Filtriraj

Moja nedavna iskanja
Filtriraj po:
Proračun
do
do
do
Vrsta
Znanja
Jeziki
    Delovno mesto
    1,980 labview najdenih del, po cenah EUR

    Hello, I have a working labview program with already written functions and I need to add 4 more functions in this program. it's an image viewer program of 3D data. You have 2-3 days to finish the functions either seperately or all in one. I am paying 20 USD for each function and another 20 USD for a description of how the function works. in total about 100 USD These functions are very easy to do for someone with labview experience. The reason I can't do them is because I know very little about labview. I recieved this assignment from college with an already written program. If you're interested contact me and i will send you the project files. The 4 functions are: -User is able to change contrast of the image. -User has to be able to measure distan...

    €93 - €93
    €93 - €93
    0 ponudb

    Hello, I have a working labview program with already written functions and I need to add 4 more functions in this program. it's an image viewer program of 3D data. You have 2-3 days to finish the functions either seperately or all in one. I am paying 20 USD for each function and another 20 USD for a description of how the function works. in total about 100 USD These functions are very easy to do for someone with labview experience. The reason I can't do them is because I know very little about labview. I recieved this assignment from college with an already written program. If you're interested contact me and i will send you the project files. The 4 functions are: -User is able to change contrast of the image. -User has to be able to measure distan...

    €93 (Avg Bid)
    €93 Povprečna ponudba
    1 ponudb

    Hello, I have a working labview program with already written functions and I need to add 4 more functions in this program. it's an image viewer program of 3D data. You have 2-3 days to finish the functions either seperately or all in one. I am paying 20 USD for each function and another 20 USD for a description of how the function works. in total about 100 USD These functions are very easy to do for someone with labview experience. The reason I can't do them is because I know very little about labview. I recieved this assignment from college with an already written program. If you're interested contact me and i will send you the project files. The 4 functions are: -User is able to change contrast of the image. -User has to be able to measure distan...

    €93 (Avg Bid)
    €93 Povprečna ponudba
    1 ponudb
    labview images Končano left

    Hello, I have a working labview program with already written functions and I need to add 4 more functions in this program. it's an image viewer program of 3D data. You have 2-3 days to finish the functions either seperately or all in one. I am paying 20 USD for each function and another 20 USD for a description of how the function works. in total about 100 USD These functions are very easy to do for someone with labview experience. The reason I can't do them is because I know very little about labview. I recieved this assignment from college with an already written program. If you're interested contact me and i will send you the project files. The 4 functions are: -User is able to change contrast of the image. -User has to be able to measure distan...

    €93 (Avg Bid)
    €93 Povprečna ponudba
    1 ponudb

    Hello, I have a working labview program with already written functions and I need to add 4 more functions in this program. it's an image viewer program of 3D data. You have 2-3 days to finish the functions either seperately or all in one. I am paying 20 USD for each function and another 20 USD for a description of how the function works. in total about 100 USD These functions are very easy to do for someone with labview experience. The reason I can't do them is because I know very little about labview. I recieved this assignment for school with an already written program. If you're interested contact me and i will send you the project files. The 4 functions are: -User is able to change contrast of the image. -User has to be able to measure distance...

    €56 (Avg Bid)
    €56 Povprečna ponudba
    1 ponudb

    Hello, I have a working labview program with already written functions and I need to add 4 more functions in this program. it's an image viewer program of 3D data. You have 2-3 days to finish the functions either seperately or all in one. I am paying 15 euros for each function and another 15 euros for a description of how the function works. In total about 80 euros. These functions are very easy to do for someone with labview experience. The reason I can't do them is because I know very little about labview. I recieved this assignment for school with an already written program. If you're interested contact me and i will send you the project files. The 4 functions are: -User is able to change contrast of the image. -User has to be able...

    €108 (Avg Bid)
    €108 Povprečna ponudba
    1 ponudb

    requires a labview program that can simulate thermoelectric power generation from diesel engine using finite difference method.

