Electromechanical/ Mechatronics Engineer - ABB Robotics

Hi there,I'm biddin on your project "Electromechanical/ Mechatronics Engineer - ABB Robotics" I have read your project description and i'm an expert in Mechanical Engineering domain therefore i can do this project for you perfectly.I still have a few questions. please leave a message on my chat so we can discuss the budget and deadline of the project. Thanks. .. .

Hi, I hope you are doing fine. I have PhD in mechanical engineering from Tohoku University of Japan. I have published 20 Journal papers and 16 international conference papers. I have a lot of experience in automotive, aerospace, biotechnology, computers, electronics, microelectromechanical systems, energy conversion, robotics and automation, and manufacturing. I am also expert in mechanical engineering softwares including Ansys, Fluent, Comsol, CATIA, Solidworks, Abaqus and Inventor. I'm interested in your project. Please send me a message so that we can discuss more. Best regards.

Hi, I have great Mechanical Engineering Experience I have a master’s degree in Solid Mechanics. I am a Product Specialist with over 6 years work experience. My experience evolves around Mechatronics, Hydraulic actuator, 3D modeling, 3DRenderings and Drawings, FEA, CAD/CAM, Matlab, NX, CFD, AUTOCAD, CATIA, Nastran, Solid works, Product Design, Graphic Design, Fluent ANSYS, and simulation-based numerical optimization. I only take up tasks that I have experience in; I am honest, time conscious and can work under so many conditions. I love challenges as it helps my creativity skills and aids me to showcase my individual tools. All I need from my employer is the project in details and I am set to begin work on it. I always love to meet up with your requirements. I am open for corrections and modification, I am also a peaceful person and my aim is to have a good experience with my employers and create a long term relationship with them. It is however going to be of a great privilege if you can entrust your task in my hands. I promise to give you a great experience working for you.

Hello! We are the right choice for this project. We have our own team of engineers, designers & programmers and we formerly named as “IdeasAssistant Team”. We can do this project professionally because we did many similar projects before. We can also share pictures & videos of our past projects with you. For your project, we will do everything you need either it is circuit design & schematics, firmware development & programming, PCB design & development, whole 3D design, testing and development of device or product. In addition to this, we can also design & develop web interface, user interface and application for your device if you want. Even, we can develop and send a working prototype to your location for your product or device. We are very experienced in electronics, electrical, software and mechanical engineering research projects design & development. We can handle all programming related tasks as well. We have specialized and dedicated lab for testing of everything also. We will do all design, development of your project. For any query, please feel free to contact us using chat option. Regards, IdeasAssistant Engineering Team

Hi! I have understood your requirnments about your project with every detail of it. I am an Electrical Engineer with more then 9 years experience in electronics, circuit design, PCB layout, Verilog, FPGA, Embadded System, microcontrollers, Proteus, Arduino, ESP32, Raspberry pi, NB-IOT, Algorithm and Product design. I can assure satisfactory work. I'll be glad to work with you. Thank You!

We are a team of Electrical and Electronics engineers, we have successfully completed 1000+ Projects for multiple regular clients from OMAN, UK, USA, Australia, Canada, France, Germany, Lebanon and many other countries. We are providing our services in following areas: • Embedded C Programming. • VHDL/Verilog, LABView/ Multisim/PSPICE • Network Simulator NS2/NS3 • Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC and STM32. • IDEs like Keil MDK V5, ATmel studio and MPLab XC8. • PLCs / SCADA • PCB Designing-Proteus, Eagle. • IOT Technologies like Ethernet, GSM GPRS. • HTTP Restful APIs connection for IOT Communications. Also we have good command over report writing, I can show you many samples of our previous reports. Kindly consider us for your project and text me so that we can further discuss specifically about your project's main goals and requirements. We can deliver your project efficiently within timeline. If you choose me, I think you won't regret. Best Regards.

Hi there, I am Nigar Ahmed with PhD in control theory and control engineer. I am currently working as a research at faculty of electrical engineering and computing, University of Zagreb. I see myself qualified for this position because you are looking for someone with background in robotics/aerospace and my specilization is exactly in the flying robots, UAVs. Let me know if you have any questions. We can discuss it inbox. Looking forward to hearing from you soon. Best regards

Hi I'm professional electrical engineer and I have sound knowledge about this so text me over chat to discuss further details This bid is negotiable so we can discuss about deadline and budget

Hi, I am a mechatronics engineer with a good experience in design, modelling and simulation of electrical and mechanical systems. I have also an experience with ABB robot programming and robotstudio.

