

Deliverables:

- a verilog module providing the function described above

- a simulation test bench

Milestones:

- 100% payment after succesful test on our hardware

Elektronika FPGA Verilog / VHDL

ID projekta: #19164896

Več o projektu

3 predlogov Oddaljen projekt Aktiven pred 4 letoma/leti

Dodeljeno:

ahmedmohamed85

Dear sir I have more than 10 years experience in digital design using Verilog, I have many 7 series Xilinx FPGA boards available with me, please message me so that we can discuss Best regards

€155 EUR v 3 dneh
(391 mnenj)
7.8

3 freelancerjev ponuja v povprečju za €170 na tem delu

ENG1mga

Hi sir, I am a mechatronics engineer professional at Verilog. I can do all you need perfectly. so, contact me for further details. THANKS

€200 EUR v 3 dneh
(3 ocen)
1.8
wadieejeljli

Hi, I am an electronics engineer and i'm new in the freelance world. I work as an automotive software developer on behalf of continental AG. I have basic knowladge on electronic design and embedded systems. Your p Več

€155 EUR v 3 dneh
(0 ocen)
0.0