Find Jobs
Hire Freelancers

PLC field technician

$750-1500 USD

Zaprt
Objavljeno pred več kot 3 leti

$750-1500 USD

Plačilo ob dostavi
Start up and troubleshooting of industrial furnace using PLC controls
ID projekta: 26691574

Več o projektu

32 ponudb
Projekt na daljavo
Aktivno pred 4 leti

Želite zaslužiti?

Prednosti oddajanja ponudb na Freelancerju

Nastavite svoj proračun in časovni okvir
Prejmite plačilo za svoje delo
Povzetek predloga
Registracija in oddajanje ponudb sta brezplačna
32 freelancerjev je oddalo ponudbo s povprečno vrednostjo $1.005 USD za to delo
Avatar uporabnika
Hi there,I'm biddin on your project "PLC field technician "Engineering, PLC & SCADA, Electrical Engineering, Electronics and Microcontroller Start up and troubleshooting of industrial furnace using PLC controls I have read your project description and i'm a Professional Engineer therefore i can do this project for you perfectly.I still have a few questions. please leave a message on my chat so we can discuss the budget and deadline of the project. Thanks. .. .
$1.500 USD v 5 dneh
4,8 (102 ocen)
7,7
7,7
Avatar uporabnika
Hello, thank you for your job posting. I read your description about--PLC I am a senior electrical engineer. I have plenty of experience in firmware development and micro-controller developments. I can write the firmware based on Arduino, Raspberry Pi, Pic, Atmega, FPGA, ARM, DSP, PLC and so on. And I can design the circuit by the Altium, Eagle, KiCAD, Allegro & OrCAD, PADs. I provide the services - Gerber files, Netlist generation, BOM generation and 3D Models of PCAD and ECAD. I am also good at AutoCAD, Solidworks. And I can simulate all circuits with Proteus, LT-spice, Matlab, Simulink, Multisim, and Labview as well. Due to my experience in firmware development, I will bring you the perfect result in time with high quality. I will also give you a detailed explanation of the process. Looking forward to hearing from you soon Thanks
$760 USD v 2 dneh
4,9 (116 ocen)
6,5
6,5
Avatar uporabnika
$1.111 USD v 5 dneh
4,9 (14 ocen)
6,2
6,2
Avatar uporabnika
Hi, my name is Fabio I'm from Padova Italy. I'm a senior developer in Automation technology. I know very well Siemens Simatic Products: Simatic S7 and Tia portal. I made job for steel mills and brick furnace. If you need any informations please contact me. Best regards
$1.200 USD v 30 dneh
5,0 (4 ocen)
4,4
4,4
Avatar uporabnika
Hello... How are you?... I have master degree in Mechatronics embedded Engineering and I have 7 years of Industrial experience in dealing with Electronics Instrumentation and Automation. I am expert in dealing with all type of PLCs like Siemens, Allen Bradley, Delta, Mitsubishi, Omron, Fatek, Schnieder etc. I have done many industrial projects Related to all type PLCs. I have read your requirement and you want me to troubleshoot PLC. I can do your task easily in no time. I will send you sample of work if you ask. I will give you complete guide on project and you can pay after the completion of the project Since I am new at free Freelancer.com I will give you cheapest price for service because I am building my profile. Kindly contact me and we will discus the detail of task. Waiting for your response! Regards M Ali Abid
$750 USD v 1 dnevu
4,9 (10 ocen)
4,2
4,2
Avatar uporabnika
Specialized in Automation Engineering with a solid background in Electrical Power Engineering, over 14 years of work experience gained throughout multiple Automation platforms (Rockwell, Schneider, and Siemens) achieving various types of projects functions & designs (Oil/Gas/Material processing, Energy/Power Management Systems [EMS/PMS], Manufacturing Processes, etc…) and using my leadership capabilities for managing projects in all sizes and scales (from turnkey projects to small services). Please have a look over my portfolio and reviews.
$750 USD v 7 dneh
5,0 (4 ocen)
4,2
4,2
Avatar uporabnika
Hi there, We can help you in this project. Please initiate the interview process. We have already developed many electronic products:- GPS Controlled Relay Event status using CC1310 chip Prayer Watch Wireless Alarm System Power Bank Camera slider controller Wifi home automation Bulb with remote control Curtains with remote control Automatic flush control Smart watch for hajj We will be glad to hear from you! Regards, Intellisense Technology
$1.300 USD v 7 dneh
4,9 (4 ocen)
4,3
4,3
Avatar uporabnika
Hi. I read your request about PLC project . I can help you with these problems. I am Ph.D. student in automation and control system, I have a good experience in PLC Siemens and SCADA, and control system. I can do it You can see my previous works in my portfolio I have the honor to deal with you
