GPS Experts Za najem

  • GPS
Predlogi:
več

Države

Specifična lokacija

Izpiti

Urna postavka (USD)

Ocene

Na voljo

Prikazanih 22 rezultatov
  • Najemi     engmahmoudsaber3
Najemi     engmahmoudsaber3

    engmahmoudsaber3 engmahmoudsaber3

    Egypt $10 USD/uro
    An expert in Arduino programming
    Egypt
    2.2
    1 ocena 1 ocena $10 USD na uro
    _5 years experience in the field of refrigeration and air conditioning (In addition to 3 years of experience in dealing with ammonia refrigeration compound) _I unveiled an integrated Arduino smart control system at Nestle Ice Cream Company _I made a car robot that avoids obstacles _I made a Bluetooth controlled...
    _5 years experience in the field of refrigeration and air conditioning (In addition to 3 years of experience in dealing with ammonia refrigeration compound) _I unveiled an integrated Arduino smart control system at Nestle Ice Cream Company _I made a car robot that avoids obstacles _I made a Bluetooth controlled robot and showed me its location on the phone _I made a Wi-Fi-controlled robot _I made an integrated smart control in a mini city _Establish sterilization portals to prevent the emerging coronavirus _I made a robot that is used for protection and it shows me the temperature and humidity of the place and it also shows me the percentage of gas in the place and can send me the percentage of lighting in the place and the distances around it circuit Design -fritzing -proteus -Tinkercad -PCB design manj
  • Najemi engmahmoudsaber3
  • Najemi     macroenergy
Najemi     macroenergy

    macroenergy macroenergy

    Turkey $25 USD/uro
    Electronics Engineer
    Turkey
    0.0
    0 mnenj 0 mnenj $25 USD na uro
    DearSir, My background is related with: -Digital Motor Control -Analog Design -Electronic Design -PowerElectronics -Renewable energy -PCB design -Embedded system -Matlab -Simulation of hardware For each concept descriptions are as follows: Digital Motor Control: -3-phase induction motor vector control drive -Flux...
    DearSir, My background is related with: -Digital Motor Control -Analog Design -Electronic Design -PowerElectronics -Renewable energy -PCB design -Embedded system -Matlab -Simulation of hardware For each concept descriptions are as follows: Digital Motor Control: -3-phase induction motor vector control drive -Flux estimation algoritm generation -DSP(TMS320) implementation on motor drive -Low speed application -Torque and speed loop generation -Control algoritms -BLDC motor -Step motor -DC motor Analog design -Low power distribution -Noissless special opamp based analog circuits -Analog filters -Orcad simulation of several circuits Electronic Design -RF transmitter and receiver -Bluetooh reade rand transmitter -Magneticreader PowerElectronics -Implementation motor drive -AC/DC converter -DC-DC converter -Battery charger -Solar inverter -Renewable Energy -Uninterruptle power supplies PCB design -Schematic design by Altium -PCB design by Altium -Power board design -SMPS board design -Easyeda -CAD files of manufacturers Embedded system -ESP32,ESP8266,modules -Bluetooth and Wifi -PIC18,PIC24,PIC30 and dsPIC applications -Ardino -MSP430 -Atmel -DSP(Texas Instruments) -Renesas -STM32 -C2000 Matlab -Power Electronics simulation -Motor drive -WindEnergy -Solar Energy -Control applications Simulation of Hardware -Orcad Simulation (TI,National, LinearTech, Maximlibraries) -LTI -National -Matlab -Easyeda manj
  • Najemi macroenergy
  • Najemi     nikitamorozzz
Najemi     nikitamorozzz