    €421 (Avg Bid)
    €421 Povprečna ponudba
    6 ponudb

    All the details are there in the link I want you to do the whole project/. As a start just need a small project proposal for approval as described you can download the requirement file from here please check the brief requirement and let me k now if you are able to do it or not with confidence

    €139 - €139
    €139 - €139
    0 ponudb

    All the details are there in the link I want you to do the whole project/. As a start just need a small project proposal for approval as described you can download the requirement file from here please check the brief requirement and let me k now if you are able to do it or not with confidence

    €239 (Avg Bid)
    €239 Povprečna ponudba
    4 ponudb

    Hi, I need someone with high experience on micro-controllers programmable by C language for a wireless project which will use LabVIEW as well, please for more detailed information message me. Regards Robert J. Percy

    €231 (Avg Bid)
    €231 Povprečna ponudba
    11 ponudb
    basic labview vi's Končano left

    I need several VI's created over the next couple of months. The first one is pretty basic. When the program begins, the steps in parrallel are: 1) record Thermocouple #1, 2) record Thermocouple #2 3) use a 5VDC relay to send 12V to a device (a simple 12V fan) (12V will come from a voltage suppply and 4) use a 5VDC relay to send 12V (again, a separate 12V power supply) to a device (thermoelectric heater) for X seconds, X=1-400. So again, the idea would be that when you press start, both thermocouples begin logging temperature, the fan turns on and stays on, and the thermoelectric heater turns on for a prescribed number of seconds. When you press stop, the thermocouples stop logging and the fan turns off. The thermoelectric heater would already be off at this point.

    €69 (Avg Bid)
    €69 Povprečna ponudba
    12 ponudb

    I need to creat a VI that is going to measure a load cell in pounds.. ultimately the goal is to use the load cell as a three point bending test to see how much force a ceramic material can hold so therefore i need a VI that is going to read this measurements for me. DAQ: NI USB-6008 Power Supply: BK PRECISION 1786B 0-32V/0-3A Single output programmable DC power Supply Load Cell: this is the one ;flag=1

    €28 / hr (Avg Bid)
    €28 / hr Povprečna ponudba
    1 ponudb

    hello, i need to create a VI using labview that is going to be able to read force from a load cell email me: moraz@

    €37 / hr (Avg Bid)
    €37 / hr Povprečna ponudba
    1 ponudb

    hi, labview vi for more details please check the attached file please bid within the budget thanks

    €159 (Avg Bid)
    €159 Povprečna ponudba
    4 ponudb
    €4531 - €4531
    0 ponudb
    CEMS Using LABVIEW Končano left

    I Want to , Have a CEMS , Centralized Energy Management System , consist of the sources (Wind+PV+Diesel) , as the Input system could generate maximum 75 KVa Power , and then interaction with a load such as if load increase generation increase , efficiency of the System Please look at the Budget .. i can only get this

    €58 (Avg Bid)
    €58 Povprečna ponudba
    4 ponudb

    Complete communication system based on QPSK modulation technique. System level design and simulation using MATLAB or LabVIEW with at least 50 page project report.

    €276 (Avg Bid)
    €276 Povprečna ponudba
    15 ponudb

    Design of PID Controlled oven.A new PID Temperature controler has to be designed and evaluate using labview.I want all the simulations to be done in one dayThe design and the simulinks should be in labview I want everything to be done n 24 i have to submit my project in one day and i have to show and run all the simulations to my you could do and send me all the simulations in this short time and explain them how to run them then do let me also the charges you would like to quote for this reply ASAP.I have to show my project on 25th ,you have to send me by 24th night.

    €519 (Avg Bid)
    €519 Povprečna ponudba
    3 ponudb

    Design of PID Controlled oven.A new PID Temperature controler has to be designed and evaluate using matlab simulink software or labview.I want all the simulations to be done in one dayThe design and the simulinks should be either in labview or matlab.I want everything to be done n 24 i have to submit my project in one day and i have to show and run all the simulations to my you could do and send me all the simulations in this short time and explain them how to run them then do let me also the charges you would like to quote for this reply ASAP.I have to show my project on 25th ,you have to send me by 24th night.

    €97 (Avg Bid)
    €97 Povprečna ponudba
    4 ponudb

    un programa con las funcionalidades del "ROBOLAB" o LABVIEW para programar los microcontroladores PIC, mediante ícinos y menús contextuales (sin tener que escribir código), adecuado a un hardware propio y grabar el ejecutable (*.hex) por USB.