$1.000 USD v 7 dneh
5,0 (11 ocen)
3,8
3,8
Avatar uporabnika
Hello i m automation and control engineer i have finished many project i know siemens plcs,scada,hmi allen bradley plcs,factory talk omron plcs,mitsubishi plcs, and also robotic programming
$750 USD v 7 dneh
4,3 (12 ocen)
4,1
4,1
Avatar uporabnika
Dear Sir/Madam, I am Electrical Engineer with MS in Industrial Control Systems. I have fine experience of 6 years in Oil and Gas sector. I use to be very active on this website when I was student. I can do your projects economically because I want good reputation. Resolving problems of PLC and industrial automation is my daily routine so I can do it easily. Looking forward to work with you. Best Regards
$750 USD v 1 dnevu
4,9 (19 ocen)
3,7
3,7
Avatar uporabnika
Hi! I see that you are from Canada. Maybe you need a control systems engineer and PLC programmer to work? I look job in Canada as a foreign worker by NOC 2133. I could work for you. Please let me know if you interest in it, I will send you my CV.
$1.000 USD v 14 dneh
4,6 (8 ocen)
3,7
3,7
Avatar uporabnika
I'm electronic engineer with experience in field in oil and food industries. I've worked with AB, Mitsubishi, Siemens, GE and Omron.
$1.125 USD v 7 dneh
4,4 (2 ocen)
2,2
2,2
Avatar uporabnika
I have a solid background in PLC controlled systems thus I believe I can handle this project.I have been involved in other plc projects too on site
$800 USD v 3 dneh
0,0 (0 ocen)
0,0
0,0
Avatar uporabnika
I am new to this freelance. I have a good experience with PLC's of Fanuc, Mitsubishi, Siemens and Heidenhain. Let me explain your requirement. look forward to hear you. have a good day.
$750 USD v 2 dneh
0,0 (0 ocen)
0,0
0,0
Avatar uporabnika
I went through your requirements. It is very interesting project. I would be delighted to be part of it. I am sure to complete this project on required time. Gladly my skills + experience perfectly aligns with the requirements you need. I am pretty confident to assist you in this. I am having work experience of 4 years, in working in this & have handson experience on various 3D design platforms like catia & solidworks. In addition to to I have good skills in PLCs systems like Siemens, Bosch Rexroth, Allan bradley & Mitsubishi & Virtual Universe Pro. I have done multiple projects related to Industrial automation & hold excellent proficiency. I have sound record of successfully completing projects up here with my team. Please go through some project I have completed in my portfolio section. I strongly believe, you'll be satisfied after awarding me this project. I will provide you best quality result on time with 100% commitment of effort from my side. Let's initiate the chat & discuss the details over it. Thanks!
$1.000 USD v 7 dneh
0,0 (0 ocen)
0,0
0,0
Avatar uporabnika
Hi, what you want? a PLC programmer ? what's the troubleshooting are you talking about? what's the PLC you work? It is a regular furnace or he have a supervisor network? It is for a start up or a retrofitting ? You are welcome to answer ;)
$750 USD v 1 dnevu
0,0 (0 ocen)
0,0
0,0
Avatar uporabnika
Hello Gentleman, I am experienced in commissioning and installation of Hardening and tempering furnace(Wiensroth). And we done preventive maintenance periodically, breakdown maintenance and predictive maintenance in my past employee. And I have done mechatronics, so PLC is my basis core. I hope you understand my experience.
$889 USD v 4 dneh
0,0 (0 ocen)
0,0
0,0
Avatar uporabnika
hello i have 5 years working experience in plc maintenance i have experience in siemens , omran .i can able to do this project
$750 USD v 7 dneh
0,0 (0 ocen)
0,0
0,0
Avatar uporabnika
Mechatronics Engineer with 10 years experience in industrial automation in industrial robotic arms, oil & gas and factories production lines, with very strong background in projects from design to commissioning
$1.125 USD v 7 dneh
0,0 (0 ocen)
0,0
0,0
Avatar uporabnika
Hi, If you need a professional ? My name is Onur. I live in Turkey, I am a Automation Engineer. I have a lot of control and scada project .My automation experience is 5 years. I can help u .
$1.000 USD v 7 dneh
0,0 (0 ocen)
0,0
0,0

O stranki

Zastava CANADA
Oakville, Canada
0,0
0
Član(ica) od jul. 24, 2020

Verifikacija stranke

Hvala! Po e-pošti smo vam poslali povezavo za prevzem brezplačnega dobropisa.
Pri pošiljanju vašega e-sporočila je šlo nekaj narobe. Poskusite znova.
Registrirani uporabniki Skupaj objavljenih del
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Nalaganje predogleda
Geolociranje je bilo dovoljeno.
Vaša prijavna seja je potekla, zato ste bili odjavljeni. Prosimo, da se znova prijavite.