O.H. is a team of two highly dedicated mechanical engineers. Mechanism design, multibody simulation and control are their main arsenal. They are experienced in designing formula student electrical vehicles, robotic arms, four bar mechanisms and 3D printed bionic arm. In addition to detailed design, we offer a validation for kinematic and dynamic behaviors with MSC ADAMS, the gold standard of rigid body dynamics. To ensure foolproof results that you would trust. We have worked on many mechatronic projects like SCARA robotic project before that was used to cut a battery case; you can find it on our portfolio. The details of the setup was hidden as per our client request, since we respect his privacy. More projects includig robotics, control, programming could be shown up upon requesr. A professional technical report will be generated that outlines the thought process, along with the results. MATLAB & ADAMS files will also be sent so that you can view all the results so you can present it in anyway necessary We are competent for the job and we are ready to do more than required in order to provide you higher quality. O.H. Engineers that meet your needs

HELLO DEAR EMPLOYER, First receive warm greetings, and hoping you are good, i welcome you to the home of Amazing services and quality. MASTERS IN MECHATRONICS I'M AN EXPERT IN NAMED SKILLS, OVER 18 YEARS OF EXPERIENCE, After KEENLY reading your description and being in possession of all CLEARLY STATED REQUIRED SKILLS as this is my area of PROFESSIONAL SPECIALISATION having the above QUALIFICATIONS, i hereby humbly request you to consider my bid for QUALITY and PROFESSIONAL work. ###// No timeline & Quality Excuses// Unlimited Revisions// 100% SATISFACTION GUARANTEED### Message Me We Discuss More About The Project. incase the project is deleted please hire me directly using the following link; https://www.freelancer.com/u/freelancerngunzu THANK-YOU & WELCOME.

Hello Sir! I just reading your requirements. I'll do it. I am a skilled Mechatronics, Electronics, and Control Engineer with three years of expertise in the area. I have extensive expertise with Microcontrollers, PLCs, and SCADA systems, as well as control systems, machine and circuit design, and automation. I am known for my attention to detail and precision in the handling and manipulation of automated equipment control systems. Furthermore, I have a demonstrated track record of excellent communication, having served as a liaison between diverse teams, including design, manufacturing, quality assurance, and machine shop floor employees. I have huge expertise in: o Arduino o MATLAB o Simulink o Machine Learning o Machine Vision o Neural Networks o Machine design (CAD/CAM design) o IOT (ESP32, ESP8266) o PCB Design and Layout o Artificial Intelligence o Proteus o Multisim o AutoCAD o SolidWorks o Comsol

Hi, There I just read your project description, and I've already done a similar kind of work. i just checked your project details, and can confirm good result you want. I have massive experiencesCAD/CAM,product design&manufactring. I have rich experiences related with design. For a long time i built 3d model for 3d printing. I am an experit in 3D modler, DFM, Welding, CNC machine, etc... If you give me a chance to work with you, then I will do my best to reach your requirements. Best Regards.

hello, I have read your project description that you need an experienced Electrical engineer for Electromechanical/ Mechatronics Engineer - ABB Robotics . i am a professional electrical engineer with 10 years experience, and can do your project professionally according to your requirements, for further details you DM me in chat box. thank you

Hi, I am a student in my last year of mechanical engineering. I have dedicated myself to study and work in the automotive area during all my professional career. During these last years I have taken some basic courses such as: Solidworks, Autocad, Microsoft Excel and English language up to advanced level. I like to be self-taught and I adapt myself to any area of work, I am good at working in a team as well as alone. I like to listen to criticism so I can learn from my mistakes so I don't make them again. I am always looking to improve myself personally and professionally.

Hello, Greetings!! I am Vinoth from Electrical Engineering background and I have 18 years of software Experience in Aerospace Industry in various Electro Mechanical products. I have worked in Honeywell Aerospace for the past 7 years as Lead Engineer where I have mainly involved in Flight Control systems. I am a Certified "Lean Expert" from Honeywell. I have involved in Design, Development of various electro-mechanical products such as Flight control systems. Having experience in Verification and Validation of products in different test rigs. Also i have involved in various product development life cycles. I have good experience in Robotics Software development using ROS, Having experience in Computer vision, object Detection and obstacle avoidance. I have worked in Publisher, Subscribers, SLAM, ROS Navigation stack, path planning and AMCL/Particle filter. I also have good experience in Camera, LIDAR, IMU and RADAR and different settings. Having descent understanding on Sensor fusion and Kalman filters. I have involved different testing approach such as Test Driven Development, Unit, Integration testing and Acceptance testing. GUI based software shall be tested based on the functionality or the use case requirements. Thank you for your time, and I look forward to hearing from you soon.

Hi, I’m a mechanical Engineer, with 15 y experience, last years I’ve been developing automation projects using robotics (17 implemented projects. I’am capable to developr your projects. Regards Daniel Ddl engineering