    €1007 (Avg Bid)
    €1007 Povprečna ponudba
    5 ponudb

    This order require bidder to complete a project of 4 small parts using Labview software. The client need complete the project by the 5 requirements given within 18 hours . If you can complete the project with quality report submitted, do bid, budget is around 80USD The guide is attached, please check carefully before you bid ,thanks

    €81 (Avg Bid)
    €81 Povprečna ponudba
    7 ponudb
    LABVIEW PXI Končano left

    Hello, I need a software to simulate the power delay in a wireless system on Labview using PXI, in other words simulate sounding to see the behavior of multipath waves arriving at the receiver

    €440 (Avg Bid)
    €440 Povprečna ponudba
    2 ponudb

    We are running a science experiment in our garage, using LabView 2012. We have a LabView application written by a local phd grad student, but he is frequently too busy, and will be graduating soon. The experiment is an electrochemical process taking place inside a calorimeter. Temperatures inside and outside the reactor are monitored. Pressure inside the reactor is monitored. Electrical power supplied to the reactor is monitored and controlled (to have constant power). Data is captured by a NI DAQ, with thermocouple modules, and a voltage input module for capturing signals from the pressure sensor. Electrical current is provided by an Agilent DC power supply, through a GPIB interface. Our software works, but we need to have some upgrades: 1) moving time averaging to ...

    €231 - €694
    Zapečateno
    €231 - €694
    6 ponudb

    We need experienced Labview programmer to write first simple vi file. We look forward working together to have many projects in future. If you have C++ and LV experiences, it will be the right partner. The first vi is: 1. Programmed the NI Instrument (TBD) to output CW from Start freq. to Stop freq. (in X steps) and setting output level from VI Front Panel. Will provide simple example for this. 2. wait sometime (setting from VI front panel) 3. Capture the TX output in step 1 and measure the powers in dBm 4. Write the measurements into a text file: each line for every measurement per frequency. Each line has three columns: frequency (GHz), TX power (dBm) and RX Power (dBm). You need Labview 2010 for this simple vi. We will pay only after receiving and testing your ...

    €73 (Avg Bid)
    €73 Povprečna ponudba
    6 ponudb

    Dot matrix display ...graphics can be displayed. That is done through the use of the dot matrix controller which converts instructions from a processor into signals that turns on or off lights in the matrix so that the required display is produced. In this design problem, an implementation of dot matrix was implemented using LabView and Digital trainer kit. The application that was implemented is to display a certain character and make it to move throughout the matrix. In this design, a VI was build on the LabView program that takes care of generating the needed signal to the e DAQ which is in turn supplies the signal to the dot matrix on the digital trainer board. In this design report, the hardware used along with the block diagram are presented, the n the software deta...

    €637 (Avg Bid)
    Izpostavljeno
    €637 Povprečna ponudba
    9 ponudb

    Saludos. Tengo una pàgina html creada con el software Labview, quiero montarla en una pagina web para poder visualizarla desde cualquier lugar del mundo a trevès de una url. La html maneja paneles remotos para controlar un sistema electrònico. Me gustarìa que alguien me cotice el trabajo por favor.

    €45 - €91
    €45 - €91
    0 ponudb

    Hi, I need help doing these works on labview 2011. Please look through it and whether you are ok with the price i set. I only need lab06 without the prelab done(including the post lab which is BLPF Frequency domain vi, Better Low-pass Filter sub VI, Simulate ECG Signal with the better LPF and notch filter) lab07 with the prelab and post lab done. thank you

    €42 (Avg Bid)
    €42 Povprečna ponudba
    1 ponudb
    Labview 2011 work Končano left

    Hi, I need help doing these works on labview 2011. Please look through it and whether you are ok with the price i set. I only need lab06 without the prelab done(including the post lab which is BLPF Frequency domain vi, Better Low-pass Filter sub VI, Simulate ECG Signal with the better LPF and notch filter) lab07 with the prelab and post lab done. thank you

    €42 - €42
    €42 - €42
    0 ponudb

    Need to do the job and the files uploaded $30 fixed price. Need solid knowledge of labview to be able to do this job.

    €35 (Avg Bid)
    €35 Povprečna ponudba
    3 ponudb

    I am a C++ and Windows API beginner and have been trying to develop a WinUSB driver set for Labview. I have concluded that accessing the WinUSB API using C++ and calling initialize, read, write, and close C++ dll's from Labview is the way to go. I managed to get communications with my device which is a data stream over USB previously accomplished using a serial port but am still having problems. I need someone who knows what they are doing. Problems: - My original design was around Microchip ver 5 drivers. Since then they have updated to ver 8 which changed the USB device structure from 1 interface with three pipes to 2 interfaces with interrupt pipe on interface 1 and bulk pipes on interface 2. I can't access interface 2 for some reason. - Once communicating I...