    nikitamorozzz nikitamorozzz

    Ukraine $40 USD/uro
    Electronics Engineer & Firmware Developer
    Ukraine
    0.0
    0 mnenj 0 mnenj $40 USD na uro
    Hi I’m an PCB designer who have 5+ years of experience in designing Power electronics, analog and digital circuit design, RF field and antenna design. Main Skills  Schematic and PCB design  Embedded Software/Firmware development • I2C, I2S, SPI, RS232/RS485, USB • BLE/Bluetooth, WiFi, Zigbee, Lora, RFID  Analog and...
    Hi I’m an PCB designer who have 5+ years of experience in designing Power electronics, analog and digital circuit design, RF field and antenna design. Main Skills  Schematic and PCB design  Embedded Software/Firmware development • I2C, I2S, SPI, RS232/RS485, USB • BLE/Bluetooth, WiFi, Zigbee, Lora, RFID  Analog and Digital circuit design and simulation using Altium, Multisim and Proteus  RF Antenna and Circuit Design and Simulation using CST and Keysight ADS. Development Tools  Keil, STM32CubeIDE, STM32CubeMX  Arduino IDE, IAR, MPLAB X/IDE, MikroC,  Quartus II, Xilinx, Vivado  Altium, Eagle, Dip trace manj
  • Najemi nikitamorozzz
  • Najemi     tregor1990
Najemi     tregor1990

    tregor1990 tregor1990

    Russian Federation $30 USD/uro
    Senior Electronic Engineering/Designer
    Russian Federation
    0.0
    0 mnenj 0 mnenj $30 USD na uro
    I have been working for more than 5+ Year in the field of PCB designing and layout, firmware programming, and rapid prototyping. I have the energy and wisdom to design products for today’s technical challenges. Here is a non-exhaustive list of software skills and chipset familiarity: Since then I've offered my...
    I have been working for more than 5+ Year in the field of PCB designing and layout, firmware programming, and rapid prototyping. I have the energy and wisdom to design products for today’s technical challenges. Here is a non-exhaustive list of software skills and chipset familiarity: Since then I've offered my services to help big and small businesses solve the hardware and firmware problems they face. Look through my portfolio, and feel free to ask how my experience can help you solve your problems. From an idea, to requirements, prototypes, proof of concept, and finally production. You can expect a professional design, every time. I won't take a job I cannot confidently finish. Best regards manj
  • Najemi tregor1990
  • Najemi     slavaten
Najemi     slavaten

    slavaten slavaten

    Russian Federation $35 USD/uro
    Embeded / Electronics developer
    Russian Federation
    0.0
    0 mnenj 0 mnenj $35 USD na uro
    Experienced in: Embedded programming for ARM/AVR/PIC - Electronic schematic and PCB design. -Mobile apps for Android including writing drivers and realtime apps. - Strong mathematic and physics background.
    Experienced in: Embedded programming for ARM/AVR/PIC - Electronic schematic and PCB design. -Mobile apps for Android including writing drivers and realtime apps. - Strong mathematic and physics background. manj
  • Najemi slavaten
  • Najemi     dmytrop2020
Najemi     dmytrop2020

    dmytrop2020 dmytrop2020

    Ukraine $30 USD/uro
    Senior Hardware & Software Engineer
    Ukraine
    0.0
    0 mnenj 0 mnenj $30 USD na uro
    Hello to all and welcome to my profile. My name is Dmytro and i am from Ukraine. I have 2 degrees - one is electronic and second is programming. During my education i also studied physics. I have over 15 years of experience in hardware/software engineering. After education i have 7 years of work experience on...
    Hello to all and welcome to my profile. My name is Dmytro and i am from Ukraine. I have 2 degrees - one is electronic and second is programming. During my education i also studied physics. I have over 15 years of experience in hardware/software engineering. After education i have 7 years of work experience on electronic factory and next 8 year I worked in European companies - so i have enough of knowledge to build digital devices and smarty gadgets. My main services: 1. Hardware design (Electronic schematic & PCB). 2. Firmware programming. 3. Working with different microcontrollers (ATMega, STM, ESP32, etc..). 4. Working with FPGA (Intel and Xilinx). 5. Working with SoC (System on Crystal). 6. Device Prototyping. 7. Device Serial Manufacturing. My Goal is Quality and Quick development so i do my best to my customers will be satisfied. Will be happy to cooperate with you!:) Thank you. manj
  • Najemi dmytrop2020
  • Najemi     gismaster1
Najemi     gismaster1

