Find Jobs
Hire Freelancers

Drafting specialist

$15-25 CAD / hour

Zaprt
Objavljeno pred več kot 1 letom

$15-25 CAD / hour

My company does custom staircases and I require steel fabrication drawings for the mono beam stringer fees
ID projekta: 34835586

Več o projektu

70 ponudb
Projekt na daljavo
Aktivno pred 1 letom

Želite zaslužiti?

Prednosti oddajanja ponudb na Freelancerju

Nastavite svoj proračun in časovni okvir
Prejmite plačilo za svoje delo
Povzetek predloga
Registracija in oddajanje ponudb sta brezplačna
70 freelancerjev je oddalo ponudbo s povprečno vrednostjo $19 CAD/uro za to delo
Avatar uporabnika
Hello! My name is Artsakh! If you are looking for a professional in the field of architecture, design and cad modeling, then read my application to the end. Yes, I really reviewed your project Drafting specialist and I am ready to make your project very high quality. I have a master's degree in architecture and have studied architecture for 6 years. I have 13 years of experience with hundreds of projects all over the world. I mainly deal with architecture, interior and exterior design, landscape design, cad and beam modeling, and I will make all the necessary 2d drawings for the construction of these buildings. Please contact me to discuss project details, cost and deadline for your project. I would love to make your project, with a very high quality. Sincerely, Artsakh! And thank you for reading to the end!
$25 CAD v 40 dneh
5,0 (49 ocen)
6,9
6,9
Avatar uporabnika
Hi there, I am a Structural Engineer experienced in Structural design & drawing preparations for steel, timber and concrete structures. I've read your brief, and can assist you with the needed structural fabrication drawings. My 9+ Civil/Structural Engineer experience cuts across Architectural and Engineering planning and designs, Material Quantity Estimation and Take-off, and supervision of projects of Reinforced Concrete, Steel/Aluminum and Timber structures inclusive of earth retaining structures to British, Euro, American, and Australian codes and standard etc. Please check my profile, chat me up to share more details and discuss further, then agree on timeline and budget. Thanks in anticipation. Best regards, Israel
$24 CAD v 40 dneh
5,0 (19 ocen)
6,9
6,9
Avatar uporabnika
Dear Client! How are you? Hope you are doing well and thank you for posting this project. I am a building architect and structural engineer with more than 6 years of experiences in the fields of architectural drawings and shop drawings. I can offer architectural & structural drawings for permit such as floor plan , elevations,roof plan, MEP drawings, various framing plans and shop drawings... If you show me your own ideas like hand sketches, i will provide you good drawing results what you want. Even if you have not, i will produce good results based on my own creation. Best regards!
$15 CAD v 40 dneh
5,0 (27 ocen)
6,3
6,3
Avatar uporabnika
Hi, This is Kateryna, an architect from Ukraine. I'm very excited to place a bid for your project. I'm very skilled in Auto CAD, SolidWorks, Autodesk Revit, SketchUp, and have professional experience in staircase design. Don't hesitate to award me. I will deliver the perfect result Sincerely
$20 CAD v 10 dneh
4,9 (59 ocen)
6,5
6,5
Avatar uporabnika
Hello sir, I’ve read your project considering the need for an expert in structural engineering to help U with steel fabrication drawings for the mono beam stringer fees I’m a civil engineer holding a master's degree and have more than 5 years of experience in the field, and of course, I can help finish the required task in the required time. (I’ve done more than 50 projects finished successfully _ U can Check my reviews) Similar project as yours can be provided, just kindly inbox me for further details. Regards, Mohammed Zamzam
$30 CAD v 40 dneh
5,0 (48 ocen)
6,3
6,3
Avatar uporabnika
Dear sir! I am a SolidWorks expert and Civil engineer. I checked your job carefully and I have a great interest in your project. I have many experiences in your project and can deliver perfect result within deadlines. You can confirm on my profile page. https://www.freelancer.com/u/korzhkar If you hire me, then your project will be completed more successfully. I am waiting for good news. Best Regards. Karyna
$20 CAD v 40 dneh
4,9 (36 ocen)
6,5
6,5
Avatar uporabnika
Greetings.. im interested...i can provide the stair stee fabrication drawings......please feel free to discuss it with me....i am a PROFESSIONAL ARCHITECT and a CIVIL ENGINEER , with 25 years experience in the field of construction and designing...and currently into Freelancing Cad Business right in the comforts of my home. I have worked in various construction companies preparing DESIGN, CONSTRUCTION, SHOP, and AS-BUILT for various disciplines: Architectural, Structural, Civil, Mechanical, Electrical,Plumbing, FDAS, Auxillary, Interior Design and Fit-outs. In Presentation Drawings, I use only Sketchup + Vray for Exterior and Interior Perspectives. I hope i can get the chance to work with you in the future... Best Regards
$20 CAD v 40 dneh
4,6 (97 ocen)
6,5
6,5
Avatar uporabnika
Hi, I can create steel fabrication drawings for the mono beam stringer. I use SolidWorks and AutoCAD. Please contact me to discuss further details about this project. Thank you for your consideration. Best regards, Bryan
$15 CAD v 40 dneh
4,8 (138 ocen)
6,1
6,1
Avatar uporabnika
I am a mechanical engineer. I can prepare technical manufacturing drawings.
$15 CAD v 40 dneh
4,8 (82 ocen)
6,0
6,0
Avatar uporabnika
Hello there! I can provide you similar shop drawings for your fabrication work. I am expert in CAD as well as experienced in steel, aluminum and metal fabrication works. I can also provide you a schedule of quantity for the cutting of sheets, beams, number of fasteners, weld lend etc. also. I am very much technically understood about this project requirements. If you are interested, we can discuss more in a chat. Thank you!