    €265 / hr (Avg Bid)
    €265 / hr Povprečna ponudba
    4 ponudb

    Project Sales Representative - to sell our services, provide us with customers, leads and to close sales with customers requiring outsourced electronic design services in Canada. Payment is provided as a percentage of final sale to customer (to be determined upon size of project). AVT Inc. provides pr...for our customers. AVT designers utilize the latest Tools and methods to produce quality finished results. Our knowledge of fabrication, assembly and Layout for ATE creates the manufactured results the first time. Our typical turn design time is 10 day standard and 5 day expedite for most designs. Software/Firmware Development We use C/C++, Visual Basic, Java, assembly language, LabVIEW, and other languages to develop complete applications, drivers, and embedded...

    €107 (Avg Bid)
    Izpostavljeno Za polni čas
    €107 Povprečna ponudba
    3 ponudb

    ...Google Analytics , Google App Engine , Google Buzz , Google Checkout , Google Chrome , Google Earth , Google Go , Google Plus , Google Wave , Google Web Toolkit , GPGPU , Grease Monkey , Hadoop , Haskell , HP Openview , HTML , HTML , IBM Tivoli , IIS , Interspire , JEE , Java , JavaFX , Javascript , Joomla , jQuery / Prototype , JSP , Kinect , LabVIEW , Link Building , Linkedin , Linux , Lotus Notes , Mac OS , Magento , Map Reduce , • Metatrader , Microsoft , Microsoft Access , Microsoft Exchange , Microsoft Expression , MMORPG , MODx , Moodle , MVC , MySpace , MySQL , Nginx , Ning , node.js , NoSQL Couch & Mongo , Objective C , OCR , Open Cart , OpenCL , OpenGL ...

    €449 (Avg Bid)
    €449 Povprečna ponudba
    14 ponudb

    We want to interface the Modbus data from PLC's which is stored in an Industrial PC to the screens developed in Labview. The PLC logic, Automation panels are all ready and the Drawings are also made using Labview. Only dynamic linking of Data to Labview is needed.

    €370 (Avg Bid)
    €370 Povprečna ponudba
    1 ponudb

    ...advanced Arduino skills. The Scope: - Connecting an Arduino with a I2C 6DOF (3 Axis Gyro, 3 Axis Accelerometer) - Creating a software that reads the 6DOF from a serial port and: - Displays the accelerometer movement in 3 axis graphs and log peaks. - Displays the Gyro movement in 3 meters The software can be a Java app, C (Bonus if you can write for OsX), Processing or even through a LabView Instrument. There is already almost complete code available in open source that does most of the Arduino Sketch bit here: It is important that your code will be detailed in annotation. In any way you choose to deliver, I would require a full set of instructions of replicating the setup or work environment. Hardware

    €244 (Avg Bid)
    €244 Povprečna ponudba
    14 ponudb

    Here's what we are trying to do. With National Instrument USB “NI USB-6009” and LABView, we would like to build simple systems that will read voltage from a sensor and control some Digital I/O in a simple graphical user interface.

    €255 (Avg Bid)
    €255 Povprečna ponudba
    2 ponudb

    We are looking for a candidate that would be able to make a project with following tasks on iPhone: - acquire in real time audio (using iPhone microphone) - calculations (using FFT and algorithm done with Labview) - Config screen - Show a curve The candidate shall present his/her previous works done with audio processes

    €587 (Avg Bid)
    €587 Povprečna ponudba
    9 ponudb

    Hi, I need a program made in LabView, using any type of neural network. The program must be capeable of: Be trained in 4 words. Understand that words. Make an output signal referencing what word understand. It must NOT use the voice recognition of LabView module. The software can work in a very controlled ambient. Atte. Luis Gerardo

    €167 (Avg Bid)
    €167 Povprečna ponudba
    1 ponudb

    Machine vision project using labview... Project will enable to accepts video feeds of road lane from webcam and should be able to detect and track road lanes at different conditions (e.i. with minimum lights; with shadows; with other cars in front; etc.).

    €367 (Avg Bid)
    €367 Povprečna ponudba
    3 ponudb
    Labview new project Končano left

    A labview expert is needed who have a DAQ card such as USB 6343. the project is related to digital waveforms,,,sending and receiving. there is a previous project which is similar to my project. for full information,,,please do not hesitate to contact me.

    €101 (Avg Bid)
    €101 Povprečna ponudba
    10 ponudb
    Labview programming Končano left

    I am looking for some one to develop VI's to control a sensor that I am developing. You can remotely login and program the machine hooked to the DAQ system. I will provide step-by-step instructions on what the VIs are expected to do. Work mostly involves synchronous data acquisition and some signal processing. Start with some small projects for now but there is plenty of work in future.

