Find Jobs
Hire Freelancers

Plastic molding plant- IoT automation with graphical web page display

₹75000-150000 INR

Zaprt
Objavljeno pred več kot 6 leti

₹75000-150000 INR

Plačilo ob dostavi
Main Screen to contain below real time data for all machines Part name (Part number) with Machine name Current status (with downtime code) - Color coding (Green --ok Red--not ok) Target and current parts being produced - Color coding After clicking on one of the machines on Main Screen and Logging in, user will arrive to the Front Screen Front Screen to contain below real time + 1 previous shift data for each machine Part name (Part number) with Machine name Current status (with downtime code) - Color coding Target and current parts being produced - Color coding Target and Current Cycle Time OEE PPM (% Rejection) Hydraulic pressure v/s cycle time Screw position v/s cycle time Alarms/Warnings Oil Temp Oil Level Any other JH/PM monitoring After further clicking on the Front Screen, user will arrive to the Back Screen where user will enter the period of time and part number (or part name) Back Screen to contain up to 1 yr. history for each machine with the below data OEE PPM (% Rejection) Cycle Time Target Cycle Time Hydraulic pressure v/s cycle time Screw position v/s cycle time Alarms/Warnings Oil Temp Oil Level Any other JH/PM monitoring IOT Data Machine name – Automatic Part name (Part number) - Can be manually entered (machine should not start until entered) Current status – Automatic from machine Downtime Code – Manual (Machine should not start until entered) Target parts being produced – To be taken from Excel file provided by us Target Cycle Time - To be taken from Excel file provided by us Current Cycle Time – Automatic from machine Current parts being produced – To be taken from no. of Barcode produced minus no. of rejections OEE – Automatic Calculation PPM (% Rejection) – Automatic Calculation Hydraulic pressure v/s cycle time - Sensor/PLC data from machine Screw position v/s cycle time – Sensor/PLC data from machine Alarms/Warnings – PLC/IO data from machine Oil Temp – Sensor/PLC from machine Oil Level - Sensor/PLC from machine Any other JH/PM monitoring – 10 new Sensors to be added on machine for collecting further data
ID projekta: 15867107

Več o projektu

3 ponudb
Projekt na daljavo
Aktivno pred 6 leti

Želite zaslužiti?

Prednosti oddajanja ponudb na Freelancerju

Nastavite svoj proračun in časovni okvir
Prejmite plačilo za svoje delo
Povzetek predloga
Registracija in oddajanje ponudb sta brezplačna
3 freelancerjev je oddalo ponudbo s povprečno vrednostjo ₹139.074 INR za to delo
Avatar uporabnika
interested to do the application i need to ask some question so please send private message thank you **********************************************
₹167.222 INR v 30 dneh
5,0 (12 ocen)
5,0
5,0
Avatar uporabnika
Have done complete injection molding/extrusion systems with a lot more advanced analytics, using various PLCs. Drivers for different PLCs are also done.
₹125.000 INR v 30 dneh
0,0 (0 ocen)
0,0
0,0

O stranki

Zastava INDIA
India
0,0
0
Član(ica) od dec. 13, 2017

Verifikacija stranke

Hvala! Po e-pošti smo vam poslali povezavo za prevzem brezplačnega dobropisa.
Pri pošiljanju vašega e-sporočila je šlo nekaj narobe. Poskusite znova.
Registrirani uporabniki Skupaj objavljenih del
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Nalaganje predogleda
Geolociranje je bilo dovoljeno.
Vaša prijavna seja je potekla, zato ste bili odjavljeni. Prosimo, da se znova prijavite.