NASA Contest: Design a Mechanically Driven Clamp

  • Stanje: Closed
  • Nagrade: $250
  • Prejetih vnosov: 19
  • Zmagovalec/ka: NinoWunderlin

Navodila natečaja

Design a Mechanically Driven Clamp (MDC)

In this challenge, you are asked to design a Mechanically Driven Clamp (MDC) that will be mounted on, and driven by, a separately designed robotic arm. The MDC receives mechanical power (either by a rotary shaft or linear actuator) that it must convert into the desired actions.

How it works: Initially, the MDC will be positioned at a Handrail, in a ready-to-clamp orientation. When powered, the MDC must be capable of performing three high-level actions:

1) close on the Handrail,
2) maintain a hold for an extended period of time and
3) release from the handrail.

Click on the links below to see detailed design instructions, constraints and solution templates for this problem.

Challenge rules:
The prize will be awarded for the lowest mass, technically feasible solution, submitted by the contest deadline.
No working prototype is required for submission, but the design must be sufficiently detailed to allow experts to assess the feasibility of your design (i.e., comply with all requirements) and the credibility of your mass estimate.
Only complete submission packages will be evaluated.

Priporočene spretnosti

Najboljši vnosi tega natečaja

Poglej več vnosov

Javna tabla za pojasnila

  • nasacoeci
    Nosilec natečaja
    • pred 5 let

    Please join us in congratulating Nino W. as the winner for this challenge. Thanks to all of the participants for all of your hard work on this challenge. There were some really amazing designs and the evaluation was not easy.

    • pred 5 let
    1. MarkBravo1
      MarkBravo1
      • pred 5 let

      Ok, I understand. Thanks for considering my observations.

      • pred 5 let
    2. TriassicXYZ
      TriassicXYZ
      • pred 5 let

      Thanks for the clarification, NASA

      • pred 5 let
  • MarkBravo1
    MarkBravo1
    • pred 5 let

    Also I consider Triassic is right. The criteria for choosing the winner should also emphasize the instant releasing under the “excessive load” condition. If your mechanism is not fast enough (because actuator has to be commanded in order to be released) then it may not open on time when an Astronaut hits accidentally the AstroBee. Actually the AstroBee and/or Astronaut will absorb the force peak in sudden strokes. And yeah, I also prefer the frictionless "pull-away" implementations, that is a nice-to-have overlooked feature :D

    • pred 5 let
    1. nasacoeci
      Nosilec natečaja
      • pred 5 let

      Marco & Triassic, Thanks for your feedback. We are examining the issue that you have raised. We have several updates/tasks that we are working at the moment since there we are managing several active and upcoming challenges. Thanks for your patience as we study the issue.

      • pred 5 let
  • MarkBravo1
    MarkBravo1
    • pred 5 let

    Seems that 7 of us (40% of all the participants) interpreted the requirements the same way. We embedded the "pull-away" and "excessive load" functions in our mechanical designs, as we used springs or some other elements to release the handrail mechanically during those conditions.

    Please consider that this may not have been a design decision, but the way the requirements were interpreted, that the MDC should be responsible for performing everything by itself, without the AstroBee Arm Control assistance. Probably the same pattern will be seen in the EDC contest.

    • pred 5 let
  • MarkBravo1
    MarkBravo1
    • pred 5 let

    Congrats Nino :)

    • pred 5 let
  • nasacoeci
    Nosilec natečaja
    • pred 5 let

    This contest is now closed. Thank you for all of your hard work on some really great designs. The team will be evaluating the submissions and announcing the winners as soon as we can (likely about a week). There are several other contests currently active with even more launching this month. We look forward to seeing more of this amazing talent! Thanks!

    • pred 5 let
  • jianhhe
    jianhhe
    • pred 5 let

    Sorry again, I find a dimension mistake in my submission: entry 12. So, I modified it and re-submit. Pls. ignore the entry 12. Thanks a lot.

    • pred 5 let
  • engFady84
    engFady84
    • pred 5 let

    yes Can we please have the 5 days extention?

    • pred 5 let
    1. nasacoeci
      Nosilec natečaja
      • pred 5 let

      It has been extended.

      • pred 5 let
  • GabrielBorjaM
    GabrielBorjaM
    • pred 5 let

    Is this extended? I see 5 days remaining

    • pred 5 let
  • TriassicXYZ
    TriassicXYZ
    • pred 5 let

    Is this extended? I see 5 days remaining

    • pred 5 let
  • yesidgp
    yesidgp
    • pred 5 let

    #extended please.

    • pred 5 let
  • varunvp
    varunvp
    • pred 5 let

    What exactly do you mean by break away force? Should the material fail at that force? Or should the gripper go to the released configuration? Also, #extended please.

    • pred 5 let
    1. nasacoeci
      Nosilec natečaja
      • pred 5 let

      There are described breakaway forces in the contingency forces section. The MDC is allowed to break away/detatch from the ISS Handrail when those forces are applied, but afterwards, it must be able to resume normal operations if commanded to do so. This means that no part of the MDC is to break such that the MDC cant be continued to be used.

      • pred 5 let
  • varunvp
    varunvp
    • pred 5 let

    Also, what do you mean exactly by loop of material?

    • pred 5 let
    1. nasacoeci
      Nosilec natečaja
      • pred 5 let

      This is meant to describe wires, strings or threads that could catch on things in the ISS.

      • pred 5 let
  • itsnaitsme
    itsnaitsme
    • pred 5 let

    #extended please

    • pred 5 let
  • ashishnalpady007
    ashishnalpady007
    • pred 5 let

    Done!

    • pred 5 let
  • nasacoeci
    Nosilec natečaja
    • pred 5 let

    Please refer to the contest description and the attached submission guidelines for all of the elements required for this contest. Make sure you take the exit survey and include the resulting code in your submission.

    • pred 5 let

Pokaži več komentarjev

Kako začeti z natečaji

  • Objavi ta natečaj

    Objavi svoj natečaj Hitro in preprosto

  • Prejmi na tone vnosov

    Prejmi na tisoče vnosov S celega sveta

  • Dodeli natečaj najboljšemu vnosu

    Dodeli natečaj najboljšemu vnosu Prenesi datoteke - Preprosto!

Objavi natečaj zdaj ali pa pridruži se nam še danes!