    €239 (Avg Bid)
    €239 Povprečna ponudba
    9 ponudb

    Hi all, Need to acquire data such as torque, power, fuel counts, rpm etc from the engine using labview program via rotatory encoder. Also need to control the fuel injection pump cheers

    €35 / hr (Avg Bid)
    €35 / hr Povprečna ponudba
    8 ponudb

    ...FoxPro FTP Game Development Game Programming Geolocation Go Google App Engine Google Maps Google Web Toolkit Hibernate Honeycomb HTML HTML5 Hyperion Informatica Informix Infusionsoft Internet Information Services (IIS) Internet Security Interspire iOS iPad iPhone J2EE J2ME Java JavaScript Jboss JDBC Jetpack JomSocial Joomla! jQuery JSharp JSON JSP Juniper Kernel LabVIEW LabWindows/CVI LAMP Lawson Liferay Link Building LinkedIn Linux Mac OS Mac OS X Magento MATLAB Microsoft Access Microsoft Azure Microsoft Commerce Server Microsoft Dynamics Microsoft Dynamics AX Microsoft Dynamics CRM Microsoft Dynamics GP Microsoft Dynamics NAV Microsoft Dynamics SL Microsoft Lync Microsoft Office Live Web Design Microsoft Sharepoint M...

    €719 (Avg Bid)
    €719 Povprečna ponudba
    18 ponudb

    We have already have a program, written in Labview, which records data from several different types of instruments. You will improve the style, ease of use and scalability of the program. I have listed this project as a small project. Additional stages of the project will be posted, depending on how well the first part works. If you are only able to complete part of the project, that will be fine, so long as it is useable code which accomplishes some of the goals. Here is an overall description of what we would like to do: - Each different instrument needs a driver to acquire data from the instrument and pass this onto the data logging portion of the program. Currently, most code is contained within a few VI's and everything is inside one main program. I would...

    €387 (Avg Bid)
    €387 Povprečna ponudba
    10 ponudb

    I have a tutorial that was developed at my company for training/interviewing purposes to hire new engineers for summer internships. I need someone to provide me with the source code to the programs in the tutorial. All the source code is provided. You can use any version of National Instrument LabVIEW. ## Deliverables See pdf file attached

    €28 - €93
    €28 - €93
    0 ponudb
    Labview Project Končano left

    A labview expert is needed who knows how to deal with DAQ, NI-HSDIO Driver Software and Digital waveform editor to send and receive digital signals to and from more than one source. The maximum budget is 100 GBP. If you are interested plz tell me and I'll provide you with all the details that you want.

    €87 (Avg Bid)
    €87 Povprečna ponudba
    6 ponudb
    labview project Končano left

    I have a project in labview in which i am gonna use NI 6009 DAQ. Can you offer help in this project. If yes send me you contact details (Mail). Regards, Ferasl

    €105 (Avg Bid)
    €105 Povprečna ponudba
    1 ponudb
    HUB project Končano left

    Hello, I have a project in labview if you can do it. here is the description of the project. A daq 6009 will be connected with four electrodes which stimulate neural tissue. Digital waveforms will be sent through the DAQ to the test boards and the DAQ will receive digital waveforms from the test boards and show it on graph. The digital waveforms will be designed by National instrument waveform editor. The generated digital waveform will be sent through the DAQ to the test boards which are connected with the electrodes. There should be user control on these signals and control on which electrode to stimulate of the four electrodes.

    €52 (Avg Bid)
    €52 Povprečna ponudba
    1 ponudb

    I have a small project on labview and DAQ software related. I will pm after knowing the bid and expert details Basically my project is to generate digital waveforms and send them through (NI USB DAQ 6009) to stimulate four electrodes. at the same time i wanna also receive a digital waveforms from these electrodes. All this process by using labview software.

    €136 (Avg Bid)
    €136 Povprečna ponudba
    11 ponudb

    Basically my project is to generate digital waveforms and send them through (NI USB DAQ 6009) to stimulate four electrodes. at the same time i wanna also receive a digital waveforms from these electrodes. All this process by using labview software. ========================================================= please dont accept the hire until we discuss

    €28 - €28
    €28 - €28
    0 ponudb

    Wanted an experienced LabVIEW programmer / Consultant, who can audit and heck our LabVIEW Software for a Data Acquisition Project. The Code is already written. It has to be checked and tested thoroughly.

    €269 (Avg Bid)
    €269 Povprečna ponudba
    11 ponudb

    Top labview člankov Skupnosti