$20 CAD v 20 dneh
5,0 (46 ocen)
5,7
5,7
Avatar uporabnika
Dear. " Drafting specialist ". I am a building architect and Sketchup/Revit/AutoCAD expert. I have a lot of experiences in architectural drawing for staircase. I can complete in short time with high quality. Please contact with me to discuss more details of your project. I will wait for your reply. Best Regards Qiu Yu
$15 CAD v 40 dneh
4,8 (35 ocen)
5,5
5,5
Avatar uporabnika
Hi, I am very interested in your project and I have rich experience in a similar kind of work. I am a good Mechanical/structural Engineer and I am goot at efficient modelling and Mechanical/structural analysis. I work in Solidworks2021, ANSYS 2021, CAD/CAM, Revit, AutoCAD 2020, Autodesk Fusion 360 and etc. If give me a chance, I will fully satisfy your needs. Lets connect in chat so that We discuss further. kind Regards
$15 CAD v 40 dneh
5,0 (21 ocen)
5,5
5,5
Avatar uporabnika
Hi, read your project description carefully I'm very confident I can help you in Drafting work in AutoCAD. I have 8 years experience in AutoCAD software . Do message me to check my previous works. Best Regards
$20 CAD v 40 dneh
4,9 (30 ocen)
5,8
5,8
Avatar uporabnika
I'm a mechanical engineer and I have 11 years experience designing industrial product, funiture product, plastic product and machine, automatic system Experience type: 3D, 2D models, Render, Sheet metals, Machine and Devices, industrial product, Plastic molds, plastic parts Software program: Autodesk Inventor,Solidworks, Autocad , NX-Siemens I am always glad to cooperate, I guarantee quick lead-time, information of the project is always confidential . Your project will be developed with speed and high quality, as well as all the jobs already accomplished. Please send me a message.
$25 CAD v 40 dneh
4,8 (26 ocen)
5,6
5,6
Avatar uporabnika
Hi, I am expert in drafting. I have more than 8 years experience in drafting. Please check my portfolio. https://www.freelancer.in/u/Piyushkhandve I look forward to working on this project with you. Thanks & regards.
$16 CAD v 40 dneh
4,8 (47 ocen)
5,6
5,6
Avatar uporabnika
Hello, we have reviewed your ad. We are 2 people as architects and engineers. We can give you a real help in this regard with our architectural and engineering skills. We will meet with you at any time and we will give great importance to your ideas as we create the designs. Services we can provide to you: 3D model will be created 3D realistic render images will be shared with you If you wish, 2D painted floor plans will be shared with you. If you wish, cross-section images of your project will be created. If you wish, 3D animation will be created. While doing all these, we will work with you in an interactive way, and we will decide together until the material selection. We can do all this in accordance with the Bim system Revit. Apart from that, we can do whatever you want in sketchup, 3dmax, lumion, vray, autocad, photoshop programs. If you wish, we can also assist you with cost calculations with our engineering skills. We will be happy if you give us the opportunity, we are ready for this valuable challenge, Thank you. Please review our work, all of which belong to us, on our profile
$20 CAD v 40 dneh
4,7 (24 ocen)
5,7
5,7
Avatar uporabnika
Dear Employer! I've checked your posted project "Drafting specialist " carefully. I am a SolidWorks and AutoCAD expert, Civil engineer. I assure you, I'll provide the best quality result according to your instructions. Please award me the project so that we can discuss it more. Have an amazing day! Kind Regards. Yevheniia
$15 CAD v 40 dneh
5,0 (14 ocen)
5,5
5,5
Avatar uporabnika
Hi I would be happy to bid on your project. I have strong skill of staircase design including 3D modeling and steel fabrication 2D drawing by SolidWorks. When you send me your message, I will show my sample work to familiar to your project. The expertise quality is my advantage. Please assign this design to me. I will provide very satisfactory design. Best Regards
$20 CAD v 40 dneh
4,7 (35 ocen)
5,8
5,8
Avatar uporabnika
***TURN YOUR IDEA INTO REALITY*** Hello. I read the job description carefully and believe it has a disruptive, brilliant idea. I can turn your idea into 3d model so that you can go further with your idea. I have been designing engineering projects with Solid works, Auto CAD, inventor, 3Ds max, Siemens NX, ANSYS very hard since 10 years ago. I have worked on similar projects to what you are looking for, and I am confident I can exceed your expectations. I will respect and implement your needs from day one, so that you will be satisfied with the delivered work. I will provide very good after-sales service for this project, you can always count on me after the job is officially finished. A short chat-check won't cost you but can bring us together to success. Kind regards Andrey -------
$20 CAD v 40 dneh
4,9 (34 ocen)
5,3
5,3
Avatar uporabnika
Dear ⭐⭐ I have checked your project details carefully " Drafting specialist ". I am a building architect. I have full experiences in creating of steel fabrication drawings . You can check my previous work similar to your project in my profile. https://www.freelancer.com/u/hunghm08 I can start to work soon, and will finish asap. Please contact me so that I can help you. Thanks.
$20 CAD v 40 dneh
5,0 (27 ocen)
5,0
5,0

O stranki

Zastava CANADA
Canada
0,0
0
Plačilna metoda je verificirana
Član(ica) od okt. 4, 2022

Verifikacija stranke

Hvala! Po e-pošti smo vam poslali povezavo za prevzem brezplačnega dobropisa.
Pri pošiljanju vašega e-sporočila je šlo nekaj narobe. Poskusite znova.
Registrirani uporabniki Skupaj objavljenih del
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Nalaganje predogleda
Geolociranje je bilo dovoljeno.
Vaša prijavna seja je potekla, zato ste bili odjavljeni. Prosimo, da se znova prijavite.