    gismaster1 gismaster1

    Russian Federation $20 USD/uro
    GIS expert
    Russian Federation
    0.0
    0 mnenj 0 mnenj $20 USD na uro
    Master Degree of Computer Sciences. Over 10 years of experience in Geoinformation Systems development. Skills: - interactive map development, - geospatial data entry - data visualization, - geodata conversion, - geodata transformation, - geospatial analysis, - cartography, - vectorization, - digitizing maps, -...
    Master Degree of Computer Sciences. Over 10 years of experience in Geoinformation Systems development. Skills: - interactive map development, - geospatial data entry - data visualization, - geodata conversion, - geodata transformation, - geospatial analysis, - cartography, - vectorization, - digitizing maps, - tracing of map data, - cadastre, - route map, - precision agriculture Tools and frameworks: - PostgreSQL, - PostGIS, - GDAL/OGR - Node.js, - QGIS, - UMN Mapserver, - Leafletjs, - gvSIG, - JOSM, - ArcGIS Online, - Mapbox GL, - HERE Map JavaScript API Languages: - PHP, - JavaScript, - Python, - c++/c#, - QT, - SQL Formats: - Shapefile, - GeoJSON - GeoJSON for ServiceNow Facilities Workbench map, - GeoTIFF, - KML - Vector Tiles (mbTiles, .PBF) - netCDF. manj
  • Najemi gismaster1
  • Najemi     danielgrapher
Najemi     danielgrapher

    danielgrapher danielgrapher

    Mexico $20 USD/uro
    Embedded Hardware & Firmware Development
    Mexico
    0.0
    0 mnenj 0 mnenj $20 USD na uro
    Me especializo en el desarrollo de sistemas a la medida. Me distingo por realizar análisis de mercado y tecnologías que puedan integrarse para un producto exitoso. Realizo la programación de microcontroladores y diseño de circuitos impresos.
    Me especializo en el desarrollo de sistemas a la medida. Me distingo por realizar análisis de mercado y tecnologías que puedan integrarse para un producto exitoso. Realizo la programación de microcontroladores y diseño de circuitos impresos. manj
  • Najemi danielgrapher
  • Najemi     ismailvawda
Najemi     ismailvawda

    ismailvawda ismailvawda

    Singapore $25 USD/uro
    Electronics Engineer
    Singapore
    0.0
    0 mnenj 0 mnenj $25 USD na uro
    Hardware -PCB Design (Rigid, Flex, Rigid-Flex) -PCB Schematics and Layouts -Analogue and Digital Electronics Design -IoT& Wireless (BLE, WiFI, sub-1GHz) -Power Supplies -Embedded System Development -Proof of Concept and Prototyping -Reverse and Re-engineering -PCB Manufacturing and Assembly (Trade Partners) -Component...
    Hardware -PCB Design (Rigid, Flex, Rigid-Flex) -PCB Schematics and Layouts -Analogue and Digital Electronics Design -IoT& Wireless (BLE, WiFI, sub-1GHz) -Power Supplies -Embedded System Development -Proof of Concept and Prototyping -Reverse and Re-engineering -PCB Manufacturing and Assembly (Trade Partners) -Component Selection, Procurement and Kitting -Fault-finding, Diagnostics and Testing Software -Artificial Intelligence -Facial Recognition -NVIDIA Jetpack -CUDA, cuDNN and TensorRT -OpenCV -Tensorflow -C/C++/Python manj
  • Najemi ismailvawda
  • Najemi     alaminabdo53
Najemi     alaminabdo53

    alaminabdo53 alaminabdo53

    Nigeria $15 USD/uro
    Type your data into Excel due to my free schedule
    Nigeria
    0.0
    0 mnenj 0 mnenj $15 USD na uro
    I have work with optical and microwave sensor data to solve multiple remote sensing and GIS. confidently I can handle this analysis. Relevant Skills and Experience I am skilled in Machine learning with R, Google Earth engine, jupyter notebook, ArcGIS, Erdas imagine Qgis, surfer and global mapper, HEC Ras...
    I have work with optical and microwave sensor data to solve multiple remote sensing and GIS. confidently I can handle this analysis. Relevant Skills and Experience I am skilled in Machine learning with R, Google Earth engine, jupyter notebook, ArcGIS, Erdas imagine Qgis, surfer and global mapper, HEC Ras AutoCAD. programming languages: - Python - JavaScript - R - Netlogo - C ++ you can find samples of my work on #thepowerofgis on Facebook, Twitter and LinkedIn manj
  • Najemi alaminabdo53

Živjo , tukaj je nekaj freelancerjev zunaj omrežja

Živjo , tukaj je nekaj freelancerjev ki se ujemajo ""