Find Jobs
Hire Freelancers

PIC Micro controller program using PWM technique.

₹1500-12500 INR

Opravljeno
Objavljeno pred približno 6 leti

₹1500-12500 INR

Plačilo ob dostavi
I am looking for a programmer to code my PIC microcontroller to drive a 6v dc motor using a PWM technique - The battery is in series - 3.6v x 2 = 7.4V LiPo 1000mAh The Motor Nominal voltage: 6VDC No-load speed: 13000rpm No-load current: 0.46A Stall torque: [login to view URL] Stall current: 11.8A The PWM technique should maintain the voltage at an average of 6V to the motor until the voltage of the battery drops below a threshold value, this will ensure that the motor speed does not drop as the battery discharges on use. You can find attached the design layout of the PCB and microcontroller/driver used.
ID projekta: 16325772

Več o projektu

16 ponudb
Projekt na daljavo
Aktivno pred 6 leti

Želite zaslužiti?

Prednosti oddajanja ponudb na Freelancerju

Nastavite svoj proračun in časovni okvir
Prejmite plačilo za svoje delo
Povzetek predloga
Registracija in oddajanje ponudb sta brezplačna
Dodeljeno:
Avatar uporabnika
Having experience in pic from last 5 years, we have good knowledge regarding pcb design, circuit development & firmware. I already worked on similar projects, so I can execute this project within time
₹6.111 INR v 8 dneh
4,4 (1 ocena)
1,9
1,9
16 freelancerjev je oddalo ponudbo s povprečno vrednostjo ₹6.566 INR za to delo
Avatar uporabnika
Hi, I am a post graduate power electronics engineer and having very good experience in product design and development. I am excellent in embedded design & programming using pic, dspic controllers and MATLAB codding for Power projects, Boot loaders, Bluetooth & GPS designs,CAN communication, EEprom. UART , RF circuits ,Protocols for networking, wi-Fi routers,OBD diagnosis with CAN bus protocols, Electrical vehicles and AC drives, stepper motor controls. I designed sine wave inverters for standalone and grid tie Inverters. I designed projects like Off line UPS up to 3 KVA, synchronous rectifiers, Solar MPPT chargers, Solar trackers, Battery chargers ,Grid tie inverters design with PLL and feedback control circuit emergency light of 66W and Online UPS control cards, Battery Charging power supplies, LED drivers for PWM controlling and dimming, SMPS, Power supplies. I have experience in schematics and PCB design experience in Altium and ORCAD. I am ready to work for you. Please contact for further discussion.
₹27.777 INR v 10 dneh
4,9 (51 ocen)
6,6
6,6
Avatar uporabnika
Master in Engineering, Electrical and Electronic Engineering undergraduate student, who is dynamic, reliable, resourceful, committed and organized with enthusiastic approach to succeed with a pleasant attitude. Possessing excellent analytical skill and good research background. I have successfully completed IELTS with an overall band of 7 and have a good proficiency in English COMPLETED PROJECTS • FM radio. • VHDL Design of an Up/Down Counter. • Design of Up/Down Counter using PIC. • Duck Shooter Program using C. • Pointer movement controller on 2-dimentional axis using C. • LCD display Manipulation projects including: o Text Display o Volt-Meter • Analog to Digital Conversion (8-bit). • Sound to Light Color Organ Design and Development. • Minesweeper Player Creation using PIC. • Simulation of an End to End Communication System with MATLAB. • (BENG Individual Project) (MENG Part A). • (MENG Individual Project) (MENG Part B). • (MENG Group Project).
₹1.750 INR v 3 dneh
4,6 (10 ocen)
4,2
4,2
Avatar uporabnika
How r u?Bro,,Its me Imad,, Have done 200+PROJECTS REGARDING MATLAB, ARDUINO, VB.NET, PHP, HTML, PCB DESIGNING and much more. Some of the projects are as follows. 1. NEXTION LCD Based bike monitoring and Control System. 2. esp 8266 Home automation and monitoring. 3. Anti theft car system and gps locator U will feel brotherhood.
₹2.475 INR v 3 dneh
4,6 (23 ocen)
3,9
3,9
Avatar uporabnika
I am electrical engineer .I have lot of experience working with various employers globally. Can I do Circuit Analysis and design, Power System Analysis,DC/AC machines Electrical Distribution , translation and technical writer .i use Autocad,Matlab,Revit,Plc simulator, Pspice,word and excel.
₹7.777 INR v 3 dneh
4,7 (11 ocen)
2,9
2,9
Avatar uporabnika
Hello, I want to apply for your project. I have BS in Electronic engineering.I have worked with various Microchip controllers and MP Lab. I use Altium Designer 17. Please check my portfolio with some of my latest projects. Looking forward for your answer.
₹11.111 INR v 3 dneh
5,0 (2 ocen)
1,9
1,9
Avatar uporabnika
A proposal has not yet been provided
₹2.250 INR v 5 dneh
0,0 (0 ocen)
0,0
0,0
Avatar uporabnika
I have done project on Arduino microcontroller....My field of interest is IOT
₹7.777 INR v 5 dneh
0,0 (0 ocen)
0,0
0,0
Avatar uporabnika
Dear Client. Thank you for your kindly visiting to my profile. As High-Skilled Embedded System Designer, Developer and Manager, I have full experience and rich knowledge of Embedded System Development. 1) Rich Schematics and PCB designer. - Over 11 years designing experiences using Altium and Cadence Design Tool and Simulation Tools. 2) Firmware Development Experiences. - Rich knowledge and experiences at C/C++/Embedded C. - I like using various of MPU, ARM and embedded system equipment. MCUs : Atmel AT91SAM7SE512, PIC16F/18F, Atmega family, 8051 family, NRF51822/52832, LPC,Nuvoton 8051 Family Wifi-MCUs : ESP8266/ESP32. Arduino: Arduino UNO, Arduino Mega328, Arduino NANO Linux-Embedded: Raspberry Pi, - Experience with Keil, IAR, Atmel Studio, CubeSuite+, Arduino, MPLABE,Eclipse,Altium (For PCB Design), Cadence (For PCB Design) - Rich experiences at variant peripherals. UART, I2C, SPI, USB, Bluetooth, Wifi, Gyro/Accelometor, GPS, GSM/GPRS, Finger Print Module, Magnetic cardreader, RF Card Reader, Thermal Printer(POS) - -Experiance with all types of display like Color LCD,TFT, Monochrome LCD, 2 x 16 LCD 3). Experience. - embedded controlling system. - Wearable IOT project. - Variant BLE sensor project. - iBeacon project. - GPS based vehicle Tracker - BLE based Student Attendance System - Medical - Ventilator - Handheld POS machine - ESP8266 based home automation I'm always work on my client's timezone. Thank you for your time.
₹5.555 INR v 7 dneh
0,0 (0 ocen)
0,0
0,0
Avatar uporabnika
A proposal has not yet been provided
₹1.750 INR v 1 dnevu
0,0 (0 ocen)
0,0
0,0
Avatar uporabnika
Electronic engineer with 8 years of experience in automation and industrial control, Experience in programming c, c ++, MATLAB, LABVIEW, certification IPC-A-610, IPC 7711/21, IPC-A-620, all projects are developed under the standards IPC necessary for the PCB to be manufactured with quality, FR4, flex among others, the gerber is generated with its BOM list, plus the ability to develop the Firmware.
₹8.333 INR v 10 dneh
0,0 (0 ocen)
0,0
0,0
Avatar uporabnika
I've exp. of 4 years with programming of pic micro-controllers and designing of the required electronics circuits
₹1.750 INR v 3 dneh
0,0 (0 ocen)
0,0
0,0
Avatar uporabnika
I have experience in design pcb and programing microcontroller PIC using PWM,if you need help I can help you just send me and I will do the job
₹3.333 INR v 3 dneh
0,0 (0 ocen)
0,0
0,0
Avatar uporabnika
A proposal has not yet been provided
₹1.750 INR v 5 dneh
0,0 (0 ocen)
0,0
0,0

O stranki

Zastava INDIA
Pune, India
4,8
1
Plačilna metoda je verificirana
Član(ica) od jul. 30, 2012

Verifikacija stranke

Hvala! Po e-pošti smo vam poslali povezavo za prevzem brezplačnega dobropisa.
Pri pošiljanju vašega e-sporočila je šlo nekaj narobe. Poskusite znova.
Registrirani uporabniki Skupaj objavljenih del
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Nalaganje predogleda
Geolociranje je bilo dovoljeno.
Vaša prijavna seja je potekla, zato ste bili odjavljeni. Prosimo, da se znova prijavite.